Instruction Manual

NANO-945GSE2
Page 31
PIN Description PIN Description PIN Description PIN Description
A11 AEN A27 SA4 B11 -SMEMW B27 TC
A12 SA19 A28 SA3 B12 -SMEMR B28 BALE
A13 SA18 A29 SA2 B13 -IOW B29 VCC
A14 SA17 A30 SA1 B14 -IOR B30 ISAOSC
A15 SA16 A31 SA0 B15 -DACK3 B31 GND
A16 SA15 A32 GND B16 DRQ3 B32 GND
Table 3-16: PC/104 Connector Pinouts (1 of 2)
PIN Description PIN Description PIN Description PIN Description
C1 GND C11 -MEMW D1 GND D11 -DACK5
C2 -SBHE C12 SD8 D2 -MEMCS16 D12 DRQ5
C3 SA23 C13 SD9 D3 -IOCS16 D13 -DACK6
C4 SA22 C14 SD10 D4 IRQ10 D14 DRQ6
C5 SA21 C15 SD11 D5 IRQ11 D15 -DACK7
C6 SA20 C16 SD12 D6 IRQ12 D16 DRQ7
C7 SA19 C17 SD13 D7 IRQ15 D17 VCC
C8 SA18 C18 SD14 D8 IRQ14 D18 -MASTER
C9 SA17 C19 SD15 D9 -DACK0 D19 GND
C10 -MEMR C20 NC D10 DRQ0 D20 GND
Table 3-17: PC/104 Connector Pinouts (2 of 2)
3.3.15 SATA Drive Connectors
CN Label:
SATA1, SATA2
CN Type:
7-pin SATA drive connectors
CN Location:
See
6Figure 3-17
CN Pinouts:
See
6Table 3-18
The four SATA drive connectors are each connected to a first generation SATA drive. First
generation SATA drives transfer data at speeds as high as 150Mb/s. The SATA drives can
be configured in a RAID configuration.