Manual

NANO-HM650 EPIC SBC
Page 52
Jumper Location:
See Figure 4-10
The LCD voltage select jumper sets the voltage of the power supplied to the LCD panel.
Setting Description
1-2 +3.3 V (Default)
3-4 +5 V
5-6 +12 V
Table 4-6: LVDS Voltage Select Jumper Settings
Figure 4-11: LVDS Voltage Select Jumper Locations
4.4.6 ME RTC Register Jumper
Jumper Label: ME_RTC1
Jumper Type:
3-pin header
Jumper Settings: See Table 4-7
Jumper Location: See Figure 4-11
The ME RTC Register jumper protects or clears the ME RTC registers. The ME RTC
Register jumper settings are shown in Table 4-4.
Setting Description
Short 1-2 No OverWrite Default