Manual

PCIE-Q350 PICMG 1.3 CPU Card
Page 133
BIOS Menu 10: AHCI Port n Configuration Menu
 SATA Port n [Auto]
Use the SATA Port n option to enable the system to auto-detect the type of drive
connected to SATA drive connector n.

Auto DEFAULT
Automatically detects the drive type connected to the
system

Not Installed
Specifies no device is connected to the serial port n.
 S.M.A.R.T [Enabled]
Use the S.M.A.R.T option to enable S.M.A.R.T (Self-Monitoring, Analysis, and Reporting
Technology) on the drive connected to SATA drive connector n.

Enabled DEFAULT
S.M.A.R.T is enabled on the drive connected to SATA