User Manual

KINO-PV-D5252/D4252 Mini ITX SBC
Page 54
Clear CMOS Description
Short 1 - 2 Keep CMOS Setup Default
Short 2 - 3 Clear CMOS Setup
Table 4-3: Clear CMOS Jumper Settings
The location of the clear CMOS jumper is shown in 833HFigure 4-5 below.
Figure 4-5: Clear CMOS Jumper
4.6.3 CompactFlash® Card Setup Jumper
Jumper Label: JCF1
Jumper Type:
2-pin header
Jumper Settings:
See Table 4-4
Jumper Location:
See Figure 4-6
The CompactFlash® slot is connected through an IDE connection. This jumper sets the
CompactFlash® card as the master or slave IDE device.
Setting Description
Open Slave
Closed Master
Table 4-4: CompactFlash® Setup Jumper Settings