Manual

NANO-QM871 EPIC SBC
Page 64
Figure 4-14: Backlight Inverter Connection
4.8.4 SATA Drive Connection
The NANO-QM871 is shipped with two SATA drive cables. To connect the SATA drive to
the connector, please follow the steps below.
Step 1: Locate the SATA connector and the SATA power connector. The locations of
the connectors are shown in Chapter 3.
Step 2: Insert the cable connector. Insert the cable connector into the on-board SATA
drive connector and the SATA power connector. See
Figure 4-15.