NOVA-HM551 5.25" SBC )zNOVA-HM551 CPU Card IEI Technology Corp. MODEL: NOVA-HM551 5.25” Motherboard Supports Socket G1 Intel® Core™ i3/i5/i7 CPU, VGA/HDMI/LVDS Dual Display, Dual GbE, Eight USB 2.0, Four SATA 3Gb/s, Two PCIe mini, PCIe x16, PCI-104, RoHS User Manual Page I Rev. 1.
NOVA-HM551 5.25" SBC Revision Date Version Changes 30 August, 2011 1.10 Updated for R11 version 8 February, 2011 1.
NOVA-HM551 5.25" SBC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
NOVA-HM551 5.25" SBC Table of Contents 1 INTRODUCTION........................................................................................................... 1 1.1 INTRODUCTION........................................................................................................... 2 1.2 CONNECTORS ............................................................................................................. 3 1.3 DIMENSIONS ................................................................................
NOVA-HM551 5.25" SBC 3.2.13 PCI Express x16 Slot...................................................................................... 31 3.2.14 Power Connector (+12V) .............................................................................. 33 3.2.15 Power Button ................................................................................................. 34 3.2.16 SATA Drive Connectors ................................................................................. 34 3.2.
NOVA-HM551 5.25" SBC 4.7 INTERNAL PERIPHERAL DEVICE CONNECTIONS ........................................................ 62 4.7.1 Audio Kit Installation....................................................................................... 62 4.7.2 Keyboard/Mouse Connector ............................................................................ 63 4.7.3 PCIe Mini Card Installation ............................................................................ 65 4.7.4 SATA Drive Connection ................
NOVA-HM551 5.25" SBC 5.5 BOOT...................................................................................................................... 102 5.6 SECURITY ............................................................................................................... 103 5.7 EXIT ....................................................................................................................... 104 A BIOS MENU OPTIONS ..............................................................................
NOVA-HM551 5.25" SBC List of Figures Figure 1-1: NOVA-HM551 ...............................................................................................................2 Figure 1-2: Connectors ..................................................................................................................3 Figure 1-3: NOVA-HM551 Dimensions (mm)................................................................................4 Figure 1-4: NOVA-HM551 EPIC Dimensions (mm) ...................................
NOVA-HM551 5.25" SBC Figure 4-1: Make sure the CPU socket retention screw is unlocked ......................................50 Figure 4-2: Lock the CPU Socket Retention Screw...................................................................51 Figure 4-3: Cooling Kit Support Bracket ....................................................................................52 Figure 4-4: SO-DIMM Installation ................................................................................................
NOVA-HM551 5.25" SBC Figure B-13: Symantec Ghost Path ......................................................................................... 121 Figure B-14: Select a Local Source Drive ............................................................................... 122 Figure B-15: Select a Source Partition from Basic Drive ...................................................... 122 Figure B-16: File Name to Copy Image to ...............................................................................
NOVA-HM551 5.25" SBC List of Tables Table 1-1: Technical Specifications..............................................................................................8 Table 3-1: Peripheral Interface Connectors ...............................................................................17 Table 3-2: Rear Panel Connectors ..............................................................................................17 Table 3-3: Audio Connector Pinouts ......................................................
NOVA-HM551 5.25" SBC Table 4-3: Clear CMOS Jumper Settings....................................................................................56 Table 4-4: COM 5 Function Select Jumper Settings .................................................................57 Table 4-5: COM 6 Function Select Jumper Settings .................................................................58 Table 4-6: LVDS Voltage Selection Jumper Settings................................................................
NOVA-HM551 5.25" SBC List of BIOS Menus BIOS Menu 1: Main .......................................................................................................................76 BIOS Menu 2: Advanced ..............................................................................................................77 BIOS Menu 3: ACPI Configuration ..............................................................................................78 BIOS Menu 4: TPM Configuration ....................................
NOVA-HM551 5.
NOVA-HM551 5.25" SBC 1.1 Introduction Figure 1-1: NOVA-HM551 The NOVA-HM551 5.25” motherboard is a Socket G1 32nm Intel® Core™ i3, i5 and i7 processor platform. Up to two 4.0 GB 800 MHz or 1066 MHz DDR3 SDRAM SO-DIMMs are supported by the NOVA-HM551. The integrated Intel® HM55 Express Chipset supports two GbE LAN port through the dual Realtek RTL8111E Ethernet controllers (with ASF 2.0 support). The NOVA-HM551 also supports four SATA 3Gb/s drives and provides 5 V SATA power.
NOVA-HM551 5.25" SBC 1.2 Connectors The connectors on the NOVA-HM551 are shown in the figure below.
NOVA-HM551 5.25" SBC 1.3 Dimensions The dimensions of the board are listed below: Length: 203.20 mm Width: 146.
NOVA-HM551 5.
NOVA-HM551 5.25" SBC 1.4 Data Flow Figure 1-5 shows the data flow between the two on-board chipsets and other components 5 installed on the motherboard and described in the following sections of this chapter.
NOVA-HM551 5.25" SBC 1.5 Technical Specifications NOVA-HM551 technical specifications are listed in table below. Specification NOVA-HM551 Form Factor 5.
NOVA-HM551 5.25" SBC Specification NOVA-HM551 Display Ports One internal VGA port (10-pin box header) Two HDMI port (up to 1080p) One internal 18/24-bit dual-channel LVDS connector Ethernet Two RJ-45 GbE ports Serial Ports Four RS-232 via one 40-pin header Two RS-232/422/485 via two 14–pin headers USB 2.0/1.
NOVA-HM551 5.
NOVA-HM551 5.25" SBC 2.1 Anti-static Precautions WARNING! Static electricity can destroy certain electronics. Make sure to follow the ESD precautions to prevent damage to the product, and injury to the user. Make sure to adhere to the following guidelines: Wear an anti-static wristband: Wearing an anti-static wristband can prevent electrostatic discharge. Self-grounding: Touch a grounded conductor every few minutes to discharge any excess static buildup.
NOVA-HM551 5.25" SBC 2.3 Packing List NOTE: If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the NOVA-HM551 was purchased from or contact an IEI sales representative directly by sending an email to sales@iei.com.tw.
NOVA-HM551 5.25" SBC 1 VGA cable (P/N: 32000-033800-RS) 1 Mini jumper pack (2.0mm) (P/N: 33100-000033-RS) 1 Utility CD 1 Quick Installation Guide 2.3.
NOVA-HM551 5.
NOVA-HM551 5.
