Instruction Manual

NANO-CV-D25502/N26002 EPIC SBC
Page 44
WARNING:
The diagram below is merely for illustration. The configuration and
connection of the cables from the TFT LCD screen being installed may
be different. Please refer to the installation manual that came with the
TFT LCD screen.
Figure 4-9: LVDS Connector
Step 3: Locate the backlight inverter connector. The location of the backlight inverter
connector is shown in Chapter 3.
Step 4: Connect backlight connector. Connect the backlight connector to the driver
TFT LCD PCB as shown in
Figure 4-10. When inserting the cable connector,
make sure the pins are properly aligned.