IOVU-570M Panel PC IEI Technology Corp. MODEL: IOVU-570M Panel PC, 5.7" Touch Screen, 520 MHz Marvell XScale PXA270, Fast Ethernet, 2 x USB, 802.11b/g Wireless, RS-232/422/485 RoHS Compliant, IP 64 Protection User Manual Page i Rev. 1.
IOVU-570M Panel PC Revision Date Version Changes 17 September, 2010 1.
IOVU-570M Panel PC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
IOVU-570M Panel PC Table of Contents 1 INTRODUCTION.......................................................................................................... 1 1.1 OVERVIEW.................................................................................................................. 2 1.2 BENEFITS ................................................................................................................... 2 1.3 FEATURES ..............................................................................
IOVU-570M Panel PC 4.5 SOFTWARE ................................................................................................................ 25 4.5.1 Wireless AP ...................................................................................................... 26 A CERTIFICATIONS .................................................................................................... 29 A.1 ROHS COMPLIANT ..................................................................................................
IOVU-570M Panel PC List of Figures Figure 1-1: IOVU-570M ..............................................................................................................2 Figure 2-1: Front Panel .............................................................................................................6 Figure 2-2: IOVU-570M Peripheral Connectors ........................................................................6 Figure 2-3: IOVU-570M Physical Dimensions (millimeters) .................................
IOVU-570M Panel PC List of Tables Table 1-1: Technical Specifications..........................................................................................4 Table 3-1: Package List Contents ........................................................................................... 12 Table 4-1: External Interface Connectors............................................................................... 15 Table 4-2: 12~36 V Power Connector Pinouts.........................................................
IOVU-570M Panel PC Chapter 1 1 Introduction Page 1
IOVU-570M Panel PC 1.1 Overview Figure 1-1: IOVU-570M The IOVU-570M Panel PC comes with a 5.7" touch panel screen. It is powered by the 520 MHz Marvell XScale PXA270 processor and has 128 MB of SDRAM. The IOVU-570M includes an SD card with Windows CE 5.0 installed. The package also includes a software development kit and documentation to help easily customize the operating system according to needs. The IOVU-570M is an extremely low power Panel PC.
IOVU-570M Panel PC 1.3 Features The IOVU-570M features are listed below: 520 MHz Marvell XScale PXA270 processor 128 MB of SDRAM Two Ethernet ports Two USB ports One RS-232/422/485 serial communication connection Two built-in speakers 4-wire resistive touch panel 12-36 VDC input RoHS compliant 1.4 Technical Specifications The IOVU-570M technical specifications are listed in Table 1-1.
IOVU-570M Panel PC Specifications I/O and Communications Ethernet 2 x 10/100 Mb/s Serial Ports 1 x RS-232/422/485 USB Interfaces 2 x USB host connectors Audio 2 x 1.5 Watt speakers Power Power Supply 12-36 VDC Power Consumption 8.5 W Environmental and Mechanical Operating Temperature Minimum: -20ºC (-4°F) Maximum: 60°C (140°F) 5%RH to 90%RH (non-condensing) Humidity Operating Random Vibration Mode (MIL-STD-810F 514.5C-3) Vibration 1.Axes: 3 axs (Vertical / Transverse / Longitudinal). 2.
IOVU-570M Panel PC Chapter 2 2 Detailed Specifications Page 5
IOVU-570M Panel PC 2.1 Front Panel The IOVU-570M front panel (Figure 2-1) comprises a 5.7" TFT WVGA 16-bit color touch screen LCD in an ABS+PC plastic frame. Figure 2-1: Front Panel 2.2 Connector Panel All external peripheral interface connectors are located on the bottom panel of the IOVU-570M . The peripheral interface connectors are shown in Figure 2-2.
IOVU-570M Panel PC External peripheral interface connectors on the IOVU-570M include: 1 x DC-IN bare wire terminal block 2 x RJ-45 LAN connectors 1 x RS-232/422/485 connector 2 x USB connectors Page 7
IOVU-570M Panel PC 2.3 Dimensions The physical dimensions of the IOVU-570M are shown in Figure 2-3 and listed below: Width: 180 mm Height: 135.8 mm Depth: 46.
