Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Packing List
- 3 Connectors
- 3.1 Peripheral Interface Connectors
- 3.2 Internal Peripheral Connectors
- 3.2.1 ATX Power Connector
- 3.2.2 Battery Connectors
- 3.2.3 CPU Power Connector
- 3.2.4 DDR3 DIMM Slots
- 3.2.5 Digital I/O Connector
- 3.2.6 Fan Connector (CPU)
- 3.2.7 Fan Connector (System)
- 3.2.8 Front Panel Audio Connector
- 3.2.9 Front Panel Connector
- 3.2.10 I2C Connector
- 3.2.11 Keyboard/Mouse Connector
- 3.2.12 Parallel Port Connector
- 3.2.13 PCI Slots
- 3.2.14 PCIe x1 Slot
- 3.2.15 PCIe x4 Slot
- 3.2.16 PCIe x16 Slot
- 3.2.17 SATA 3Gb/s Drive Connector
- 3.2.18 SATA 6Gb/s Drive Connector
- 3.2.19 Serial Port Connector, RS-422/485
- 3.2.20 Serial Port Connectors, RS-232
- 3.2.21 SMBus Connector
- 3.2.22 SPDIF Connector
- 3.2.23 SPI ROM Connector
- 3.2.24 TPM Connector
- 3.2.25 USB Connectors
- 3.3 External Peripheral Interface Connector Panel
- 4 Installation
- 5 BIOS
- 5.1 Introduction
- 5.2 Main
- 5.3 Advanced
- 5.4 Chipset
- 5.5 Boot
- 5.6 Security
- 5.7 Exit
- 6 Software Drivers
- A BIOS Options
- B One Key Recovery
- C Terminology
- D Digital I/O Interface
- E Watchdog Timer
- F Hazardous Materials Disclosure
IMBA-Q670 ATX Motherboard
Page 106
Î GbE PXE Boot [Enabled]
Use the GbE PXE Boot option to enable or disable the boot option for GbE devices.
Î
Disabled DEFAULT
Disables the GbE PXE Boot option
Î
Enabled
Enables the GbE PXE Boot option
Î Restore on AC Power Loss [Power Off]
Use the Restore on AC Power Loss BIOS option to specify what state the system
returns to if there is a sudden loss of power to the system.
Î
Power Off
The system remains turned off
Î
Power On DEFAULT
The system turns on
Î
Last State
The system returns to its previous state. If it was on, it
turns itself on. If it was off, it remains off.
Î Resume on PCIe Wake [Enabled]
Use the Resume on PCIe Wake option to enable or disable resuming from the PCIe wake
message and WAKE# signal.
Î
Disabled
Disables Resume on PCIe Wake option
Î
Enabled DEFAULT
Enables Resume on PCIe Wake option
Î Resume on PME/GbE [Enabled]
Use the Resume on PME/GbE option to enable or disable resuming from PCI PME# or
GbE signal.
Î
Disabled
Disables Resume on PCI PME/GbE option
Î
Enabled DEFAULT
Enables Resume on PCI PME/GbE option
Î Resume on Ring [Enabled]
Use the Resume on Ring option to enable or disable resuming from RI# signal.