Instruction Manual

NANO-945GSE2
Page 15
Serial port connector (RS-232/422/485)
14-pin header COM3
TTL LCD interface connector
40-pin crimp CN3
USB 2.0 connector
8-pin header USB2
USB 2.0 connector
8-pin header USB3
Table 3-1: Peripheral Interface Connectors
3.2.1 External Interface Panel Connectors
6Table 3-2 lists the rear panel connectors on the NANO-945GSE2. Detailed descriptions of
these connectors can be found in Section
3.4 on page 637.
Connector Type Label
Ethernet connector RJ-45 LAN1
Ethernet connector RJ-45 LAN2
Keyboard/mouse PS/2 KB_MS1
RS-232 serial port connector Male DB-9 COM1
Dual USB port USB port USB1
VGA port connector 15-pin female VGA1
Table 3-2: Rear Panel Connectors
3.3 Internal Peripheral Connectors
Internal peripheral connectors are found on the motherboard and are only accessible
when the motherboard is outside of the chassis. This section has complete descriptions of
all the internal, peripheral connectors on the NANO-945GSE2.
3.3.1 PS ON and +5V Standby Power Connector
CN Label: J5
CN Type:
3-pin wafer (1x3)
CN Location:
See
Figure 3-3
CN Pinouts:
See
Table 3-3