Owner manual

ManualsBrandsIEI Integration ManualsHardwarePCIE-Q350 v1.12

NPage i

PCIE-Q350 PICMG 1.3 CPU Card

IEI Technology Corp.

User Manual

Intel® Q35 Northbridge PICMG 1.3 CPU Card supports

Intel® LGA775 Core™2 Quad/Core™2 Duo/Celeron® CPU

8GB DDR2, Six SATA 3Gb/s, Twelve USB 2.0

One PCIe x16, Four PCIe x4, Four PCI and Dual PCIe GbE

PCIE-Q350 CPU Card

MODEL:

PCIE-Q350

Rev. 1.12 – 23 February, 2011

Summary of content (250 pages)

PAGE 1
PCIE-Q350 PICMG 1.3 CPU Card PCIE-Q350 CPU Card IEI Technology Corp. MODEL: PCIE-Q350 Intel® Q35 Northbridge PICMG 1.3 CPU Card supports Intel® LGA775 Core™2 Quad/Core™2 Duo/Celeron® CPU 8GB DDR2, Six SATA 3Gb/s, Twelve USB 2.0 One PCIe x16, Four PCIe x4, Four PCI and Dual PCIe GbE User Manual NPage i Rev. 1.
PAGE 2
PCIE-Q350 PICMG 1.3 CPU Card Revision Date Version Changes 23 February, 2011 1.12 Modified Chapter 6: BIOS Screens. 20 May, 2009 1.11 Modified compatible operating system list in Appendix G. 24 November, 2008 1.10 Changed the rear panel dimension drawing in Chapter 2 30 August, 2007 1.
PAGE 3
PCIE-Q350 PICMG 1.3 CPU Card Manual Conventions WARNING! Warnings appear where overlooked details may cause damage to the equipment or result in personal injury. Warnings should be taken seriously. Warnings are easy to recognize. The word “warning” is written as “WARNING,” both capitalized and bold and is followed by text. The text is the warning message. A warning message is shown below: WARNING: This is an example of a warning message.
PAGE 4
PCIE-Q350 PICMG 1.3 CPU Card CAUTION: This is an example of a caution message. Failure to adhere to cautions messages may result in permanent damage to the PCIE-Q350. Please take caution messages seriously. NOTE: These messages inform the reader of essential but non-critical information. These messages should be read carefully as any directions or instructions contained therein can help avoid making mistakes. Notes are easy to recognize.
PAGE 5
PCIE-Q350 PICMG 1.3 CPU Card Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
PAGE 6
PCIE-Q350 PICMG 1.3 CPU Card Packing List NOTE: If any of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the PCIE-Q350 from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@iei.com.tw. The items listed below should all be included in the PCIE-Q350 package.
PAGE 7
PCIE-Q350 PICMG 1.3 CPU Card Table of Contents 1 INTRODUCTION..................................................................................................... 2 1.1 OVERVIEW.................................................................................................................. 3 1.1.1 PCIE-Q350 Expansion Options......................................................................... 4 1.1.2 PCIE-Q350 Features ..................................................................................
PAGE 8
PCIE-Q350 PICMG 1.3 CPU Card 2.5.1 Intel® ICH9DO Overview ................................................................................ 21 2.5.2 Intel® ICH9DO Features ................................................................................. 22 2.5.3 Intel® ICH9DO High Definition Audio Implementation................................. 22 2.5.4 Intel® ICH9DO Ethernet Controller ................................................................ 24 2.5.4.1 Intel® 82566DM Gigabit LAN Connect Device......
PAGE 9
PCIE-Q350 PICMG 1.3 CPU Card 2.8.4 Super I/O Watchdog Timer............................................................................... 38 2.9 ETHERNET LAN CONTROLLERS ............................................................................... 38 2.10 ENVIRONMENTAL AND POWER SPECIFICATIONS ..................................................... 40 2.10.1 System Monitoring ......................................................................................... 40 2.10.
PAGE 10
PCIE-Q350 PICMG 1.3 CPU Card 4.2.11 Trusted Platform Module (TPM) Connector .................................................. 69 4.2.12 SDVO Control Connector .............................................................................. 71 4.2.13 USB Connectors (Internal) ............................................................................ 73 4.3 EXTERNAL PERIPHERAL INTERFACE CONNECTOR PANEL ......................................... 74 4.3.1 LAN Connectors..........................................
PAGE 11
PCIE-Q350 PICMG 1.3 CPU Card 5.8.1 PCIe x16 Graphics Card Installation ............................................................ 101 5.8.2 SDVO Device Installation.............................................................................. 102 5.9 EXTERNAL PERIPHERAL INTERFACE CONNECTION ................................................. 102 5.9.1 LAN Connection (Single Connector) ............................................................. 102 5.9.2 PS/2 Y-Cable Connection.............................
PAGE 12
PCIE-Q350 PICMG 1.3 CPU Card 6.6 SECURITY ............................................................................................................... 146 6.7 CHIPSET ................................................................................................................. 147 6.7.1 North Bridge Configuration........................................................................... 148 6.7.2 South Bridge Configuration...........................................................................
PAGE 13
PCIE-Q350 PICMG 1.3 CPU Card D.4.2 Deleting a RAID Volume ............................................................................... 216 D.4.3 Resetting a Disk to Non-RAID ...................................................................... 218 D.4.4 Exiting the Matrix Storage Manager ............................................................ 220 E HAZARDOUS MATERIALS DISCLOSURE ................................................... 222 E.
PAGE 14
PCIE-Q350 PICMG 1.3 CPU Card List of Figures Figure 1-1: PCIE-Q350 PICMG 1.3 CPU Card ..............................................................................3 Figure 1-2: PCIE-Q350 Overview [Front View]............................................................................5 Figure 2-1: PCIE-Q350 Dimensions (mm) .................................................................................10 Figure 2-2: External Interface Panel Dimensions (mm)..................................................
PAGE 15
PCIE-Q350 PICMG 1.3 CPU Card Figure 4-6: +12V Fan Connector Location ................................................................................60 Figure 4-7: Front Panel Connector Pinout Locations (14-pin)................................................62 Figure 4-8: Infrared Connector Pinout Locations ....................................................................63 Figure 4-9: Keyboard/Mouse Connector Location ...................................................................