NOVA-HM551 5.25" SBC 3.1 Peripheral Interface Connectors This chapter details all the jumpers and connectors. 3.1.1 NOVA-HM551 Layout The figures below show all the connectors and jumpers.
NOVA-HM551 5.25" SBC 3.1.2 Peripheral Interface Connectors The table below lists all the connectors on the board.
NOVA-HM551 5.
NOVA-HM551 5.25" SBC 3.2 Internal Peripheral Connectors The section describes all of the connectors on the NOVA-HM551. 3.2.1 Audio Connector CN Label: AUDIO1 CN Type: 10-pin header (2x5) CN Location: See Figure 3-2 CN Pinouts: See Table 3-3 The audio connector is connected to external audio devices including speakers and microphones for the input and output of audio signals to and from the system.
NOVA-HM551 5.25" SBC 3.2.2 Battery Connector CN Label: BAT1 CN Type: 2-pin wafer (1x2) CN Location: See Figure 3-3 CN Pinouts: See Table 3-4 This is connected to the system battery. The battery provides power to the system clock to retain the time when power is turned off. Figure 3-3: Battery Connector Location Pin Description 1 Battery+ (+3.3V) 2 Ground Table 3-4: Battery Connector Pinouts 3.2.
NOVA-HM551 5.25" SBC Figure 3-4: Digital I/O Connector Locations Pin Description Pin Description 1 GND 2 +5V 3 Output 3 4 Output 2 5 Output 1 6 Output 0 7 Input 3 8 Input 2 9 Input 1 10 Input 0 Table 3-5: Digital I/O Connector Pinouts 3.2.4 Fan Connector (CPU) CN Label: CPU_FAN1 CN Type: 4-pin wafer (1x4) CN Location: See Figure 3-5 CN Pinouts: See Table 3-6 The fan connector attaches to a CPU cooling fan.
NOVA-HM551 5.25" SBC Figure 3-5: CPU Fan Connector Location Pin Description 1 GROUND 2 +12V 3 CPUFANIN 4 CPUFANOUT Table 3-6: CPU Fan Connector Pinouts 3.2.5 Fan Connector (System) CN Label: SYS_FAN1 CN Type: 3-pin wafer (1x3) CN Location: See Figure 3-6 CN Pinouts: See Table 3-7 6 6 The cooling fan connector provides a 12V, 500mA current to the cooling fan.
NOVA-HM551 5.25" SBC Figure 3-6: +12V Fan Connector Locations Pin Description 1 SYSFANIN0 2 +12V 3 GND Table 3-7: +12V Fan Connector Pinouts 3.2.6 Front Panel Connector CN Label: F_PANEL1 CN Type: 10-pin header (1x10) CN Location: See Figure 3-7 CN Pinouts: See Table 3-8 The front panel connector connects to external switches and indicators to monitor and controls the motherboard.
NOVA-HM551 5.25" SBC Figure 3-7: Front Panel Connector Location Function Power Button HDD LED Pin Description Function Pin Description 1 NC Power LED 6 PWR_LED+ 2 PWR_BTN+ 7 PWR_LED+ 3 PWR_BTN- 8 PWR_LED- 4 HDD_LED+ 9 RESET+ 5 HDD_LED- 10 RESET- Reset Table 3-8: Front Panel Connector Pinouts 3.2.
NOVA-HM551 5.25" SBC Figure 3-8: Keyboard/Mouse Connector Location Pin Description 1 +5 VCC 2 MS DATA 3 MS CLK 4 KB DATA 5 KB CLK 6 GROUND Table 3-9: Keyboard/Mouse Connector Pinouts 3.2.8 Backlight Inverter Connector CN Label: INVERTER1 CN Type: 5-pin wafer (1x5) CN Location: See Figure 3-9 CN Pinouts: See Table 3-10 The backlight inverter connector provides power to an LCD panel.
NOVA-HM551 5.25" SBC Figure 3-9: Backlight Inverter Connector Location Pin Description 1 BRIGHTNESS 2 GROUND1 3 +12 V 4 GROUND2 5 BACKLIGHT ENABLE Table 3-10: Backlight Inverter Connector Pinouts 3.2.9 LVDS LCD Connector CN Label: LVDS1 CN Type: 30-pin crimp (2x15) CN Location: See Figure 3-10 CN Pinouts: See Table 3-11 The LVDS connector is for an LCD panel connected to the board.
NOVA-HM551 5.
NOVA-HM551 5.25" SBC 3.2.10 Parallel Port Connector CN Label: LPT1 CN Type: 26-pin box header CN Location: See Figure 3-11 CN Pinouts: See Table 3-12 The parallel port connector connects to a parallel port connector interface or some other parallel port device such as a printer.
NOVA-HM551 5.25" SBC 3.2.11 PCI-104 Connector CN Label: PCI104_PLUS1 CN Type: PCI-104 connector CN Location: See Figure 3-12 CN Pinouts: See Table 3-13 The PCI-104 connector is for installing a PCI-104 expansion card.
NOVA-HM551 5.
NOVA-HM551 5.25" SBC Figure 3-13: PCIe Mini Card Slot Location Pin Description Pin Description 1 PCIE_WAKE# 2 VCC3 3 N/C 4 GND 5 N/C 6 1.5V 7 N/C 8 N/C 9 GND 10 N/C 11 CLK- 12 N/C 13 CLK+ 14 N/C 15 GND 16 N/C 17 PCIRST# 18 GND 19 N/C 20 VCC3 21 GND 22 PCIRST# 23 PERN2 24 3VDual 25 PERP2 26 GND 27 GND 28 1.
NOVA-HM551 5.25" SBC Pin Description Pin Description 49 N/C 50 GND 51 N/C 52 VCC3 Table 3-14: PCIe Mini Card Slot Pinouts 3.2.13 PCI Express x16 Slot CN Label: CONN1 CN Type: PCIe x16 slot CN Location: See Figure 3-14 CN Pinouts: See Table 3-15 (Side A) Table 3-16 (Side B) The PCIe x16 expansion cards slot is for PCIe x16 expansion cards.
NOVA-HM551 5.25" SBC Pin Description Pin Description Pin Description Pin Description A11 +3.
NOVA-HM551 5.25" SBC Pin Description Pin Description Pin Description Pin Description B19 HSOp(1) B40 GND B61 GND B82 RSVD#2 B20 HSOn(1) B41 HSOp(6) B62 HSOp(11) B21 GND B42 HSOn(6) B63 HSOn(11) Table 3-16: PCIe x16 Side B Pinouts 3.2.14 Power Connector (+12V) CN Label: PWR2 CN Type: 4-pin Molex power connector (1x4) CN Location: See Figure 3-15 CN Pinouts: See Table 3-17 The connector supports the 12V power supply.
