Instruction Manual

PCIE-G41A2 PICMG 1.3 CPU card
Page 113
Figure B-11: Select a Local Source Drive
Step 6: Select a source partition from basic drive as shown in
Figure B-12. Then click
OK.
Figure B-12: Select a Source Partition from Basic Drive
Step 7: Select 1.2: [Recovery] NTFS drive and enter a file name called iei
(
Figure B-13). Click Save. The factory default image will then be saved in the
selected recovery drive and named IEI.GHO.
WARNING:
The file name of the factory default image must be iei.GHO.