Instruction Manual

NANO-945GSE2
Page 53
Figure 4-6:LVDS Panel Resolution Jumper Pinout Locations
4.5.5 LVDS Voltage Selection
WARNING:
Permanent damage to the screen and NANO-945GSE2 may occur if
the wrong voltage is selected with this jumper. Please refer to the user
guide that cam with the monitor to select the correct voltage.
Jumper Label: JP3
Jumper Type:
3-pin header
Jumper Settings:
See
Table 4-6
Jumper Location:
See
Figure 4-7
The LVDS Voltage Selection jumpers allow the LVDS screen voltages to be set.
J_VLVDS1 sets the voltage connected to LVDS1. The LVDS Voltage Selection jumper
settings are shown in
Table 4-6.
LCD Voltage Select Description
Short 1-2 +3.3V LVDS
Short 2-3 +5V LVDS Default
Table 4-6: LVDS Voltage Selection Jumper Settings