Owner's manual

KINO-945GSE Motherboard
Page 73
AT Power Select Description
1-2 Keep CMOS Setup Default
2-3 Clear CMOS Setup
Table 5-3: Clear CMOS Jumper Settings
The location of the clear CMOS jumper is shown in 7Figure 5-4 below.
Figure 5-4: Clear CMOS Jumper
5.6.3 CF Card Setup
Jumper Label: J_CF1
Jumper Type:
2-pin header
Jumper Settings:
See
Table 5-4
Jumper Location:
See
Figure 5-5
The CF Card Setup jumper sets the CF Type I card or CF Type II cards as either the slave
device or the master device. CF Card Setup jumper settings are shown in
Table 5-4.
CF Card Setup Description
Open Slave Default
Closed Master
Table 5-4: CF Card Setup Jumper Settings
The CF Card Setup jumper location is shown in Figure 5-5.