Instruction Manual

NANO-945GSE2
Page 47
Step 5: Secure the SO-DIMM. Release the arms on the SO-DIMM socket. They clip into
place and secure the SO-DIMM in the socket.Step 0:
4.4 CF Card Installation
NOTE:
The NANO-945GSE2 can support both CF Type I and II cards.
To install a CF card onto the NANO-945GSE2, please follow the steps below:
Step 1: Locate the CF card socket. Place the NANO-945GSE2 on an anti-static pad
with the solder side facing up. Locate the CF card socket.
Step 2: Align the CF card. Make sure the CF card is properly aligned with the CF
socket.
Step 3: Insert the CF card. Gently insert the CF card into the socket making sure the
socket pins are properly inserted into the socket. See
Figure 4-2. Step 0:
Figure 4-2: CF Card Installation