User Manual
Table Of Contents
- 1 Introduction
- 2 Unpacking
- 3 Connectors
- 3.1 Peripheral Interface Connectors
- 3.2 Internal Peripheral Connectors
- 3.2.1 ATX Power Enable Connector
- 3.2.2 Audio Connector (10-pin)
- 3.2.3 Backlight Inverter Connector
- 3.2.4 Battery Connector
- 3.2.5 CompactFlash® Socket
- 3.2.6 Digital Input/Output (DIO) Connector
- 3.2.7 Fan Connector (+5V)
- 3.2.8 Floppy Disk Connector
- 3.2.9 Front Panel Connector (8-pin)
- 3.2.10 IDE Connector (40-pin)
- 3.2.11 Infrared Interface Connector (5-pin)
- 3.2.12 Keyboard/Mouse Connector
- 3.2.13 Parallel Port Connector
- 3.2.14 Power Connector
- 3.2.15 SATA Drive Connectors (Optional)
- 3.2.16 Serial Port Connector (RS-232/422/485)
- 3.2.17 TTL Connector
- 3.2.18 Internal USB Connectors
- 3.2.19 -VCC Power Connector
- 3.3 External Peripheral Interface Connectors
- 4 Installation
- 5 BIOS Screens
- A BIOS Menu Options
- B One Key Recovery
- C Terminology
- D Watchdog Timer
- E Hazardous Materials Disclosure
IOWA-LX-600 Half-size CPU Card
Page 94
Fast Spe ed
Set the Memory S peed to Fast Speed
Decode Memory Address x [Varyi ng defaults]
Use the Decode Memory Address option to manually enter the memory address that
should be used by this memory space. The defaults for the different memory spaces are
shown below
Memory S pace 0: 0D0
Memory S pace 1: 000
Memory S pace 2: 000
Memory S pace 3: 000
Decode Memory Size x [Varying defaults]
Use the Decode Memory Size option to manually enter the size of the memory space.
The defaults for the different memory spaces are sho wn below
Memory S pace 0: 64 KB
Memory S pace 1: 16 KB
Memory S pace 2: 16 KB
Memory S pace 3: 16 KB
5.6 Power Management Setup
Use the Power Management Setup menu (6BIOS Menu 10) to set the BIOS power
management and saving features.