Manual

NANO-PV-D4252/N4552/D5252 EPIC SBC
Page 52
4.5.8 CompactFlash® Voltage Selection
WARNING:
Incorrect voltages can destroy the CF card. Make sure to select a
voltage that matches the voltage required by the CF card.
Jumper Label: J_VCF1
Jumper Type:
2-pin header
Jumper Settings:
See Table 4-10
Jumper Loc
ation:
See Figure 4-9
The Compa
ctFlash® voltage selection jumper sets the voltage of the power supplied to
the CF card.
Setting Description
Short 1-2 +5 V
Short 2-3 +3.3 V
Table 4-10: CompactFlash® Voltage Selection Jumper Settings
Figure 4-9: CompactFlash® Voltage Selection Jumper Location
4.5.9 LVDS1 Screen Resolution Selection
Jumper Label: J_LCD_TYPE
Jumper Type:
8-pin header
Jumper Settings:
See Table 4-11
Jumper Loc
ation:
See Figure 4-10