User's Manual

IOVU-430M Panel PC
Page 17
Figure 3-5: Serial Device Connector
Step 2: Secure the connector. Secure the serial device connector to the external
interface by tightening the two retention screws on either side of the connector. Step 0:
3.3.3.2 RS-232/422/485 Selection
To select RS-232/422/485 mode, please follow the directions below.
Step 1: Find and start the IEI CE_UTILITY. Select the Windows CE Start menu, next
select Programs, then select IEI, and finally select IEI_CEUTILITY (Start ->
Programs -> IEI -> IEI CEUTILITY) to launch the utility.
Figure 3-6: COM1 mode setting