Owner's manual

KINO-945GSE Motherboard
Page 76
Figure 5-7: LCD Panel Type Selection Jumper Pinout Locations
5.6.6 LVDS Voltage Selection
WARNING:
Permanent damage to the screen and KINO-945GSE may occur if the
wrong voltage is selected with this jumper. Please refer to the user
guide that cam with the monitor to select the correct voltage.
Jumper Label: J_VLVDS1
Jumper Type:
3-pin header
Jumper Settings:
See
Table 5-7
Jumper Location:
See
Figure 5-8
The LVDS Voltage Selection jumper allows the LVDS screen voltage to be set. The
LVDS Voltage Selection jumper settings are shown in
Table 5-7.
LCD Voltage Select Description
1-2 3.3 V