NOVA-HM551 5.25" SBC 3.2.15 Power Button CN Label: PWR_SW1 CN Type: Push button CN Location: See Figure 3-16 Use the on-board power button to power on/off the motherboard. Figure 3-16: Power Button Location 3.2.16 SATA Drive Connectors CN Label: S_ATA1, S_ATA2, S_ATA5, S_ATA6 CN Type: 7-pin SATA drive connectors CN Location: See Figure 3-17 CN Pinouts: See Table 3-18 6 6 The two SATA 3Gb/s drive connectors are each connected to a SATA 3Gb/s drive.
NOVA-HM551 5.25" SBC Figure 3-17: SATA Drive Connector Locations Pin Description 1 GND 2 TX+ 3 TX- 4 GND 5 RX- 6 RX+ 7 GND Table 3-18: SATA Drive Connector Pinouts 3.2.17 SATA Power Connectors CN Label: SATA_PWR1, SATA_PWR2 CN Type: 2-pin wafer (1x2) CN Location: See Figure 3-18 CN Pinouts: See Table 3-19 The SATA Power Connectors provides +5V power output to the SATA connectors.
NOVA-HM551 5.25" SBC Figure 3-18: SATA Power Connector Locations Pin Description 1 +5V 2 GND Table 3-19: SATA Power Connector Pinouts 3.2.18 Serial Port Connector (RS-232) CN Label: COM1 CN Type: 40-pin header (2x20) CN Location: See Figure 3-19 CN Pinouts: See Table 3-20 6 6 This connector provides RS-232 connections for four serial ports.
NOVA-HM551 5.
NOVA-HM551 5.25" SBC Figure 3-20: Serial Port Connector Location Pin DESCRIPTION Pin DESCRIPTION 1 DATA CARRIER DETECT (DCD#) 2 DATA SET READY (DSR#) 3 RECEIVE DATA (RXD) 4 REQUEST TO SEND (RTS#) 5 TRANSMIT DATA (TXD) 6 CLEAR TO SEND (CTS#) 7 DATA TERMINAL READY (DTR#) 8 RING INDICATOR (RI#) 9 GND 10 GND 11 TXD485+ 12 TXD485# 13 RXD485+ 14 RXD485# Table 3-21: Serial Port Connector Pinouts 3.2.
NOVA-HM551 5.25" SBC Figure 3-21: SMBus Connector Location Pin Description 1 GND 2 SMB_DATA 3 SMB_CLK 4 +5V Table 3-22: SMBus Connector Pinouts 3.2.21 SPI Flash Connector CN Label: JSPI1 CN Type: 8-pin wafer (1x6) CN Location: See Figure 3-22 CN Pinouts: See Table 3-23 The 8-pin SPI Flash connector is used to flash the BIOS.
NOVA-HM551 5.25" SBC Figure 3-22: SPI Flash Connector Locations Pin Description Pin Description 1 SPI_VCC(+3.3V) 2 GND 3 SPI_CS#0 4 SPI_CLK 5 SPI_SO0 6 SPI_SI 7 N/C 8 N/C Table 3-23: SPI Flash Connector Pinouts 3.2.22 USB Connectors CN Label: USB1, USB2, USB3, USB4 CN Type: 8-pin header (2x4) CN Location: See Figure 3-23 CN Pinouts: See Table 3-24 The USB connectors connect to USB devices. Each pin header provides two USB ports.
NOVA-HM551 5.25" SBC Pin Description Pin Description 1 VCC (+5V) 2 GND 3 DATA- 4 DATA+ 5 DATA+ 6 DATA- 7 GND 8 VCC (+5V) Table 3-24: USB Port Connector Pinouts 3.2.23 VGA Connector (Internal) CN Label: VGA1 CN Type: 10-pin box header CN Location: See Figure 3-24 CN Pinouts: See Table 3-25 The VGA connector connects to a monitor.
NOVA-HM551 5.25" SBC NOTE: The Intel® HD Graphics is NOT integrated in all the Intel® Core™ i7 Desktop processor family and Intel® Core™ i5-700 series processor. An additional graphic card must be installed in order to support display output. Otherwise, the display will show “No display output” when connected to the on-board VGA port. Reference Intel® Core i3 Desktop CPU: http://ark.intel.com/ProductCollection.aspx?familyID=43129&MarketSegment=DT Intel® Core i5 Desktop CPU: http://ark.intel.
NOVA-HM551 5.25" SBC 3.3.1 Ethernet Connector CN Label: LAN1, LAN2 CN Type: RJ-45 CN Location: See Figure 3-25 CN Pinouts: See Table 3-26 6 6 The NOVA-HM551 is equipped with two built-in RJ-45 Ethernet controllers. Each controller can connect to the LAN through one RJ-45 LAN connector.
NOVA-HM551 5.25" SBC 3.3.2 HDMI Connectors CN Label: HDMI1, HDMI2 CN Type: HDMI type A connector CN Location: See Figure 3-25 CN Pinouts: See Table 3-28 6 6 The HDMI (High-Definition Multimedia Interface) connector connects to digital audio or video sources.
NOVA-HM551 5.
NOVA-HM551 5.25" SBC 4.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the NOVA-HM551 may result in permanent damage to the NOVA-HM551 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the NOVA-HM551. Dry climates are especially susceptible to ESD.
NOVA-HM551 5.25" SBC 4.2 Installation Considerations NOTE: The following installation notices and installation considerations should be read and understood before the NOVA-HM551 is installed. All installation notices pertaining to the installation of the NOVA-HM551 should be strictly adhered to. Failing to adhere to these precautions may lead to severe damage of the NOVA-HM551 and injury to the person installing the motherboard. 4.2.
NOVA-HM551 5.25" SBC o When working with the NOVA-HM551, make sure that it is disconnected from all power supplies and that no electricity is being fed into the system. Before and during the installation of the NOVA-HM551 DO NOT: Remove any of the stickers on the PCB board. These stickers are required for warranty validation. Use the product before verifying all the cables and power connectors are properly connected.
NOVA-HM551 5.25" SBC 4.4.1 Socket G1 CPU Installation WARNING: CPUs are expensive and sensitive components. When installing the CPU please be careful not to damage it in anyway. Make sure the CPU is installed properly and ensure the correct cooling kit is properly installed. To install a socket G1 CPU onto the NOVA-HM551, follow the steps below: WARNING: When handling the CPU, only hold it on the sides. DO NOT touch the pins at the bottom of the CPU. Step 1: Unlock the CPU retention screw.