PAGE 16
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-1: Introduction Screen .............................................................................................. 156 Figure 7-2: Available Drivers ................................................................................................... 156 Figure 7-3: Intel® Chipset Driver Directory............................................................................ 157 Figure 7-4: Intel® Chipset Driver Setup Icon .................................................
PAGE 17
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-33: Intel® 82573 Driver Startup Icon ....................................................................... 177 Figure 7-34: Intel® 82573 License Agreement....................................................................... 178 Figure 7-35: Intel® 82573 File Location Select ...................................................................... 178 Figure 7-36: Intel® 82573 Installation Files Extraction .........................................................
PAGE 18
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-65: IAMT Readme File ............................................................................................... 196 Figure 7-66: IAMT Setup Operations ...................................................................................... 197 Figure 7-67: Completed Installation .......................................................................................
PAGE 19
PCIE-Q350 PICMG 1.3 CPU Card List of Tables Table 1-1: Technical Specifications.............................................................................................8 Table 2-1: Supported Intel® Core™2 Duo (Conroe) Processors ............................................15 Table 2-2: Supported Intel® Core™2 Duo (Conroe) Processors ............................................15 Table 2-3: Power Consumption.................................................................................................
PAGE 20
PCIE-Q350 PICMG 1.3 CPU Card Table 5-2: Clear CMOS Jumper Settings...................................................................................93 Table 5-3: IEI Provided Cables ...................................................................................................96 Table 6-1: BIOS Navigation Keys ............................................................................................
PAGE 21
PCIE-Q350 PICMG 1.3 CPU Card BIOS Menus Menu 1: Main ............................................................................................................................. 110 Menu 2: Advanced.................................................................................................................... 112 Menu 3: CPU Configuration..................................................................................................... 113 Menu 4: IDE Configuration...................................
PAGE 22
PCIE-Q350 PICMG 1.
PAGE 23
PCIE-Q350 PICMG 1.
PAGE 24
PCIE-Q350 PICMG 1.3 CPU Card 1.1 Overview Figure 1-1: PCIE-Q350 PICMG 1.3 CPU Card The PCIE-Q350 PICMG 1.3 form factor CPU card (Figure 1-1) is an LGA775 Intel® Core™2 Quad, Intel® Core™2 Duo or Intel® Celeron CPU processor platform. Both 45nm core (Wolfdale, Yorkfield) and 65nm core (Conroe) processors are supported. (For a full list of supported processors please refer to Section 2.3) Up to four 2.
PAGE 25
PCIE-Q350 PICMG 1.3 CPU Card 1.1.1 PCIE-Q350 Expansion Options The PCIE-Q350 PICMG 1.3 form CPU card has the following backplane expansion options: 1 x PCIe x16 graphics card 4 x PCIe x1 expansion cards 4 x PCI expansion cards 1.1.2 PCIE-Q350 Features Some of the PCIE-Q350 features are listed below.
PAGE 26
PCIE-Q350 PICMG 1.3 CPU Card Figure 1-2: PCIE-Q350 Overview [Front View] 1.2.2 PCIE-Q350 Peripheral Connectors and Jumpers The PCIE-Q350 has the following connectors on-board: 1 x ATX power connector 1 x Audio connector 1 x Digital input/output (DIO) connector 2 x Fan connectors 1 x Front panel connector 1 x Infrared interface connector 1 x Keyboard/mouse connector 6 x SATA 3Gb/s drive connectors 2 x Serial port connectors 1 x TPM connector 1 x SDVO control connector 3 x USB 2.
PAGE 27
PCIE-Q350 PICMG 1.3 CPU Card 2 x RJ-45 Ethernet connectors 2 x USB 2.0 connectors 1 x VGA connector The PCIE-Q350 has the following on-board jumpers: Clear CMOS 1.2.3 Technical Specifications PCIE-Q350 technical specifications are listed in Table 1-1. See Chapter 2 for details. Specification PCIE-Q350 Form Factor PICMG 1.
PAGE 28
PCIE-Q350 PICMG 1.3 CPU Card 10-pin header 7.1 channel HD audio kit with RealTek ALC883 Audio codec and dual audio streams supported One Intel® 82566DM (PHY) and Intel® ICH9DO (MAC) LAN One PCIe x1 Intel® 82573L (MAC and PHY) COM Two RS-232 serial ports through onboard pin-headers Twelve USB 2.0 devices supported: Six by onboard pin-headers USB2.
PAGE 29
PCIE-Q350 PICMG 1.3 CPU Card 3.3V@3A, 5V@5.1A, +12V@4.23A and 5VSB@0.28A (2.66 GHz E6700 Intel® Core™2 Duo CPU with a 1066MHz Power Consumption FSB and four 2.0 GB, 667 MHz DDR2 DIMM running 2Dmark® 2001 SE 330) Temperature 0ºC – 60ºC (32ºF - 140ºF) Humidity (operating) 5%~95% non-condensing Dimensions (LxW) 338.58mm x 126.39mm Weight (GW) 1.
PAGE 30
PCIE-Q350 PICMG 1.
PAGE 31
PCIE-Q350 PICMG 1.3 CPU Card 2.1 Dimensions 2.1.1 Board Dimensions The dimensions of the board are listed below: Length: 338.58mm Width: 126.39mm Figure 2-1: PCIE-Q350 Dimensions (mm) 2.1.2 External Interface Panel Dimensions External peripheral interface connector panel dimensions are shown in Figure 2-2.
PAGE 32
PCIE-Q350 PICMG 1.3 CPU Card Figure 2-2: External Interface Panel Dimensions (mm) 2.2 Data Flow Figure 2-3 shows the data flow between the two on-board chipsets and other components installed on the motherboard and described in the following sections of this chapter.
PAGE 33
PCIE-Q350 PICMG 1.
PAGE 34
PCIE-Q350 PICMG 1.3 CPU Card 2.3 Compatible Processors 2.3.1 Supported Processors Overview The PCIE-Q350 supports the following Intel® LGA775 processors Intel® Core™2 Quad (Yorkfield) Intel® Core™2 Duo (Wolfdale) Intel® Core™2 Duo (Conroe-2M) Intel® Celeron (Conroe L) 2.3.2 Supported Intel® Core™2 Quad (Yorkfield) Processors The Yorkfield core Intel® Core™2 Quad CPU is a 45nm LGA775 processor.
PAGE 35
PCIE-Q350 PICMG 1.3 CPU Card 2.3.3 Supported Intel® Core™2 Duo (Wolfdale) Processors The Wolfdale core Intel® Core™2 Duo CPU is a 45nm LGA775 processor. NOTE: As of the date of writing this manual (August, 2007), Intel® has not released Wolfdale core Intel® Core™2 Duo processor numbers that are supported by the Intel® Q35 Northbridge. As soon as processor numbers are released, the manual will be updated.
PAGE 36
