Owner's manual

NANO-QM57A EPIC SBC
Page 116
C.4.1 Factory Restore
To restore the factory default image, please follow the steps below.
Step 1: Type <1> and press <Enter> in the main menu.
Step 2: The Symantec Ghost window appears and starts to restore the factory default. A
factory default image called iei.GHO is created in the hidden Recovery partition.
Figure C-24: Restore Factory Default
Step 3: The screen is shown as in
Figure A-8 when completed. Press any key to reboot
the system. Step 0:
Figure C-25: Recovery Complete Window