IOVU-570M Panel PC 2.4 Power Supply WARNING: Whenever you need to remove a part for maintenance or upgrading, switch off the power supply and unplug the power cord first. And Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions The IOVU-570M has a terminal block connector on the bottom panel.
IOVU-570M Panel PC Chapter 3 3 Unpacking Page 10
IOVU-570M Panel PC 3.1 Anti-static Precautions WARNING: Failure to take ESD precautions during installation may result in permanent damage to the IOVU-570M and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IOVU-570M. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the IOVU-570M or any other electrical component is handled, the following anti-static precautions are strictly adhered to.
IOVU-570M Panel PC 3.3 Unpacking Checklist NOTE: If some of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the IOVU-570M from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@iei.com.tw.
IOVU-570M Panel PC Chapter 4 4 Installation Page 13
IOVU-570M Panel PC 4.1 Installation Precautions During installation, be aware of the precautions below: Read the user manual: The user manual provides a complete description of the IOVU-570M, installation instructions and configuration options. DANGER! Disconnect Power: Power to the IOVU-570M must be disconnected during the installation process, or before any attempt is made to access the rear panel.
IOVU-570M Panel PC Figure 4-1: SD Card Installation 4.3 External Peripheral Interface Connectors Table 4-1 lists the external interface connectors on the IOVU-570M. Detailed descriptions of the connectors can be found following the table.
IOVU-570M Panel PC 4.3.1 12 V~36 V DC Terminal Block The power terminal block connects to a 12 V~36 V DC power source. CN Label: 12-36 V CN Type: Terminal block CN Location: See Figure 4-2 CN Pinouts: See Table 4-2 and Figure 4-3 Pin Description 1 12~36 V DC Power in 2 GND Table 4-2: 12~36 V Power Connector Pinouts Figure 4-3: Power Terminal Block 4.3.2 RS-232/422/485 Serial Port This section outlines the usage and setup of the serial port on the rear I/O panel. 4.3.2.
IOVU-570M Panel PC Figure 4-4: Serial Device Connector Step 2: Secure the connector. Secure the serial device connector to the external interface by tightening the two retention screws on either side of the connector. Step 0: 4.3.2.2 RS-232/422/485 Selection To select RS-232, RS-422, or RS-485 mode, please follow the directions below. Step 1: Select "Start > Programs > IEI > IEI CEUTILITY.exe" to run IEI_CEUTILITY.exe in the “SYSTEM” folder on the SD/CF card).
IOVU-570M Panel PC Figure 4-5: Serial Port Mode Setting Step 2: Change serial port mode setting. Change the value in Figure 4-5 to the desired mode setting. Step 3: Click "Set" Step 4: Click "Save Registry" to save the changes. Step 0: 4.3.2.3 Pinouts Serial port pinouts are shown below.
IOVU-570M Panel PC Pin RS-232 6 DSR 7 RTS 8 CTS 9 RI RS-422 RS-485 TXD+ Table 4-3: Serial Port Pinouts Figure 4–6: Serial Port Pinouts 4.3.3 USB Connectors The external USB Series "A" receptacle connectors provide easier and quicker access to external USB devices. Follow the steps below to connect USB devices to the IOVU-570M. Step 1: Insert a USB Series "A" plug. Insert the USB Series "A" plug of a device into the USB Series "A" receptacle on the external peripheral interface.
IOVU-570M Panel PC Figure 4-7: USB Connector USB devices connect directly to the USB connectors on the external peripheral connector panel. Pin Description Pin Description 1 VCC 5 VCC 2 D1- 6 D2- 3 D1+ 7 D2+ 4 GND 8 GND Table 4-4: USB Connector Pinouts 4.3.4 Ethernet Connector There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection to an external network. To connect a LAN cable with an RJ-45 connector, please follow the instructions below.
IOVU-570M Panel PC Figure 4-8: LAN Connection Step 2: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cable RJ-45 connector into the on-board RJ-45 connector. Step 0: The Ethernet connector pinouts are shown below.
IOVU-570M Panel PC Figure 4-9: Ethernet Connector The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green LED indicates activity on the port and the yellow LED indicates the port is linked (Table 4-6). SPEED LED LINK LED Status Description Status Description GREEN ON: 100 MB YELLOW ON: Linked OFF: 10 MB Flashing: Activity Table 4-6: Ethernet Connector LEDs 4.