PCIE-Q350 PICMG 1.3 CPU Card Processor # CPU Speed FSB Speed Cache Size E6400 2.13 GHz 1066 MHz 2 MB E4300 1.80 GHz 800 MHz 2 MB Table 2-1: Supported Intel® Core™2 Duo (Conroe) Processors 2.3.5 Supported Intel® Celeron (Conroe L) Processors Table 2-1 lists the Conroe L core Intel® Celeron processors supported on the PCIE-Q350. All the processors in Table 2-1 are 65nm LGA775 processors with the following features: Execute Disable Bit Processor # 440 CPU Speed 1.
PAGE 37
PCIE-Q350 PICMG 1.3 CPU Card 1333 MHz The LGA775 socket, Intel® Q35 Northbridge and the FSB are shown in Figure 2-4. Figure 2-4: Front Side Bus (FSB) 2.4.3 Intel® Q35 Memory Controller The memory controller on the Intel® Q35 Northbridge can support up to 8.0 GB of DDR2 SDRAM. Four DDR2 SDRAM DIMM sockets on the PCIE-Q350 are interfaced to the Intel® Q35 Northbridge memory controller. The DDR2 sockets are shown in Figure 2-5.
PAGE 38
PCIE-Q350 PICMG 1.3 CPU Card CAUTION: If more than one DDR2 DIMM is being installed in the system, please purchase two DIMM that have the same capacity and operating frequency. Each DIMM socket can support DIMMs with the following specifications: DDR2 only Un-buffered only 667 MHz or 800 MHz 2.0 GB maximum capacity per DIMM (8.0 GB supported with four DIMM) Memory bandwidth: o o 6.4 GBps in single-channel or dual-channel asymmetric mode 12.8 GBps in dual-channel interleaved mode assuming DDR2 800MHz 2.
PAGE 39
PCIE-Q350 PICMG 1.3 CPU Card 2.4.5 Intel® Q35 Graphics and Display Features NOTE: The Intel® Q35 Graphics and Display Features can be configured in the Northbridge BIOS configuration screen. Please refer to Section 6.7.1 on page 148. The Intel® Q35 GMCH integrated graphics device (IGD) has 3D, 2D and video capabilities. The Unified Memory Architecture (UMA) uses up to 256 MB of Dynamic Video Memory Technology (DVMT) for graphics memory.
PAGE 40
PCIE-Q350 PICMG 1.3 CPU Card Figure 2-6: SDVO Connector Some of the capabilities of the Intel® Q35 SDVO port are listed below: Multiplexed with the PCIe x16 graphics port signals Drives pixel clocks up to 270 MHz Supports a single-channel SDVO device.
PAGE 41
PCIE-Q350 PICMG 1.3 CPU Card Figure 2-7: VGA Connector Some of the capabilities of the Intel® Q35 analog CRT port are listed below: 400 MHz Integrated 24-bit RAMDAC Up to 2048x1536 @ 75 Hz refresh Hardware Color Cursor Support DDC2B Compliant Interface 2.4.7 Intel® Q35 Direct Media Interface (DMI) The Direct Media Interface (DMI) is the communication bus between the Intel® Q35 GMCH and the ICH9DO I/O controller hub (ICH).
PAGE 42
PCIE-Q350 PICMG 1.3 CPU Card Figure 2-8: DMI Chip-to-Chip Connection Some of the features of the DMI include: 2.0 GBps point-to-point DMI to ICH9DO (1.0 GBps in each direction) 100 MHz reference clock (shared with PCI Express* Graphics Attach) 32-bit downstream addressing APIC and MSI interrupt messaging support Message Signaled Interrupt (MSI) messages SMI, SCI and SERR error indication 2.5 Intel® ICH9DO Southbridge Chipset 2.5.
PAGE 43
PCIE-Q350 PICMG 1.3 CPU Card 2.5.2 Intel® ICH9DO Features The ICH9DO Southbridge chipset on the PCIE-Q350 has the features listed below. Complies with PCI Express Base Specification, Revision 11 Complies with PCI Local Bus Specification, Revision 2.3 and supports 33MHz PCI operations Supports ACPI Power Management Logic Contains: o o o Enhanced DMA controller Interrupt controller Timer functions Integrated SATA host controller with DMA operations on six ports with data transfer rates up to 1.
PAGE 44
PCIE-Q350 PICMG 1.3 CPU Card A RealTek ALC883 7.1+2 channel High Definition Audio (HDA) codec on an optional IEI® AC-KIT-883HD HDA audio kit is connected to a 10-pin onboard audio connector that is interfaced through the Intel® High Definition Audio serial link to the HDA controller integrated on the Intel® ICH9DO. The audio connector is shown in Figure 2-9.
PAGE 45
PCIE-Q350 PICMG 1.3 CPU Card 2.5.4 Intel® ICH9DO Ethernet Controller NOTE: Gigabit Ethernet (1000 Mbps) is only supported in S0. The Intel® ICH9DO Southbridge integrated GbE controller is interfaced to an Intel® 82566DM Gigabit LAN connect device through the Gigabit LAN Connect Interface (GLCI). The GLCI is shared with the PCIe x1 port 6. The Intel® 82566DM connects the Intel® ICH9DO Southbridge integrated GbE controller to an external RJ-45 Ethernet LAN connector to provide GbE access.
PAGE 46
PCIE-Q350 PICMG 1.3 CPU Card Compliance with Advanced Configuration and Power Interface Compliance with PCI Power Management standards. ACPI register set and power down functionality supporting D0 & D3 states. Full wake-up support (APM and ACPI). Magic Packet wake-up enable with unique MAC address. Fragmented UDP checksum off load for package reassembly. Jumbo frames supported. 2.5.4.
PAGE 47
PCIE-Q350 PICMG 1.3 CPU Card Network Connection. Can support legacy ASF2.0. Shared SPI flash with system BIOS Integrated linear voltage regulator TCP/UDP checksum and segmentation offload Receive side scaling Dual TX and RX queues 802.1p and 802.1q 2.5.5 Intel® ICH9DO Low Pin Count (LPC) Interface The ICH9DO LPC interface complies with the LPC 1.1 specifications. The LPC bus from the ICH9DO is connected to the following components: BIOS chipset Super I/O chipset Trusted Platform Module (TPM) connector 2.
PAGE 48
PCIE-Q350 PICMG 1.3 CPU Card 2.5.7 Intel® ICH9DO PCIe x1 Bus The Intel® ICH9DO Southbridge chipset has six PCIe x1 lanes. The four PCIe lanes are interfaced through a PCIe edge connector at the bottom of the CPU card through a compatible half-size backplane to either four PCIe x1 expansion cards or one PCIe x4 expansion card on. One of the remaining PCIe x1 lanes is connected to an Intel® 82566DM GbE controller and the other PCIe x1 lane is connected to an Intel® 82573L GbE controller.
PAGE 49
PCIE-Q350 PICMG 1.3 CPU Card AHCI or RAID mode: One controller supports all six ports including, Port 0, Port 1, Port 2, Port 3, Port 4 and Port 5. In the AHCI or RAID mode, 3.0 Gbps data transfer speeds are supported. The SATA drive connectors are shown in Figure 2-11. Figure 2-11: SATA Drive Connectors 2.5.10 Intel® ICH9DO Serial Peripheral Interface (SPI) BIOS The 4-pin SPI is connected to an SPI BIOS chip. A licensed copy of AMI BIOS is preinstalled on the SPI BIOS chip.
PAGE 50
PCIE-Q350 PICMG 1.3 CPU Card devices can be connected to the PCIE-Q350. EHCI controllers facilitate data transfer speeds of 480 Mbps Port routing logic on the ICH9DO determines whether a UHCI or an EHCI controller controls a USB port. 2.5.11.2 PCIE-Q350 USB Implementation Only eight of the Intel® ICH9DO USB ports are implemented on the PCIE-Q350.
PAGE 51
PCIE-Q350 PICMG 1.3 CPU Card Figure 2-13: USB Edge connector 2.6 PCIE-Q350 PCIe Bus Components 2.6.1 PCIe Bus Overview The PCIE-Q350 has one PCIe x16 channel from the Intel® Q35 Northbridge and six PCIe x1 lanes from the Intel® ICH9DO Southbridge. The PCIe bus lanes are interfaced to the following devices.