NOVA-HM551 5.25" SBC Figure 4-1: Make sure the CPU socket retention screw is unlocked Step 2: Inspect the CPU socket. Make sure there are no bent pins and make sure the socket contacts are free of foreign material. If any debris is found, remove it with compressed air. Step 3: Correctly Orientate the CPU. Make sure the IHS (integrated heat sink) side is facing upwards. Step 4: Correctly position the CPU. Match the Pin 1 mark with the cut edge on the CPU socket. See Figure 4-1. Step 5: Align the CPU pins.
NOVA-HM551 5.25" SBC Figure 4-2: Lock the CPU Socket Retention Screw 4.4.2 Socket G1 Cooling Kit Installation An IEI Socket G1 CPU cooling kit can be purchased separately. (See Chapter 3) The cooling kit comprises a CPU heat sink and a cooling fan. WARNING: Do not wipe off (accidentally or otherwise) the pre-sprayed layer of thermal paste on the bottom of the heat sink. The thermal paste between the CPU and the heat sink is important for optimum heat dissipation.
NOVA-HM551 5.25" SBC Figure 4-3: Cooling Kit Support Bracket Step 2: Open the lever at the top of the heat sink. Lift the lever at the top of the cooling kit to loosen the cooling kit clamps. Step 3: Secure the cooling kit. Gently place the heat sink and cooling kit onto the CPU. Make sure the hooks are properly secured to the bracket. To secure the cooling kit, close the top lever. Step 4: Connect the fan cable. Connect the cooling kit fan cable to the fan connector on the NOVA-HM551.
NOVA-HM551 5.25" SBC 4.4.3 SO-DIMM Installation To install an SO-DIMM, please follow the steps below and refer to Figure 4-4. Figure 4-4: SO-DIMM Installation Step 1: Open the SO-DIMM socket handles. Open the two handles outwards as far as they can. See Figure 4-4. Step 2: Align the SO-DIMM with the socket. Align the SO-DIMM so the notch on the memory lines up with the notch on the memory socket. See Figure 4-4. Step 3: Insert the SO-DIMM. Once aligned, press down until the SO-DIMM is properly seated.
NOVA-HM551 5.25" SBC 4.5 Jumper Settings NOTE: A jumper is a metal bridge used to close an electrical circuit. It consists of two or three metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To CLOSE/SHORT a jumper means connecting the pins of the jumper with the plastic clip and to OPEN a jumper means removing the Figure 4-5: Jumper Locations plastic clip from a jumper.
NOVA-HM551 5.25" SBC 4.5.1 AT/ATX Power Select Jumper Label: J_ATXCTL1 Jumper Type: 3-pin header (1x3) Jumper Settings: See Table 4-2 Jumper Location: See Figure 4-6 The AT/ATX Power Select jumper specifies the systems power mode as AT or ATX. AT/ATX Power Select jumper settings are shown in Table 4-2.
NOVA-HM551 5.25" SBC Jumper Location: See Figure 4-7 6 If the NOVA-HM551 fails to boot due to improper BIOS settings, the clear CMOS jumper clears the CMOS data and resets the system BIOS information. To do this, use the jumper cap to close pins 2 and 3 for a few seconds then reinstall the jumper clip back to pins 1 and 2. If the “CMOS Settings Wrong” message is displayed during the boot up process, the fault may be corrected by pressing the F1 to enter the CMOS Setup menu.
NOVA-HM551 5.25" SBC 4.5.3 COM 5 Function Select Jumper Label: JP4 Jumper Type: 8-pin header Jumper Settings: See Table 4-4 Jumper Location: See Figure 4-8 The COM 5 Function Select jumper sets the communication protocol used by the third serial communications port (COM 5) as RS-232, RS-422 or RS-485. The COM 5 Function Select settings are shown in the table below.
NOVA-HM551 5.25" SBC The COM 6 Function Select jumper sets the communication protocol used by the third serial communications port (COM 6) as RS-232, RS-422 or RS-485. The COM 6 Function Select settings are shown in the table below. Setting Description Short 1-2 RS-232 (Default) Short 3-4 RS-422 Short 5-6 RS-485 Short 5-6, 7-8 RS-485 with RTS control Table 4-5: COM 6 Function Select Jumper Settings Figure 4-9: COM 6 Function Select Jumper Location 4.5.
NOVA-HM551 5.25" SBC The LCD voltage selection jumper sets the voltage of the power supplied to the LCD panel. Setting Description Short 1-2 +3.3 V (Default) Short 2-3 +5.0 V Table 4-6: LVDS Voltage Selection Jumper Settings Figure 4-10: LVDS Voltage Selection Jumper Locations 4.5.
NOVA-HM551 5.
NOVA-HM551 5.25" SBC This jumper selects the voltage supplied to the PCI-104 expansion module. Setting Description Short 1-2 +5.0 V (Default) Short 2-3 +3.3 V Table 4-8: PCI-104 Voltage Jumper Settings Figure 4-12: PCI-104 Voltage Jumper Location 4.6 Chassis Installation 4.6.1 Airflow WARNING: Airflow is critical to the cooling of the CPU and other onboard components. The chassis in which the NOVA-HM551 must have air vents to allow cool air to move into the system and hot air to move out.
NOVA-HM551 5.25" SBC 4.6.2 Motherboard Installation To install the NOVA-HM551 motherboard into the chassis please refer to the reference material that came with the chassis. 4.7 Internal Peripheral Device Connections This section outlines the installation of peripheral devices to the onboard connectors 4.7.1 Audio Kit Installation The Audio Kit that came with the NOVA-HM551 connects to the audio connector on the NOVA-HM551. The audio kit consists of three audio jacks. Mic-in connects to a microphone.
NOVA-HM551 5.25" SBC Figure 4-13: Audio Kit Cable Connection Step 3: Connect the audio devices. Connect speakers to the line-out audio jack. Connect the output of an audio device to the line-in audio jack. Connect a microphone to the mic-in audio jack.Step 0: 4.7.2 Keyboard/Mouse Connector The NOVA-HM551 is shipped with a keyboard/mouse Y-cable connector.
NOVA-HM551 5.25" SBC Step 3: Insert the cable connectors. Once the cable connector is properly aligned with the keyboard/mouse connector on the NOVA-HM551, connect the cable connector to the on-board connectors. See Figure 4-14. Figure 4-14: Keyboard/mouse Y-cable Connection Step 4: Attach PS/2 connectors to the chassis. The keyboard/mouse Y-cable connector is connected to two PS/2 connectors.
