User Manual
Table Of Contents
- 1 Introduction
- 2 Unpacking
- 3 Connectors
- 3.1 Peripheral Interface Connectors
- 3.2 Internal Peripheral Connectors
- 3.2.1 ATX Power Enable Connector
- 3.2.2 Audio Connector (10-pin)
- 3.2.3 Backlight Inverter Connector
- 3.2.4 Battery Connector
- 3.2.5 CompactFlash® Socket
- 3.2.6 Digital Input/Output (DIO) Connector
- 3.2.7 Fan Connector (+5V)
- 3.2.8 Floppy Disk Connector
- 3.2.9 Front Panel Connector (8-pin)
- 3.2.10 IDE Connector (40-pin)
- 3.2.11 Infrared Interface Connector (5-pin)
- 3.2.12 Keyboard/Mouse Connector
- 3.2.13 Parallel Port Connector
- 3.2.14 Power Connector
- 3.2.15 SATA Drive Connectors (Optional)
- 3.2.16 Serial Port Connector (RS-232/422/485)
- 3.2.17 TTL Connector
- 3.2.18 Internal USB Connectors
- 3.2.19 -VCC Power Connector
- 3.3 External Peripheral Interface Connectors
- 4 Installation
- 5 BIOS Screens
- A BIOS Menu Options
- B One Key Recovery
- C Terminology
- D Watchdog Timer
- E Hazardous Materials Disclosure
IOWA-LX-600 Half-size CPU Card
Page 2
1.1 Introduction
Figure 1-1: IOWA-LX-600
The IOWA-LX-600 is an AMD Geode™ LX based based half-size ISA CPU card. The
IOWA-LX-600 has a Front Side Bus (FSB) of 366 MHz, 128 MB of RAM on-board and is
upgradeable with a further 512 MB of SDRAM.
Multiple input/output options include VGA and 24-bit TTL for video output, a parallel port,
two serial ports, an infrared port and 10/100BASE-T Ethernet. The IOW A -LX-600 support s
up to two IDE drives and one floppy drive. Two SATA ports with RAID 0 and RAID 1
capabilities are optional.
1.2 Model Variations
The IOWA-LX-600 series has two models:
IOWA-LX-600-R10
IOWA-LX-600S-R10
The specifications for the two models are show in
5Table 1-1