PAGE 52
PCIE-Q350 PICMG 1.3 CPU Card Figure 2-14: PCIe x16 Edge connector 2.6.3 PCIe x1 Expansion Four of the six PCIe x1 expansion channels on the PCIE-Q350 are interfaced to four PCIe x1 connectors on a backplane through an edge connector on the bottom of the CPU card. The PCIe x1 edge connector is shown in Figure 2-15. Figure 2-15: PCIe x1 Edge connector (Four Lanes) 2.6.4 Intel® 82573L PCIe GbE Controller An RJ-45 Ethernet LAN connector is interfaced directly to an Intel® 82573L PCIe GbE controller.
PAGE 53
PCIE-Q350 PICMG 1.3 CPU Card physical layer (PHY) device with its own Memory Access Controller (MAC) and interfaced to the Intel® ICH9DO Southbridge through a PCIe x1 lane. The Intel® 82573L GbE controllers is shown in Figure 2-16 below. Figure 2-16: Intel® 82573L PCIe GbE Controller Some of the features of the Intel® 82573L are listed below: 2 Gbps peak bandwidth per direction PCI Express Rev 1.
PAGE 54
PCIE-Q350 PICMG 1.3 CPU Card insertion, stripping, and packet filtering for up to 4096 VLAN tags Boot ROM Preboot eXecution Environment (PXE) Flash interface support SDG 3.0,WfM 3.0 and PC2001 compliant Wake on LAN support 2.7 PCI Bus Components 2.7.1 PCI Bus Overview The PCI bus is connected to the components listed below: ITE IT8211 ATA controller chipset IT8209R PCI arbiter PCI edge connector The PCI bus complies with PCI Local Bus Specification, Revision 2.3 and supports 33MHz PCI operations. 2.7.
PAGE 55
PCIE-Q350 PICMG 1.3 CPU Card Figure 2-17: PCI Arbiter One of the PCI masters on the ITE IT8209 PCI arbiter is connected to the Intel® ICH9DO Southbridge. The remaining two are connected to the PCI edge connector to facilitate PCI expansion on the backplane. Some of the features of the ITE IT8209 PCI arbiter are listed below: Extended PCI Arbiter Input PCI Clock Clock Buffer 2.7.
PAGE 56
PCIE-Q350 PICMG 1.3 CPU Card 2.8 LPC Bus Components 2.8.1 LPC Bus Overview The LPC bus is connected to components listed below: TPM module connector Super I/O chipset 2.8.2 TPM Module A TPM connector on the PCIE-Q350 is interfaced to the Intel® ICH9DO Southbridge through the LPC bus. The TPM connector is shown in Figure 2-19 below. Figure 2-19: TPM Connector The Intel® ICH9DO Southbridge supports TPM version 1.1 and TPM version 1.2 devices for enhanced security. Three TPM are available from IEI.
PAGE 57
PCIE-Q350 PICMG 1.3 CPU Card 2.8.3 Super I/O chipset The ITE IT8718F Super I/O chipset is connected to the Intel® ICH9DO Southbridge through the LPC bus. ITE IT8718F Super I/O chipset is shown in Figure 2-20 below. Figure 2-20: ITE IT8718F Super I/O The ITE IT8718F is an LPC interface-based Super I/O device that comes with an integrated Environment Controller.
PAGE 58
PCIE-Q350 PICMG 1.3 CPU Card Some of the Super I/O features are described in more detail below: 2.8.3.1 Super I/O LPC Interface The LPC interface on the Super I/O complies with the Low Pin Count Specification Rev. 1.0. The LPC interface supports both LDRQ# and SERIRQ protocols as well as PCI PME# interfaces. 2.8.3.2 Super I/O 16C550 UARTs The onboard Super I/O has two integrated 16C550 UARTs that can support the following: Two standard serial ports (COM1 and COM2) IrDa 1.0 and ASKIR protocols 2.8.3.
PAGE 59
PCIE-Q350 PICMG 1.3 CPU Card Interrupt and polling modes supported Fast Gate A20 and Hardware Keyboard Reset 8-bit timer/counter The keyboard and mouse controller controller is interfaced to a keyboard and mouse connected to the backplane through the board-to-board connectors. 2.8.3.6 Super I/O GPIO Ports The Super I/O has 48 programmable GPIO ports of which 16 are implemented on the PCIE-Q350. The GPIO connector has 16 programmable bits, 8-bit input and 8-bit output. 2.8.3.
PAGE 60
PCIE-Q350 PICMG 1.3 CPU Card Figure 2-21: LAN Connections The first GbE controller, is an Intel® 82537L PCIe GbE controller and is the interface between the Intel® ICH9DO Southbridge controller and the LAN1 RJ-45 Ethernet connector. The second GbE controller is integrated on the Intel® ICH9DO Southbridge and interfaced to the LAN2 RJ-45 Ethernet LAN connector through an Intel® 82566DM Gigabit Platform LAN Connect device.
PAGE 61
PCIE-Q350 PICMG 1.3 CPU Card 2.10 Environmental and Power Specifications 2.10.1 System Monitoring Three thermal inputs on the PCIE-Q350 Super I/O Enhanced Hardware Monitor monitor the following temperatures: CPU Temperature System Temperature Five voltage inputs on the PCIE-Q350 Super I/O Enhanced Hardware Monitor monitors the following voltages: CPU Core +1.80V +3.30V +12.
PAGE 62
PCIE-Q350 PICMG 1.3 CPU Card A cooling fan and heat sink must be installed on the CPU. Thermal paste must be smeared on the lower side of the heat sink before it is mounted on the CPU. Heat sinks are also mounted on the Northbridge and Southbridge chipsets to ensure the operating temperature of these chips remain low. 2.10.3 Power Consumption Table 2-3 shows the power consumption parameters for the PCIE-Q350 running 3D Mark® 2001 SE330 with a 2.
PAGE 63
PCIE-Q350 PICMG 1.
PAGE 64
PCIE-Q350 PICMG 1.
PAGE 65
PCIE-Q350 PICMG 1.
PAGE 66
PCIE-Q350 PICMG 1.
PAGE 67
PCIE-Q350 PICMG 1.3 CPU Card 3.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the PCIE-Q350 may result in permanent damage to the PCIE-Q350 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the PCIE-Q350. Dry climates are especially susceptible to ESD.
PAGE 68
PCIE-Q350 PICMG 1.3 CPU Card 3.3 Unpacking Checklist NOTE: If some of the components listed in the checklist below are missing, please do not proceed with the installation. Contact the IEI reseller or vendor you purchased the PCIE-Q350 from or contact an IEI sales representative directly. To contact an IEI sales representative, please send an email to sales@iei.com.tw. 3.3.
PAGE 69
PCIE-Q350 PICMG 1.3 CPU Card 3 SATA power cables (P/N: 32100-088600-RS) 1 Mini jumper Pack 1 Quick Installation Guide 1 Utility CD 1 USB cable (P/N:CB-USB02-RS) Table 3-1: Package List Contents 3.
PAGE 70
PCIE-Q350 PICMG 1.
PAGE 71
PCIE-Q350 PICMG 1.
PAGE 72
PCIE-Q350 PICMG 1.3 CPU Card 4.1 Peripheral Interface Connectors Section 4.1.2 shows peripheral interface connector locations. Section 4.1.2 lists all the peripheral interface connectors seen in Section 4.1.2. 4.1.1 PCIE-Q350 Layout Figure 4-1 shows the on-board peripheral connectors, rear panel peripheral connectors and on-board jumpers. Figure 4-1: Connector and Jumper Locations 4.1.2 Peripheral Interface Connectors Table 4-1 shows a list of the peripheral interface connectors on the PCIE-Q350.
PAGE 73
PCIE-Q350 PICMG 1.
PAGE 74
PCIE-Q350 PICMG 1.3 CPU Card Connector Type Label Ethernet connector RJ-45 LAN1 Ethernet connector RJ-45 LAN2 USB connector USB port USB_1 USB connector USB port USB_2 VGA connector Female DB-15 VGA1 Table 4-2: Rear Panel Connectors 4.2 Internal Peripheral Connectors Internal peripheral connectors are found on the motherboard and are only accessible when the motherboard is outside of the chassis.
