Instruction Manual

2012/1/202012/1/20
IMBA-G412ISA ATX Motherboard
Page 51
Jumper Location:
See Figure 4-8
The AT Power Select jumper specifies the systems power mode as AT or ATX.
Setting Description
Open Use ATX power (Default)
Short Use AT power
Table 4-2: AT/ATX Power Select Jumper Settings
Figure 4-8: AT/ATX Power Select Jumper Location
4.4.2 Clear CMOS Jumper
Jumper Label: J P1
Jumper Type:
3-pin header
Jumper Settings:
See Table 4-3
Jumper Location:
See Figure 4-9
To reset the BIOS, move the jumper to the "Clear BIOS" position for 3 seconds or more,
and then move back to the default position.
Pin Description
Short 1-2 Normal (Default)
Short 2-3 Clear BIOS
Table 4-3: Clear BIOS Jumper Settings