User's Manual

IOVU-430M Panel PC
Page 15
3.3.1 12 V~36 V DC Terminal Block
The power terminal block connects to a 12 V~36 V DC power source.
CN Label: 12-36 V
CN Type: Terminal block
CN Location:
See Figure 3-2
CN Pinouts: See Table 3-2 and Figure 3-3
Pin Description
1 12~36 V DC Power in
2 GND
Table 3-2: 12~36 V Power Connector Pinouts
Figure 3-3: Power Terminal Block
3.3.2 GPIO and CAN bus Connector
The IOVU-430M has a GPIO (pins 1-7) and CAN bus connector (pins 8-10). The GPIO
can be used to connect to external devices or peripherals. The CAN bus connector
connects to a Controller-Area Network (CAN). A CAN allows microcontrollers and
devices to communicate with each other without the need of a host computer. The
pinouts are listed below.