PAGE 75
PCIE-Q350 PICMG 1.3 CPU Card Figure 4-2: ATX Power Connector Location PIN NO.
PAGE 76
PCIE-Q350 PICMG 1.3 CPU Card 4.2.2 Audio Connector CN Label: AUDIO1 CN Type: 9-pin header (2x5) CN Location: See Figure 4-3 CN Pinouts: See Table 4-4 NOTE: The IEI® AC-KIT-883HD HDA audio kit is optional. If an IEI® AC-KIT-883HD HDA audio kit is required please contact the vendor or reseller the PCIE-Q350 was purchased from or contact and IEI® sales representative directly by sending an email to sales@iei.com.tw.
PAGE 77
PCIE-Q350 PICMG 1.3 CPU Card Figure 4-3: Audio Connector Location (9-pin) PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 SYNC 2 BITCLK 3 SDOUT 4 PCBEEP 5 SDIN 6 RST# 7 VCC 8 GND 9 +12V 10 N/C Table 4-4: Audio Connector Pinouts 4.2.
PAGE 78
PCIE-Q350 PICMG 1.3 CPU Card CN Location: See Figure 4-4 CN Pinouts: See Table 4-5 The digital input/output connector is managed through a Super I/O chip. The DIO connector pins are user programmable. To see details on how to program the DIO chip, please refer to Appendix B.
PAGE 79
PCIE-Q350 PICMG 1.3 CPU Card PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 Input 0 2 Output 0 3 Input 1 4 Output 1 5 Input 2 6 Output 2 7 Input 3 8 Output 3 9 Input 4 10 Output 4 11 Input 5 12 Output 5 13 Input 6 14 Output 6 15 Input 7 16 Output 7 17 GND 18 +5V Table 4-5: DIO Connector Connector Pinouts 4.2.
PAGE 80
PCIE-Q350 PICMG 1.3 CPU Card Figure 4-5: +12V Fan Connector Location PIN NO.
PAGE 81
PCIE-Q350 PICMG 1.3 CPU Card 4.2.5 Fan Connector, System (+12V) CN Label: SYS_FAN1 CN Type: 3-pin header CN Location: See Figure 4-6 CN Pinouts: See Table 4-7 The system cooling fan connector provides a 12V, 500mA current to a system cooling fan.. The connector has a "rotation" pin to get rotation signals from fans and notify the system so the system BIOS can recognize the fan speed. Please note that only specified fans can issue the rotation signals.
PAGE 82
PCIE-Q350 PICMG 1.3 CPU Card PIN NO. DESCRIPTION 1 GND 2 +12V 3 Rotation Signal Table 4-7: +12V Fan Connector Pinouts 4.2.6 Front Panel Connector (14-pin) CN Label: F_PANEL1 CN Type: 12-pin header (2x6) CN Location: See Figure 4-7 CN Pinouts: See Table 4-8 The front panel connector connects to external switches and indicators to monitor and controls the motherboard.
PAGE 83
PCIE-Q350 PICMG 1.
PAGE 84
PCIE-Q350 PICMG 1.3 CPU Card 4.2.7 Infrared Interface Connector (5-pin) CN Label: IR1 CN Type: 5-pin header (1x5) CN Location: See Figure 4-8 CN Pinouts: See Table 4-9 The infrared interface connector supports both Serial Infrared (SIR) and Amplitude Shift Key Infrared (ASKIR) interfaces.
PAGE 85
PCIE-Q350 PICMG 1.3 CPU Card PIN NO. DESCRIPTION 1 VCC 2 NC 3 IR-RX 4 GND 5 IR-TX Table 4-9: Infrared Connector Pinouts 4.2.8 Keyboard/Mouse Connector CN Label: CN22 CN Type: 6-pin header (1x6) CN Location: See Figure 4-9 CN Pinouts: See Table 4-10 The keyboard and mouse connector can be connected to a standard PS/2 cable or PS/2 Y-cable to add keyboard and mouse functionality to the system.
PAGE 86
PCIE-Q350 PICMG 1.
PAGE 87
PCIE-Q350 PICMG 1.3 CPU Card PIN NO. DESCRIPTION 1 +5V KB DATA 2 MS DATA 3 MS CLK 4 KB DATA 5 KB CLK 6 GROUND Table 4-10: Keyboard/Mouse Connector Pinouts 4.2.9 SATA Drive Connectors CN Label: SATA1, SATA2, SATA3, SATA4, SATA5. and SATA6 CN Type: 7-pin SATA drive connectors CN Location: See Figure 4-10 CN Pinouts: See Table 4-11 The six SATA drive connectors are each connected to second generation SATA drives. Second generation SATA drives transfer data at speeds as high as 300 Mbps.
PAGE 88
PCIE-Q350 PICMG 1.3 CPU Card Figure 4-10: SATA Drive Connector Locations PIN NO.
PAGE 89
PCIE-Q350 PICMG 1.3 CPU Card 4.2.10 Serial Port Connector (COM1, COM 2) CN Label: COM1 and COM2 CN Type: 10-pin header (2x5) CN Location: See Figure 4-11 CN Pinouts: See Table 4-12 The 10-pin serial port connector provides a second RS-232 serial communications channel. The COM 2 serial port connector can be connected to external RS-232 serial port devices.
PAGE 90
PCIE-Q350 PICMG 1.3 CPU Card PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 Data Carrier Direct (DCD) 2 Data Set Ready (DSR) 3 Receive Data (RXD) 4 Request To Send (RTS) 5 Transmit Data (TXD) 6 Clear To Send (CTS) 7 Data Terminal Ready (DTR) 8 Ring Indicator (RI) 9 Ground (GND) 10 N/C Table 4-12: Serial Connector Pinouts 4.2.
PAGE 91
PCIE-Q350 PICMG 1.3 CPU Card Figure 4-12: TPM Connector Pinout Locations PIN NO. DESCRIPTION PIN NO.
PAGE 92
PCIE-Q350 PICMG 1.3 CPU Card 17 GND1 18 GLKRUN# 19 LPCPD# 20 LDRQ# Table 4-13: TPM Connector Pinouts 4.2.12 SDVO Control Connector CN Label: SDVO1 CN Type: 3-pin header (1x3) CN Location: See Figure 4-13 CN Pinouts: See Table 4-14 If an SDVO graphics card is installed on the PCIe x16 expansion slot on the backplane, the 1x3 pin Serial Digital Video Output (SDVO) control connector must be connected to a corresponding SDVO control connector on a compatible IEI backplane.
PAGE 93
PCIE-Q350 PICMG 1.3 CPU Card Figure 4-13:SDVO Connector Pinout Locations PIN NO.
PAGE 94
PCIE-Q350 PICMG 1.3 CPU Card 4.2.13 USB Connectors (Internal) CN Label: USB1, USB2 and USB3 CN Type: 8-pin header (2x4) CN Location: See Figure 4-14 CN Pinouts: See Table 4-15 The 2x4 USB pin connectors each provide connectivity to two USB 1.1 or two USB 2.0 ports. Each USB connector can support two USB devices.. Additional external USB ports are found on the rear panel. The USB ports are used for I/O bus expansion.
PAGE 95
PCIE-Q350 PICMG 1.3 CPU Card PIN NO. DESCRIPTION PIN NO. DESCRIPTION 1 VCC 2 GND 3 DATAN- 4 DATAM+ 5 DATAN+ 6 DATAM- 7 GND 8 VCC Table 4-15: USB Port Connector Pinouts 4.3 External Peripheral Interface Connector Panel Figure 4-15 shows the PCIE-Q350 external peripheral interface connector (EPIC) panel. The PCIE-Q350 EPIC panel consists of the following: 1 x DVI connector 1 x PS/2 connector 2 x RJ-45 LAN connectors Figure 4-15: PCIE-Q350 External Peripheral Interface Connector 4.3.
PAGE 96
PCIE-Q350 PICMG 1.3 CPU Card connector indicating the status of LAN. The pin assignments are listed in the following table: PIN DESCRIPTION PIN DESCRIPTION 1 TXA+ 5 TXC- 2 TXA- 6 TXB- 3 TXB+ 7 TXD+ 4 TXC+ 8 TXD- Table 4-16: LAN Pinouts Figure 4-16: RJ-45 Ethernet Connector The RJ-45 Ethernet connector has two status LEDs, one green and one yellow. The green LED indicates activity on the port and the yellow LED indicates the port is linked. See Table 4-17.
PAGE 97