IOVU-570M Panel PC Step 1: Select the location on the wall for the wall-mounting bracket. Step 2: Carefully mark the locations of the four screw holes in the bracket on the wall. Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention screws. Step 4: Align the wall-mounting bracket screw holes with the pilot holes. Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into the four pilot holes and tightening them (Figure 4-10).
IOVU-570M Panel PC NOTE: In the diagram below the bracket is already installed on the wall. Figure 4-11: Chassis Support Screws Step 9: Secure the panel PC by fastening the retention screw of the wall-mounting bracket. (Figure 4-12).
IOVU-570M Panel PC Figure 4-12: Secure the IOVU-570M 4.5 Software The IOVU-570M comes with a pre-installed Windows CE 5.0 or Linux 2.6.x operating system and a rich software application development kit. For information about configuring the operating system, adding remote management tools or additional software and drivers, refer to the user manuals on IEI IOVU Utility CD that came with the IOVU-570M. The IOVU includes the following software: Standard Windows® CE5.0 professional version license.
IOVU-570M Panel PC Free remote management tools installed in laptop for remotely configuring, monitoring, and managing your IOVU-570M. 4.5.1 Wireless AP To select Wireless AP, please follow the instructions below. Step 1: When turn on the power, Wireless AP start to search wireless base stations around as shown below. (Figure 4-13). Figure 4-13: Wireless AP Step 2: Select your Internet connection and click Connect. Step 3: The Wireless Network Properties screen appears next. (Figure 4-14).
IOVU-570M Panel PC Figure 4-14: Wireless Network Properties Step 4: You must input the password into the Network key. Click OK. The soft AP configuration is finished. (Figure 4-15).
IOVU-570M Panel PC Step 5: Click the IP Information button to view the information of the Wireless AP Solo.If the server function is enabled on the AP. You can automatically get the IP address, subnet mask. (Figure 4-16).
IOVU-570M Panel PC Appendix A A Certifications Page 29
IOVU-570M Panel PC A.1 RoHS Compliant All models in the IOVU series comply with the Restriction of Hazardous Materials (RoHS) Directive. This means that all components used to build the industrial workstations and the workstation itself are RoHS compliant.
IOVU-570M Panel PC Appendix B B Safety Precautions Page 31
IOVU-570M Panel PC B.1 Safety Precautions WARNING: The precautions outlined in this appendix should be strictly followed. Failure to follow these precautions may result in permanent damage to the IOVU-570M. Please follow the safety precautions outlined in the sections that follow: B.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times.
IOVU-570M Panel PC B.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the IOVU-570M may result in permanent damage to the IOVU-570M and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the IOVU-570M. Dry climates are especially susceptible to ESD.
IOVU-570M Panel PC The interior of the IOVU-570M does not require cleaning. Keep fluids away from the IOVU-570M interior. Be cautious of all small removable components when vacuuming the IOVU-570M. Turn the IOVU-570M off before cleaning the IOVU-570M. Never drop any objects or liquids through the openings of the IOVU-570M. Be cautious of any possible allergic reactions to solvents or chemicals used when cleaning the IOVU-570M.
IOVU-570M Panel PC B.3 FCC Precautions WARNING: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IOVU-570M Panel PC Appendix C C Hazardous Materials Disclosure Page 36
IOVU-570M Panel PC C.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
IOVU-570M Panel PC Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl (CR(VI)) (PBB) Ethers (PBDE) Housing X O O O O X Display X O O O O X Printed Circuit X O O O O X X O O O O O X O O O O X Fan Assembly X O O O O X Power Supply X O O O O X O O O O O O Board Metal Fasteners Cable Assembly Assemblies Battery O: This toxic or hazardou
IOVU-570M Panel PC 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯 (Pb) (Hg) (Cd) (CR(VI)) (PBB) 醚 (PBDE) 壳体 X O O O O X 显示 X O O O O X 印刷电路板 X O O O O X 金属螺帽 X O O O O O 电缆组装 X O O O O X 风扇组装 X O O O O X 电力供应组装 X O O O O X 电池 O O O O O O O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X
