Manual

NOVA-PV-D5251/D4251 5.25" SBC
Page 70
Setting Description
Short 1-2 RS-232 (Default)
Short 3-4 RS-422
Short 5-6 RS-485
Short 5-6, 7-8 RS-485 with RTS control
Table 4-4: COM 6 Function Select Jumper Settings
Figure 4-6: COM 6 Function Select Jumper Location
4.5.4 CompactFlash® Setup
Jumper Label: JCF1
Jumper Type:
2-pin header
Jumper Settings:
See
Table 4-5
Jumper Location:
See
Figure 4-7
The CompactFlash® slot is connected through an IDE connection. This jumper sets the
CompactFlash® card as the master or slave IDE device.
Setting Description
Open Slave (Default)