PCIE-Q350 PICMG 1.3 CPU Card CN Pinouts: See Table 4-18 The PCIE-Q350 has four external USB 2.0 ports. The ports connect to both USB 2.0 and USB 1.1 devices. PIN NO. DESCRIPTION 1 GND 2 USB_P 4 USB_N 4 USB_5V Table 4-18: USB Port Pinouts 4.3.3 VGA Connector CN Label: VGA1 CN Type: 15-pin Female CN Location: See Figure 4-15 CN Pinouts: See Figure 4-17 and Table 4-19 The PCIE-Q350 has a single 15-pin female connector for connectivity to standard display devices.
PAGE 98
PCIE-Q350 PICMG 1.
PAGE 99
PCIE-Q350 PICMG 1.
PAGE 100
PCIE-Q350 PICMG 1.3 CPU Card 5.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the PCIE-Q350 may result in permanent damage to the PCIE-Q350 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the PCIE-Q350. Dry climates are especially susceptible to ESD.
PAGE 101
PCIE-Q350 PICMG 1.3 CPU Card 5.2 Installation Considerations NOTE: The following installation notices and installation considerations should be read and understood before the PCIE-Q350 is installed. All installation notices pertaining to the installation of the PCIE-Q350 should be strictly adhered to. Failing to adhere to these precautions may lead to severe damage of the PCIE-Q350 and injury to the person installing the motherboard. 5.2.
PAGE 102
PCIE-Q350 PICMG 1.3 CPU Card o When working with the PCIE-Q350, make sure that it is disconnected from all power supplies and that no electricity is being fed into the system. Before and during the installation of the PCIE-Q350 DO NOT: Remove any of the stickers on the PCB board. These stickers are required for warranty validation. Use the product before verifying all the cables and power connectors are properly connected.
PAGE 103
PCIE-Q350 PICMG 1.3 CPU Card o LAN 5.3 Unpacking 5.3.1 Unpacking Precautions When the PCIE-Q350 is unpacked, please do the following: Follow the anti-static precautions outlined in Section 5.1. Make sure the packing box is facing upwards so the PCIE-Q350 does not fall out of the box. Make sure all the components in the checklist shown in Chapter 3 are present. NOTE: If some of the components listed in the checklist in Chapter 3 are missing, please do not proceed with the installation.
PAGE 104
PCIE-Q350 PICMG 1.3 CPU Card The CPU, CPU cooling kit and DIMM are the most critical components of the PCIE-Q350. If one of these components is not installed the PCIE-Q350 cannot run. 5.4.
PAGE 105
PCIE-Q350 PICMG 1.3 CPU Card Figure 5-1: Intel® LGA775 Socket To install a socket LGA775 CPU onto the PCIE-Q350, follow the steps below: WARNING: When handling the CPU, only hold it on the sides. DO NOT touch the pins at the bottom of the CPU. Step 1: Remove the protective cover. Remove the black protective cover by prying it off the load plate. To remove the protective cover, locate the “REMOVE” sign and use your fingernail to pry the protective cover off. See Figure 5-2.
PAGE 106
PCIE-Q350 PICMG 1.3 CPU Card position. Then rotate the load plate towards the opposite direction. See Figure 5-3. Figure 5-3: Open the CPU Socket Load Plate Step 3: Inspect the CPU socket Make sure there are no bent pins and make sure the socket contacts are free of foreign material. If any debris is found, remove it with compressed air. Step 4: Orientate the CPU properly. Make sure the IHS (Integrated Heat Sink) side is facing upward. Step 5: Correctly position the CPU.
PAGE 107
PCIE-Q350 PICMG 1.3 CPU Card Figure 5-4: Insert the Socket LGA775 CPU Step 8: Close the CPU socket. Close the load plate and engage the load lever by pushing it back to its original position. Secure the load lever under the retention tab on the side of CPU socket. Step 9: Connect the CPU 12V cable to the 12After the cooling kit is installed connect the CPU cable to the CPU 12V power connector. Step 0: 5.4.
PAGE 108
PCIE-Q350 PICMG 1.3 CPU Card Figure 5-5: IEI CF-520 Cooling Kit An IEI Socket LGA775 CPU cooling kit shown in Figure 5-5 can be purchased separately. The cooling kit comprises a CPU heat sink and a cooling fan. WARNING: Do not wipe off (accidentally or otherwise) the pre-sprayed layer of thermal paste on the bottom of the [Fan model#] heat sink. The thermal paste between the CPU and the heat sink is important for optimum heat dissipation. To install the cooling kit follow the instructions below.
PAGE 109
PCIE-Q350 PICMG 1.3 CPU Card holes. (See Figure 5-6) Figure 5-6: Securing the Heat sink to the PCB Board Step 5: Tighten the screws. Use a screwdriver to tighten the four screws. Tighten each nut a few turns at a time and do not over-tighten the screws. Step 6: Connect the fan cable. Connect the cooling kit fan cable to the fan connector on the PCIE-Q350. Carefully route the cable and avoid heat generating chips and fan blades. Step 0: 5.4.
PAGE 110
PCIE-Q350 PICMG 1.3 CPU Card 5.4.3.1 DIMM Purchasing Guidelines WARNING: Only use DDR2 DIMMs. If DDR DIMMs are used the system may be irreparably damaged. When purchasing the DDR2 DIMM, please follow the guidelines below: ONLY purchase DDR2 DIMM Have a frequency of 667 MHz or 800 MHz Have a maximum capacity of 2.0 GB If more than one DDR2 DIMM is being installed in the system, please purchase DIMM that have the same capacity and operating frequency. 5.4.3.
PAGE 111
PCIE-Q350 PICMG 1.3 CPU Card On the PCIE-Q350, each channel is interfaced to two 240-pin DIMM sockets in the following order (see Figure 5-7 above): Channel A: DIMM1 and DIMM2 Channel B: DIMM3 and DIMM4 When populating the DDR2 DIMM sockets, populate them in the following order to optimize the memory performance: Step 1: DIMM1. Install the first DDR2 DIMM into the DIMM1 DDR2 DIMM socket. Step 2: DIMM3. Install the second DDR2 DIMM into the DIMM3 DDR2 DIMM socket. Step 3: DIMM2.
PAGE 112
PCIE-Q350 PICMG 1.3 CPU Card Figure 5-8: Installing a DIMM Step 3: Insert the DIMM. Once properly aligned, the DIMM can be inserted into the socket. As the DIMM is inserted, the white handles on the side of the socket will close automatically and secure the DIMM to the socket. See Figure 5-8. Step 4: Removing a DIMM. To remove a DIMM, push both handles outward. The memory module is ejected by a mechanism in the socket. Step 0: 5.
PAGE 113
PCIE-Q350 PICMG 1.3 CPU Card Before the PCIE-Q350 is installed in the system, the jumpers must be set in accordance with the desired configuration. The jumpers on the PCIE-Q350 are listed in Table 5-1. Description Label Type Clear CMOS J_CMOS1 3-pin header Table 5-1: Jumpers 5.5.
PAGE 114
PCIE-Q350 PICMG 1.3 CPU Card Jumper Select Description Short 1 - 2 Keep CMOS Setup Short 2 - 3 Clear CMOS Setup Default Table 5-2: Clear CMOS Jumper Settings The location of the clear CMOS jumper is shown in Figure 5-9 below.
PAGE 115
PCIE-Q350 PICMG 1.3 CPU Card 5.6 Chassis Installation 5.6.1 Airflow WARNING: Airflow is critical to the cooling of the CPU and other onboard components. The chassis in which the PCIE-Q350 must have air vents to allow cool air to move into the system and hot air to move out. The PCIE-Q350 must be installed in a chassis with ventilation holes on the sides allowing airflow to travel through the heat sink surface.