NOVA-HM551 5.25" SBC 4.7.3 PCIe Mini Card Installation To install the PCIe Mini card, please refer to the diagram and instructions below. Figure 4-15: PCIe Mini Card Installation Step 1: Insert into the socket at and angle. Line up the notch on the card with the notch on the connector. Slide the PCIe Mini card into the socket at an angle of about 20º. Step 2: Push down until the card clips into place. Push the other end of the card down until it clips into place on the plastic connector.Step 0: 4.7.
NOVA-HM551 5.25" SBC Step 3: Connect the SATA power cable. Connect the SATA power connector into the on-board SATA power connector. See Figure 4-16. Step 4: Connect the cable to the SATA disk. Connect the connector on the other end of the cable to the connector at the back of the SATA drive. See Figure 4-16. Figure 4-16: SATA Drive Connection 4.7.5 Four Serial Port Connector The 40-pin serial port connector connects the board connector to four DB-9 connectors. To install, please follow the steps below.
NOVA-HM551 5.25" SBC Figure 4-17: Four Serial Port Connector Step 3: Secure the serial ports to the chassis. Tighten the screws on the DB-9 connectors to secure them to the chassis.Step 0: Figure 4-18: Serial Device Connector 4.7.6 USB Cable The NOVA-HM551 is shipped with a dual port USB 2.0 cable. To connect the USB cable connector, please follow the steps below. Step 1: Locate the connectors. The locations of the USB connectors are shown in Chapter 3.
NOVA-HM551 5.25" SBC WARNING: If the USB pins are not properly aligned, the USB device can burn out. Step 2: Align the connectors. The cable has two connectors. Correctly align pin 1on each cable connector with pin 1 on the NOVA-HM551 USB connector. Step 3: Insert the cable connectors. Once the cable connectors are properly aligned with the USB connectors on the NOVA-HM551, connect the cable connectors to the on-board connectors. See Figure 4-19.
NOVA-HM551 5.25" SBC 4.8 External Peripheral Interface Connection The following external peripheral devices can be connected to the external peripheral interface connectors. HDMI devices RJ-45 Ethernet cable connector To install these devices, connect the corresponding cable connector from the actual device to the corresponding NOVA-HM551 external peripheral interface connector making sure the pins are properly aligned. 4.8.
NOVA-HM551 5.25" SBC Step 3: Insert the HDMI connector. Gently insert the HDMI connector. The connector should engage with a gentle push. If the connector does not insert easily, check again that the connector is aligned correctly, and that the connector is being inserted with the right way up. Step 0: 4.8.2 LAN Connection There are two external RJ-45 LAN connectors. The RJ-45 connector enables connection to an external network.
NOVA-HM551 5.25" SBC 4.9 Software Installation All the drivers for the NOVA-HM551 are on the CD that came with the system. To install the drivers, please follow the steps below. Step 1: Insert the CD into a CD drive connected to the system. NOTE: If the installation program doesn't start automatically: Click "Start->My Computer->CD Drive->autorun.exe" Step 2: The driver main menu appears (Figure 4-22). Figure 4-22: Introduction Screen Step 3: Click NOVA-HM551.
NOVA-HM551 5.25" SBC Figure 4-23: Available Drivers Step 5: Install all of the necessary drivers in this menu.
NOVA-HM551 5.
NOVA-HM551 5.25" SBC 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. 5.1.1 Starting Setup The UEFI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways. 1. Press the F2 key as soon as the system is turned on or 2. Press the F2 key when the “Press F2 to enter SETUP” message appears on the screen. 0.
NOVA-HM551 5.25" SBC Key Function Esc Main Menu – Quit and do not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu -Exit current page and return to Main Menu F1 General help, only for Status Page Setup Menu and Option Page Setup Menu F9 Load optimized defaults F10 Save changes and Exit BIOS Table 5-1: BIOS Navigation Keys 5.1.
NOVA-HM551 5.25" SBC 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit BIOS Information BIOS Vendor Core Version Project Version Build Date American Megatrends 4.6.3.7 0.16 E349AR10.ROM 12/28/2010 16:23:19 Set the Time. Use Tab to switch between Time elements.
NOVA-HM551 5.25" SBC Î System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year. Î System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds. 5.3 Advanced Use the Advanced menu (BIOS Menu 2) to configure the CPU and peripheral devices through the following sub-menus: WARNING! Setting the wrong values in the sections below may cause the system to malfunction.
NOVA-HM551 5.25" SBC 5.3.1 ACPI Configuration The ACPI Configuration menu (BIOS Menu 3) configures the Advanced Configuration and Power Interface (ACPI) options. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced ACPI Sleep State [S1 (CPU Stop Clock)] Set the ACPI state used for System suspend ---------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save ESC Exit Version 2.10.1208.
NOVA-HM551 5.25" SBC 5.3.2 Trusted Computing Use the Trusted Computing menu (BIOS Menu 4) to configure settings related to the Trusted Computing Group (TCG) Trusted Platform Module (TPM). Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced TPM Configuration TPM SUPPORT TPM State Pending TPM operation [Enable] [Disabled] [None] Current TPM Status Information TPM Enabled Status: TPM Active Status: TPM Owner Status: [Disable] [Deactivated] [Unowned] Enables or Disables TPM support.
NOVA-HM551 5.25" SBC 5.3.3 CPU Configuration Use the CPU Configuration menu (BIOS Menu 5) to view detailed CPU specifications and configure the CPU. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
NOVA-HM551 5.25" SBC 5.3.4 SATA Configuration Use the SATA Configuration menu (BIOS Menu 6) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced SATA Configuration SATA SATA SATA SATA (1) IDE Mode. (2) AHCI Mode. (3) RAID Mode.
NOVA-HM551 5.25" SBC Î Enhanced Configures the Serial-ATA controller to be in enhanced mode. In this mode, IDE channels and SATA channels are separated. Some legacy OS do not support this mode. Î Compatible Configures the Serial-ATA controller to be in compatible mode. In this mode, a SATA channel will replace one of the IDE channels. 5.3.5 USB Configuration Use the USB Configuration menu (BIOS Menu 7) to read USB configuration information and configure the USB settings.
