Owner manual

NANO-LX EPIC SBC
 30 Min
 45 Min
 60 Min
 90 Min
 120 Min
 x Suspend Mode [Disabled]
The Suspend Mode option can only be selected if the Power Management option is set
to Legacy. The Suspend Mode specifies the amount of time the system can be inactive
before the system enters suspend mode. The Suspend Mode options are:
 Disabled (Default)
 1 Sec
 5 Sec
 10 Sec
 15 Sec
 30 Sec
 45 Sec
 1 Min
 5 Min
 10 Min
 15 Min
 30 Min
 45 Min
 60 Min
 90 Min
 120 Min
 Soft-Off by PWR-BTTN [Instant-Off]
Use the Soft-Off by PWR-BTTN option to enabled the system to enter a very
low-power-usage state when the power button is pressed.

Instant-Off
(Default) When the power button is pressed, the system is
immediately shutdown.
Page 147