PAGE 116
PCIE-Q350 PICMG 1.3 CPU Card NOTE: IEI has a wide range of backplanes available. Please contact your PCIE-Q350 vendor, reseller or an IEI sales representative at sales@iei.com.tw or visit the IEI website (http://www.ieiworld.com.tw) to find out more about the available chassis. 5.6.3 CPU Card Installation To install the PCIE-Q350 CPU card onto the backplane, carefully align the CPU card interface connectors with the corresponding socket on the backplane. See Figure 5-10.
PAGE 117
PCIE-Q350 PICMG 1.3 CPU Card Quantity Type 1 Dual RS-232 cable 1 KB/MS cable with mini DIN 1 PS/2 Y-cable 6 SATA drive cables 3 SATA drive power cables 1 USB cable Table 5-3: IEI Provided Cables Separately purchased optional IEI items that can be installed are listed below: Audio kit TPM Module For more details about the items listed above, please refer to Chapter 3. Installation of the accessories listed above are described in detail below. 5.7.
PAGE 118
PCIE-Q350 PICMG 1.3 CPU Card Figure 5-11: Audio Kit Connection Step 3: Connect the audio devices. Connect the speakers and the subwoofer to the appropriate audio jack shown in Figure 5-11. 5.7.3 Dual RS-232 Cable Connection The dual RS-232 cable consists of two connectors attached to two independent cables. Each cable is then attached to a D-sub 9 male connector that is mounted onto a bracket. To install the dual RS-232 cable, please follow the steps below. Step 1: Locate the connectors.
PAGE 119
PCIE-Q350 PICMG 1.3 CPU Card Figure 5-12: Dual RS-232 Cable Installation Step 3: Secure the bracket. The dual RS-232 connector has two D-sub 9 male connectors secured on a bracket. To secure the bracket to the chassis please refer to the reference material that came with the chassisStep 0: 5.7.4 SATA Drive Connection The PCIE-Q350 is shipped with two SATA drive cables and one SATA drive power cable. To connect the SATA drives to the connectors, please follow the steps below. Step 1: Locate the connectors.
PAGE 120
PCIE-Q350 PICMG 1.3 CPU Card Figure 5-13: SATA Drive Cable Connection Step 3: Connect the cable to the SATA disk. Connect the connector on the other end of the cable to the connector at the back of the SATA drive. See Figure 5-14. Step 4: Connect the SATA power cable. Connect the SATA power connector to the back of the SATA drive. See Figure 5-14. Figure 5-14: SATA Power Drive Connection 5.7.5 USB Cable (Dual Port) The PCIE-Q350 is shipped with a dual port USB 2.0 cable.
PAGE 121
PCIE-Q350 PICMG 1.3 CPU Card Step 1: Locate the connectors. The locations of the USB connectors are shown in Chapter 3. WARNING: If the USB pins are not properly aligned, the USB device can burn out. Step 2: Align the connectors. The cable has two connectors. Correctly align pin 1on each cable connector with pin 1 on the PCIE-Q350 USB connector. Step 3: Insert the cable connectors.
PAGE 122
PCIE-Q350 PICMG 1.3 CPU Card 5.8 Installing Devices on a PICMG 1.3 Backplane Compatible PICMG 1.3 backplanes can accommodate the following devices: PCIe x16 graphics cards SDVO device graphics card PCIe x4 expansion cards PCIe x1 expansion cards PCI expansion cards 5.8.1 PCIe x16 Graphics Card Installation To install a PCIe x16 graphics card onto a backplane, please do the following: Step 1: Find the PCIe x16 socket on the backplane.
PAGE 123
PCIE-Q350 PICMG 1.3 CPU Card 5.8.2 SDVO Device Installation To install an SDVO device on the backplane, please follow the steps below: Step 1: Make sure the PCIE-Q350 is properly installed on the backplane Step 2: Locate the PCIe x16 graphics card slot Step 3: Insert the SDVO device into the PCIe x16 graphics card slot Step 4: Connect the PCIE-Q350 SDVO control connector to the corresponding connector on the backplane. Step 0: 5.
PAGE 124
PCIE-Q350 PICMG 1.3 CPU Card the RJ-45 connectors on the PCIE-Q350. See Figure 5-17. Figure 5-17: LAN Connection Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cable RJ-45 connector into the onboard RJ-45 connector. Step 0: 5.9.2 PS/2 Y-Cable Connection NOTE: Before installing the PS/2 Y-cable connector, make sure the keyboard and mouse cable with the mini DIN connector has been properly installed and that the DIN connector is correctly mounted on the external panel.
PAGE 125
PCIE-Q350 PICMG 1.3 CPU Card Step 1: Locate the dual PS/2 connector. The location of the PS/2 connector is shown in Chapter 3. Step 2: Insert the keyboard/mouse connector. Insert the PS/2 connector on the end of the PS/2 y-cable into the external PS/2 connector. See Figure 5-18. Figure 5-18: PS/2 Keyboard/Mouse Connector Step 3: Connect the keyboard and mouse. Connect the keyboard and mouse to the appropriate connector.
PAGE 126
PCIE-Q350 PICMG 1.3 CPU Card in Chapter 4. Step 2: Align the connectors. Align the USB device connector with one of the connectors on the PCIE-Q350. See Figure 5-19. Figure 5-19: USB Device Connection Step 3: Insert the device connector. Once aligned, gently insert the USB device connector into the onboard connector. Step 0: 5.9.4 VGA Monitor Connection The PCIE-Q350 has a single female DB-15 connector on the external peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor.
PAGE 127
PCIE-Q350 PICMG 1.3 CPU Card Step 3: Insert the VGA connector. Once the connectors are properly aligned with the insert the male connector from the VGA screen into the female connector on the PCIE-Q350. See Figure 5-20. Figure 5-20: VGA Connector Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA monitor to the external interface by tightening the two retention screws on either side of the connector.
PAGE 128
PCIE-Q350 PICMG 1.
PAGE 129
PCIE-Q350 PICMG 1.3 CPU Card 6.1 Introduction A licensed copy of AMI BIOS is preprogrammed into the ROM BIOS. The BIOS setup program allows users to modify the basic system configuration. This chapter describes how to access the BIOS setup program and the configuration options that may be changed. 6.1.1 Starting Setup The AMI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways. 1. Press the DELETE key as soon as the system is turned on or 2.
PAGE 130
PCIE-Q350 PICMG 1.3 CPU Card F1 key General help, only for Status Page Setup Menu and Option Page Setup Menu F2 /F3 key Change color from total 3 colors. F2 to select color forward. F10 key Save all the CMOS changes, only for Main Menu Table 6-1: BIOS Navigation Keys 6.1.3 Getting Help When F1 is pressed a small help window describing the appropriate keys to use and the possible selections for the highlighted item appears. To exit the Help Window press ESC or the F1 key again. 6.1.
PAGE 131
PCIE-Q350 PICMG 1.3 CPU Card 6.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset System Overview ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ AMIBIOS Version :08.00.15 Build Date :03/25/10 ID: :E128MR38 Processor Type Speed Count :Intel(R) Core(TM)2 CPU :2133MHz :1 Use [ENTER], [TAB] or [SHIFT-TAB] to select a field.