NOVA-HM551 5.25" SBC Î All USB Devices [Enabled] Use the All USB Devices option to enable the USB devices. Î Î Disabled Î Enabled All USB devices are disabled. DEFAULT All USB devices are enabled. Legacy USB Support [Enabled] Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support. Normally if this option is not enabled, any attached USB mouse or USB keyboard does not become available until a USB compatible operating system is fully booted with all USB drivers loaded.
NOVA-HM551 5.25" SBC 5.3.6 Super IO Configuration Use the Super IO Configuration menu (BIOS Menu 8) to set or change the configurations for the FDD controllers, parallel ports and serial ports. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
NOVA-HM551 5.25" SBC 5.3.6.1.1 COM1 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port. Î Î Disabled Î Enabled Disable the serial port DEFAULT Enable the serial port Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address. Î Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.
NOVA-HM551 5.25" SBC Î Î Enabled DEFAULT Enable the serial port Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address. Î Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.
NOVA-HM551 5.25" SBC Î Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.
NOVA-HM551 5.25" SBC Î Î Î IO=2E8h; Serial Port I/O port address is 2E8h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2D0h; Serial Port I/O port address is 2D0h and the interrupt IRQ=10, 11 address is IRQ10, 11 IO=2D8h; Serial Port I/O port address is 2D8h and the interrupt IRQ=10, 11 address is IRQ10, 11 5.3.6.1.5 COM5 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.
NOVA-HM551 5.25" SBC 5.3.6.1.6 COM6 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port. Î Î Disabled Î Enabled Disable the serial port DEFAULT Enable the serial port Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address. Î Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.
NOVA-HM551 5.25" SBC Î Î Disabled Î Enabled Disable the parallel port DEFAULT Enable the parallel port Change Settings [Auto] Use the Change Settings option to change the parallel port IO port address and interrupt address. Î Auto DEFAULT The parallel port IO port address and interrupt address are automatically detected.
NOVA-HM551 5.25" SBC 5.3.7 H/W Monitor The H/W Monitor menu (BIOS Menu 10) shows the operating temperature, fan speeds and system voltages. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Advanced PC Health Status CPU Temperature SYS Temperature CPU FAN Speed SYS FAN Speed VCC3V V_core +5V +12V +1.5V VSB3V VBAT :+40 C :+28 C :4587 RPM :N/A :+3.344 V :+1.088 V :+5.129 V :+11.176 V :+1.600 V :+3.344 V :+3.
NOVA-HM551 5.25" SBC Î Manual Mode The fan spins at the speed set in: Manual Duty Cycle Setting (Min=0, Max=100) NOTE: Smart fan functions are supported only when using a 4-pin fan. When using a 3-pin fan, the functions are not supported. Î First Boundary Temperature [60] WARNING: CPU failure can result if this value is set too high When the fan is off, it will only start when the temperature exceeds this setting.
NOVA-HM551 5.25" SBC Î Third Boundary Temperature [40] WARNING: CPU failure can result if this value is set too high When the fan is off, it will only start when the temperature exceeds this setting. Î Minimum Value: 0°C Maximum Value: 127°C Fourth Boundary Temperature [30] WARNING: CPU failure can result if this value is set too high When the fan is off, it will only start when the temperature exceeds this setting.
NOVA-HM551 5.25" SBC o o o o o +5V +12 V +1.5V VSB3V VBAT 5.3.8 Serial Port Console Redirection The Serial Port Console Redirection menu (BIOS Menu 11) allows the console redirection options to be configured. Console redirection allows users to maintain a system remotely by re-directing keyboard input and text output through the serial port. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
NOVA-HM551 5.25" SBC Î Disabled Disabled the console redirection function Î Enabled Enabled the console redirection function 5.3.8.1 Console Redirection Settings The Console Redirection Settings menu (BIOS Menu 12) allows the console redirection options to be configured. The option is active when Console Redirection option is enabled. Aptio Setup Utility – Copyright (C) 2009 American Megatrends, Inc.
NOVA-HM551 5.25" SBC Î Bits per second [115200] Use the Bits per second option to specify the transmission speed of the serial port. Î 9600 The transmission speed is 9600 Î 19200 The transmission speed is 19200 Î 57600 The transmission speed is 57600 Î 115200 DEFAULT The transmission speed is 115200 5.
NOVA-HM551 5.25" SBC 5.4.1 North Bridge Configuration Use the North Bridge Chipset Configuration menu (BIOS Menu 14) to configure the Northbridge chipset. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
NOVA-HM551 5.25" SBC Î IGD Memory [64 MB] Use the IGD Memory option to specify the amount of system memory that can be used by the Internal graphics device. Î Disable Î 32 MB Î 64 MB 32 MB of memory used by internal graphics device DEFAULT 64 MB of memory used by internal graphics device 5.4.2 South Bridge Configuration Use the South Bridge Configuration menu (BIOS Menu 15) to configure the Southbridge chipset. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
NOVA-HM551 5.25" SBC Î Azalia HD Audio [Enabled] Use the Azalia HD Audio option to enable or disable the High Definition Audio controller. Î Disabled Î Enabled The onboard High Definition Audio controller is disabled DEFAULT The onboard High Definition Audio controller automatically detected and enabled Î Set Spread Spectrum [Disabled] Use the Set Spread Spectrum option to reduce the EMI. Excess EMI is generated when the system clock generator pulses have extreme values.
NOVA-HM551 5.25" SBC 5.4.3 Intel IGD SWSCI OpRegion Use the Intel IGD SWSCI OpRegion menu to configure the video device connected to the system. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Chipset Intel IGD SWSCI OpRegion Configuration DVMT/FIXED Memory Active LFP LCD Panel Type Panel ID Resolution [Maximum] [Enable LVDS] [Select by Panel ID] 1024x768 18bit Select the DVMT/FIXED Mode Memory size used by Internal Graphics Device.
NOVA-HM551 5.25" SBC Î LCD Panel Type [Select by Panel ID] Use the LCD Panel Type option to select the type of flat panel connected to the system. Configuration options are listed below.
NOVA-HM551 5.25" SBC 5.5 Boot Use the Boot menu (BIOS Menu 17) to configure system boot options. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Boot Configuration Quiet Boot Bootup NumLock State Realtek 8111E PXE OpROM [Enabled] [On] [Disabled] Enables/Disables Quiet Boot option --------------------ÅÆ: Select Screen ↑ ↓: Select Item Enter Select F1 General Help F2 Previous Values F3 Optimized Defaults F4 Save ESC Exit Version 2.10.1208.
