User Manual
Table Of Contents
- 1 Introduction
- 2 Unpacking
- 3 Connectors
- 3.1 Peripheral Interface Connectors
- 3.2 Internal Peripheral Connectors
- 3.2.1 ATX Power Enable Connector
- 3.2.2 Audio Connector (10-pin)
- 3.2.3 Backlight Inverter Connector
- 3.2.4 Battery Connector
- 3.2.5 CompactFlash® Socket
- 3.2.6 Digital Input/Output (DIO) Connector
- 3.2.7 Fan Connector (+5V)
- 3.2.8 Floppy Disk Connector
- 3.2.9 Front Panel Connector (8-pin)
- 3.2.10 IDE Connector (40-pin)
- 3.2.11 Infrared Interface Connector (5-pin)
- 3.2.12 Keyboard/Mouse Connector
- 3.2.13 Parallel Port Connector
- 3.2.14 Power Connector
- 3.2.15 SATA Drive Connectors (Optional)
- 3.2.16 Serial Port Connector (RS-232/422/485)
- 3.2.17 TTL Connector
- 3.2.18 Internal USB Connectors
- 3.2.19 -VCC Power Connector
- 3.3 External Peripheral Interface Connectors
- 4 Installation
- 5 BIOS Screens
- A BIOS Menu Options
- B One Key Recovery
- C Terminology
- D Watchdog Timer
- E Hazardous Materials Disclosure
IOWA-LX-600 Half-size CPU Card
Page 43
4.2 Installation Considerations
NOTE:
The following installation notices and installation considerations should
be read and understood before the IOWA-LX-600 is installed. All
installation notices pertaining to the installation of the IOWA-LX-600
should be strictly adhered to. Failing to adhere to these precautions
may lead to severe damage of the IOWA-LX-600 and injury to the
person installing the motherboard.
4.2.1 Installation Notices
WARNING:
The installation instructions described in this manual should be carefully
followed in order to prevent damage to the IOWA-LX-600, IOWA-LX-600
components and injury to the user.
Before and during the inst allation please DO the following:
Read the user manual:
o The user manual provides a complete description of the IOWA-LX-600
installation instructions and configuratio n options.
Wear an ele c trostatic discharge cuff (ESD):
o Electronic components are easily damag ed by ESD. Wearing an ES D cuff
removes ESD from the body and helps prevent ESD damage.
Place the IOWA-LX-600 on an antistatic pad:
o When installing or configuring the motherboard, place it on an antistatic
pad. This helps to prevent potential ESD damage.
Turn all power to the IOWA-LX-600 off: