Manual

2012/1/202012/1/20
IMBA-G410 ATX Motherboard
Page 85

Manual Mode
by RPM
The fan spins at the speed set in Manual Mode by
RPM settings

Manual Mode
by Duty-Cycle
The fan spins at the speed set in Manual Mode by
Duty-Cycle settings
 NB Te m p . Limit of Highes t / Second / Third / Lowes t [n]
Use the + or – key to change the NB Temp. Limit of Highest / Second / Third / Lowest
value. Enter a decimal number between 0 and 127.
 NB Fan Highest Setting [100]
F81865 only support full speed in highest speed value.
 NB Fan Second / Third / Fourth / Lowest Setting [n]
Use the + or – key to change the NB Fan Second / Third / Fourth / Lowest speed. Enter
a decimal number between 12 and 100.
 Monitored Values
The following system parameters and values are shown. The system parameters that are
monitored are:
 The following system temperatures are monitored:
o CPU Temperature
o System Temperature
 The following fan speeds are monitored:
o CPU Fan Speed
o NB Fan1 Speed
 The following core voltages are monitored:
o VCC3
o VCC_Core
o VIN1_1.5V
o VIN2_5V
o VIN3_12V
o VSB