NOVA-HM551 5.25" SBC Î On DEFAULT Allows the Number Lock on the keyboard to be enabled automatically when the computer system boots up. This allows the immediate use of the 10-key numeric keypad located on the right side of the keyboard. To confirm this, the Number Lock LED light on the keyboard is lit. Î Realtek 8111E PXE OpROM [Disabled] Use the Realtek 8111E PXE OpROM option to enable the Realtek 8111E PCIe GbE controller to boot the system.
NOVA-HM551 5.25" SBC Î User Password Use the User Password to set or change a user password. 5.7 Exit Use the Exit menu (BIOS Menu 19) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Save Changes and Reset Discard Changes and Reset Exit system setup after saving the changes.
NOVA-HM551 5.25" SBC Î Save as User Defaults Use the Save as User Defaults option to save the changes done so far as user defaults. Î Restore User Defaults Use the Restore User Defaults option to restore the user defaults to all the setup options.
NOVA-HM551 5.
NOVA-HM551 5.25" SBC BIOS Information .................................................................................................................76 Memory Information ............................................................................................................76 System Date [xx/xx/xx] ........................................................................................................77 System Time [xx:xx:xx] ..........................................................................
NOVA-HM551 5.25" SBC Terminal Type [ANSI]...........................................................................................................95 Bits per second [115200].....................................................................................................96 Initiate Graphics Adapter [PEG/IGD]..................................................................................97 IGD Memory [64 MB]...............................................................................................
NOVA-HM551 5.
NOVA-HM551 5.25" SBC B.1 One Key Recovery Introduction The IEI one key recovery is an easy-to-use front end for the Norton Ghost system backup and recovery tool. The one key recovery provides quick and easy shortcuts for creating a backup and reverting to that backup or for reverting to the factory default settings. The IEI One Key Recovery tool menu is shown below.
NOVA-HM551 5.25" SBC B.1.1 System Requirement NOTE: The recovery CD can only be used with IEI products. The software will fail to run and a warning message will appear when used on non-IEI hardware. To create the system backup, the main storage device must be split into two partitions (three partitions for Linux). The first partition will be for the operating system, while the second partition will be invisible to the operating system and contain the backup made by the one key recovery software.
NOVA-HM551 5.25" SBC NOTE: Specialized tools are required to change the partition size if the operating system is already installed. B.1.2 Supported Operating System The recovery CD is compatible with both Microsoft Windows and Linux operating system (OS). The supported OS versions are listed below. Microsoft Windows o o o o o o Windows Vista Windows 7 Windows CE 5.0 Windows CE 6.
NOVA-HM551 5.25" SBC NOTE: Installing unsupported OS versions may cause the recovery tool to fail. B.2 Setup Procedure for Windows Prior to using the recovery tool to backup or restore Windows system, a few setup procedures are required. Step 1: Hardware and BIOS setup (see Section B.2.1) 7 Step 2: Create partitions (see Section B.2.2) 7 Step 3: Install operating system, drivers and system applications (see Section B.2.3) 7 Step 4: Build-up recovery partition (see Section B.2.
NOVA-HM551 5.25" SBC Step 4: Turn on the system. Step 5: Press the key as soon as the system is turned on to enter the BIOS. Step 6: Select the connected optical disk drive as the 1st boot device. (Boot Æ Boot Device Priority Æ 1st Boot Device). Step 7: Save changes and restart the computer. Continue to the next section for instructions on partitioning the internal storage.Step0: B.2.
NOVA-HM551 5.25" SBC Step 3: The recovery tool setup menu is shown as below. Figure B-3: Recovery Tool Setup Menu Step 4: Press <5> then . Figure B-4: Command Mode Step 5: The command prompt window appears. Type the following commands (marked in red) to create two partitions. One is for the OS installation; the other is for saving recovery files and images which will be an invisible partition.
NOVA-HM551 5.
NOVA-HM551 5.25" SBC NOTE: Use the following commands to check if the partitions were created successfully. Step 6: Press any key to exit the recovery tool and automatically reboot the system. Please continue to the following procedure: Build-up Recovery Partition.Step0: B.2.3 Install Operating System, Drivers and Applications Install the operating system onto the unlabelled partition.
NOVA-HM551 5.25" SBC B.2.4 Build-up Recovery Partition Step 1: Put the recover CD in the optical drive. Step 2: Start the system. Step 3: Boot the system from recovery CD. When prompted, press any key to boot from the recovery CD. It will take a while to launch the recovery tool. Please be patient! Figure B-6: Launching the Recovery Tool Step 4: When the recovery tool setup menu appears, press <2> then .
NOVA-HM551 5.25" SBC recovery files in Section B.2.2 is hidden and the recovery tool is saved in this 7 partition. Figure B-8: Build-up Recovery Partition Step 6: After completing the system configuration, press any key in the following window to reboot the system. Figure B-9: Press any key to continue Step 7: Eject the recovery CD.
NOVA-HM551 5.25" SBC B.2.5 Create Factory Default Image NOTE: Before creating the factory default image, please configure the system to a factory default environment, including driver and application installations. To create a factory default image, please follow the steps below. Step 1: Turn on the system. When the following screen displays (Figure B-10), press 7 the key to access the recovery tool.
NOVA-HM551 5.25" SBC Figure B-12: About Symantec Ghost Window Step 4: Use mouse to navigate to the option shown below (Figure B-13). 7 Figure B-13: Symantec Ghost Path Step 5: Select the local source drive (Drive 1) as shown in Figure B-14. Then click OK.
NOVA-HM551 5.25" SBC Figure B-14: Select a Local Source Drive Step 6: Select a source partition (Part 1) from basic drive as shown in Figure B-15. 7 Then click OK. Figure B-15: Select a Source Partition from Basic Drive Step 7: Select 1.2: [Recovery] NTFS drive and enter a file name called iei (Figure B-16). Click Save. The factory default image will then be saved in the 7 selected recovery drive and named IEI.GHO. WARNING: The file name of the factory default image must be iei.GHO.
NOVA-HM551 5.25" SBC Figure B-16: File Name to Copy Image to Step 8: When the Compress Image screen in Figure B-17 prompts, click High to make 7 the image file smaller.
NOVA-HM551 5.25" SBC Step 9: The Proceed with partition image creation window appears, click Yes to continue. Figure B-18: Image Creation Confirmation Step 10: The Symantec Ghost starts to create the factory default image (Figure B-19). 7 Figure B-19: Image Creation Process Step 11: When the image creation completes, a screen prompts as shown in Figure B-20. 7 Click Continue and close the Ghost window to exit the program.
