Owner's manual

NOVA-HM551 5.25" SBC
Page 59
The LCD voltage selection jumper sets the voltage of the power supplied to the LCD
panel.
Setting Description
Short 1-2 +3.3 V (Default)
Short 2-3 +5.0 V
Table 4-6: LVDS Voltage Selection Jumper Settings
Figure 4-10: LVDS Voltage Selection Jumper Locations
4.5.6 LVDS Panel Resolution Select
Jumper Label: J_PID1
Jumper Type:
8-pin header
Jumper Settings:
See
Table 4-7
Jumper Location:
See
Figure 4-11
The LVDS Panel Resolution jumper configures the resolution of the LVDS output. The
LVDS Panel Resolution jumper settings are shown in
Table 4-6.
Setting Description
OFF 640 X 480 (18-bit)
Short 1-2 800 X 600 (18-bit) (Default)