Manual

NANO-PV-D4252/N4552/D5252 EPIC SBC
Page 62
Figure 4-18: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the on-board RJ-45 connector. Step 0:
4.8.2 PS/2 Y-Cable Connection
The NANO-PV-D4252/N4552/D5252 has a PS/2 connector on the external peripheral
interface panel. The dual PS/2 connector is connected to the PS/2 Y-cable that came with
the NANO-PV-D4252/N4552/D5252. One of the PS/2 cables is connected to a keyboard
and the other to a mouse to the system. Follow the steps below to connect a keyboard and
mouse to the NANO-PV-D4252/N4552/D5252.
Step 1: Locate the dual PS/2 connector. The location of the PS/2 connector is shown
in Chapter 3.
Step 2: Insert the keyboard/mouse connector. Insert the PS/2 connector on the end
of the PS/2 y-cable into the external PS/2 connector. See Figure 4-19.