NOVA-HM551 5.25" SBC Step 12: The recovery tool main menu window is shown as below. Press any key to reboot the system. Step0: Figure B-21: Press Any Key to Continue B.3 Setup Procedure for Linux The initial setup procedures for Linux system are mostly the same with the procedure for Microsoft Windows. Please follow the steps below to setup recovery tool for Linux OS. Step 1: Hardware and BIOS setup. Refer to Section B.2.1. 7 Step 2: Install Linux operating system. Make sure to install GRUB (v0.
NOVA-HM551 5.25" SBC NOTE: Please reserve enough space for partition 3 for saving recovery images. Figure B-22: Partitions for Linux Step 3: Create a recovery partition. Insert the recovery CD into the optical disk drive. Follow Step 1 ~ Step 3 described in Section B.2.2. Then type the following 7 commands (marked in red) to create a partition for recovery images.
NOVA-HM551 5.25" SBC Figure B-23: System Configuration for Linux Step 5: Access the recovery tool main menu by modifying the “menu.lst”. To first access the recovery tool main menu, the menu.lst must be modified. In Linux system, enter Administrator (root). When prompt appears, type: cd /boot/grub vi menu.lst Figure B-24: Access menu.lst in Linux (Text Mode) Step 6: Modify the menu.lst as shown below.
NOVA-HM551 5.25" SBC Step 7: The recovery tool menu appears. (Figure B-25) 7 Figure B-25: Recovery Tool Menu Step 8: Create a factory default image. Follow Step 2 ~ Step 12 described in Section B.2.5 to create a factory default image. 7 B.4 Recovery Tool Functions After completing the initial setup procedures as described above, users can access the recovery tool by pressing while booting up the system. The main menu of the recovery tool is shown below.
NOVA-HM551 5.25" SBC Figure B-26: Recovery Tool Main Menu The recovery tool has several functions including: 1. Factory Restore: Restore the factory default image (iei.GHO) created in Section B.2.5. 7 2. Backup system: Create a system backup image (iei_user.GHO) which will be saved in the hidden partition. 3. Restore your last backup: Restore the last system backup image 4. Manual: Enter the Symantec Ghost window to configure manually. 5. Quit: Exit the recovery tool and restart the system.
NOVA-HM551 5.25" SBC B.4.1 Factory Restore To restore the factory default image, please follow the steps below. Step 1: Type <1> and press in the main menu. Step 2: The Symantec Ghost window appears and starts to restore the factory default. A factory default image called iei.GHO is created in the hidden Recovery partition. Figure B-27: Restore Factory Default Step 3: The screen is shown as in Figure B-28 when completed. Press any key to 7 reboot the system.
NOVA-HM551 5.25" SBC B.4.2 Backup System To backup the system, please follow the steps below. Step 1: Type <2> and press in the main menu. Step 2: The Symantec Ghost window appears and starts to backup the system. A backup image called iei_user.GHO is created in the hidden Recovery partition. Figure B-29: Backup System Step 3: The screen is shown as in Figure B-30 when system backup is completed. 7 Press any key to reboot the system.
NOVA-HM551 5.25" SBC B.4.3 Restore Your Last Backup To restore the last system backup, please follow the steps below. Step 1: Type <3> and press in the main menu. Step 2: The Symantec Ghost window appears and starts to restore the last backup image (iei_user.GHO). Figure B-31: Restore Backup Step 3: The screen is shown as in Figure B-32 when backup recovery is completed. 7 Press any key to reboot the system.
NOVA-HM551 5.25" SBC B.4.4 Manual To restore the last system backup, please follow the steps below. Step 1: Type <4> and press in the main menu. Step 2: The Symantec Ghost window appears. Use the Ghost program to backup or recover the system manually. Figure B-33: Symantec Ghost Window Step 3: When backup or recovery is completed, press any key to reboot the system.
NOVA-HM551 5.25" SBC B.5 Other Information B.5.1 Using AHCI Mode or ALi M5283 / VIA VT6421A Controller When the system uses AHCI mode or some specific SATA controllers such as ALi M5283 or VIA VT6421A, the SATA RAID/AHCI driver must be installed before using one key recovery. Please follow the steps below to install the SATA RAID/AHCI driver. Step 1: Copy the SATA RAID/AHCI driver to a floppy disk and insert the floppy disk into a USB floppy disk drive.
NOVA-HM551 5.25" SBC Step 5: When the following window appears, press to select “Specify Additional Device”. Step 6: In the following window, select a SATA controller mode used in the system. Then press . The user can now start using the SATA HDD.
NOVA-HM551 5.25" SBC Step 7: After pressing , the system will get into the recovery tool setup menu. Continue to follow the setup procedure from Step 4 in Section B.2.2 Create 7 Partitions to finish the whole setup process.Step0: B.5.2 System Memory Requirement To be able to access the recovery tool by pressing while booting up the system, please make sure to have enough system memory. The minimum memory requirement is listed below.
NOVA-HM551 5.
NOVA-HM551 5.25" SBC AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration and Power Interface (ACPI) is an OS-directed configuration, power management, and thermal management interface. AHCI Advanced Host Controller Interface (AHCI) is a SATA Host controller register-level interface. ATA The Advanced Technology Attachment (ATA) interface connects storage devices including hard disks and CD-ROM drives to a computer.
NOVA-HM551 5.25" SBC computer is usually a male DE-9 connector. DAC The Digital-to-Analog Converter (DAC) converts digital signals to analog signals. DDR Double Data Rate refers to a data bus transferring data on both the rising and falling edges of the clock signal. DMA Direct Memory Access (DMA) enables some peripheral devices to bypass the system processor and communicate directly with the system memory.
NOVA-HM551 5.25" SBC PCIe PCI Express (PCIe) is a communications bus that uses dual data lines for full-duplex (two-way) serial (point-to-point) communications between the SBC components and/or expansion cards and the SBC chipsets. Each line has a 2.5 Gbps data transmission rate and a 250 MBps sustained data transfer rate. POST The Power-on Self Test (POST) is the pre-boot actions the system performs when the system is turned-on.
NOVA-HM551 5.25" SBC USB 2.0 supports 480Mbps data transfer rates. VGA The Video Graphics Array (VGA) is a graphics display system developed by IBM.
NOVA-HM551 5.
NOVA-HM551 5.25" SBC NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website visited for specific drivers for more sophisticated operating systems, e.g., Windows and Linux. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMI or a software bug.
NOVA-HM551 5.25" SBC NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets.
NOVA-HM551 5.
NOVA-HM551 5.25" SBC E.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
NOVA-HM551 5.
NOVA-HM551 5.
