Owner manual

IMBA-XQ354 Motherboard
Page 81
The COM Port Pin 9 Voltage Setting Select jumpers configure the voltage output provided
by pin 9 on the COM3, COM4, COM5 and COM6 connectors. Pin 9 on COM3, COM4,
COM5 and COM6 can provide 5 V or 12 V of power to an external device. The COM Port
Pin 9 Voltage Setting Select jumper selections options are shown in
9Table 5-4.
COM Port Jumper Pin 9 +5 V Pin 9 +12 V
COM3 J_COM_V3 Short 1-2 Short 2-3
COM4 J_COM_V4 Short 1-2 Short 2-3
COM5 J_COM_V5 Short 1-2 Short 2-3
COM6 J_COM_V6 Short 1-2 Short 2-3
Table 5-4: COM Port Pin 9 Voltage Setting Select Jumper Settings
The COM Port Pin 9 Voltage Setting Select jumper location is shown in 9Figure 5-10
below.
Figure 5-10: COM Port Pin 9 Voltage Setting Select Jumper Location
5.4.4 SPDIF Out Selection
Jumper Label: JP1
Jumper Type:
3-pin header
Jumper Settings:
See 9Table 5-5