PAGE 132
PCIE-Q350 PICMG 1.3 CPU Card o Size: Lists memory size The System Overview field also has two user configurable fields: System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds. System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year. 6.
PAGE 133
PCIE-Q350 PICMG 1.
PAGE 134
PCIE-Q350 PICMG 1.3 CPU Card Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Configure Advanced CPU Settings Module Version: 3F.12 ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Manufacturer :Intel Intel(R) Core(TM)2 CPU 6420 @2.13GHz Frequency :2.13GHz FSB Speed :1068MHz Cache L1 : 64KB Cache L2 : 4096KB Ratio Actual Value : 8 ↑ ↓ Enter F1 F10 ESC Exit Select Screen Select Item Go to SubScreen General Help Save and Exit Exit v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
PAGE 135
PCIE-Q350 PICMG 1.
PAGE 136
PCIE-Q350 PICMG 1.3 CPU Card AHCI The SATA drive connected to the nth SATA drive port is specified as a normal SATA drive. IDE Master and IDE Slave When entering setup, BIOS auto detects the presence of IDE devices. BIOS displays the status of the auto detected IDE devices.
PAGE 137
PCIE-Q350 PICMG 1.3 CPU Card Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Primary IDE Master ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Device :Not Detected Type LBA/Large Mode Block (Multi-Sector Transfer) PIO Mode DMA Mode S.M.A.R.T. 32Bit Data Transfer [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Enabled] Exit Select the type of device connected to the system ↑ ↓ Enter F1 F10 ESC Select Screen Select Item Go to SubScreen General Help Save and Exit Exit v02.
PAGE 138
PCIE-Q350 PICMG 1.3 CPU Card Reporting Technology protocol is supported. 32Bit Data Transfer: Enables 32-bit data transfer. Type [Auto] Use the Type BIOS option select the type of device the AMIBIOS attempts to boot from after the Power-On Self-Test (POST) is complete. BIOS is prevented from searching for an IDE disk Not Installed drive on the specified channel. Auto DEFAULT The BIOS auto detects the IDE disk drive type attached to the specified channel.
PAGE 139
PCIE-Q350 PICMG 1.3 CPU Card BIOS is prevented from using the LBA mode control on Disabled the specified channel. Auto DEFAULT BIOS auto detects the LBA mode control on the specified channel. Block (Multi Sector Transfer) [Auto] Use the Block (Multi Sector Transfer) to disable or enable BIOS to auto detect if the device supports multi-sector transfers. BIOS is prevented from using Multi-Sector Transfer on the Disabled specified channel. The data to and from the device occurs one sector at a time.
PAGE 140
PCIE-Q350 PICMG 1.3 CPU Card PIO mode 4 selected with a maximum transfer rate of 16.6MBps 4 (This setting generally works with all hard disk drives manufactured after 1999. For other disk drives, such as IDE CD-ROM drives, check the specifications of the drive.) DMA Mode [Auto] Use the DMA Mode BIOS selection to adjust the DMA mode options. Auto DEFAULT BIOS auto detects the DMA mode. Use this value if the IDE disk drive support cannot be determined. S.M.A.R.T [Auto] Use the S.M.A.R.
PAGE 141
PCIE-Q350 PICMG 1.3 CPU Card 6.3.3 Super IO Configuration Use the Super IO Configuration menu (BIOS Menu 6) to set or change the configurations for the FDD controllers, parallel ports and serial ports.
PAGE 142
PCIE-Q350 PICMG 1.3 CPU Card Serial Port1 Mode [Normal] Use the Serial Port1 Mode option to select the transmitting and receiving mode for the first serial port. Normal DEFAULT Serial Port 1 mode is normal IrDA Serial Port 1 mode is IrDA ASK IR Serial Port 1 mode is ASK IR Serial Port2 Address [2F8/IRQ3] Use the Serial Port2 Address option to select the Serial Port 2 base address.
PAGE 143
PCIE-Q350 PICMG 1.3 CPU Card 6.3.4 Hardware Health Configuration The Hardware Health Configuration menu (BIOS Menu 7) shows the operating temperature, fan speeds and system voltages. Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Exit Hardware Health Event Monitoring ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ CPU_FAN Mode Setting [Full On Mode] ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ CPU Temperature :33ºC/91ºF System Temperature #1 :41ºC/105ºF CPU FAN Speed SYS FAN Speed :1967 RPM :N/A CPU Core DDR2 1.
PAGE 144
PCIE-Q350 PICMG 1.3 CPU Card When the CPU FAN Mode Setting option is in the Automatic Mode, the following parameters can be set. CPU Temp. Limit of OFF CPU Temp. Limit of Start CPU Fan Start PWM Slope PWM 1 When the CPU FAN Mode Setting option is in the PWM Manual Mode, the following parameters can be set. CPU Fan PWM control CPU Temp. Limit of OFF [000] WARNING: Setting this value too high may cause the fan to stop when the CPU is at a high temperature and therefore cause the system to be damaged.
PAGE 145
PCIE-Q350 PICMG 1.3 CPU Card CPU Temp. Limit of Start [020] WARNING: Setting this value too high may cause the fan to start only when the CPU is at a high temperature and therefore cause the system to be damaged. The CPU Temp. Limit of Start option can only be set if the CPU FAN Mode Setting option is set to Automatic Mode. Use the CPU Temp. Limit of Start option to select the CPU temperature at which the cooling fan should automatically turn on.
PAGE 146
PCIE-Q350 PICMG 1.3 CPU Card Slope PWM 1 [1 PWM] The Slope PWM 1 option can only be set if the CPU FAN Mode Setting option is set to Automatic Mode. Use the Slope PWM 1 option to select the linear rate at which the PWM mode increases with respect to an increase in temperature. A list of available options is shown below: 0 PWM 1 PWM 2 PWM 4 PWM 8 PWM 16 PWM 32 PWM 64 PWM The following system parameters and values are shown.
PAGE 147
PCIE-Q350 PICMG 1.3 CPU Card 6.3.5 ICP Power Configuration Use the ICP Power Configuration menu (BIOS Menu 8) to setup ACPI configuration and power configuration. Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security > ACPI Configuration > Power Configuration Chipset Exit Section for Advanced ACPI Configuration Select Screen ↑ ↓ Select Item Enter Go to SubScreen F1 General Help F10 Save and Exit ESC Exit v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
PAGE 148
PCIE-Q350 PICMG 1.3 CPU Card Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset ACPI Settings ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Suspend mode [S1 (POS)] Exit Select the ACPI state used for System suspend ↑ ↓ Enter F1 F10 ESC Select Screen Select Item Go to SubScreen General Help Save and Exit Exit v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
PAGE 149
PCIE-Q350 PICMG 1.3 CPU Card Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Power Configuration ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Restore on AC Power Loss [Last State] Advanced Resume Event Controls Resume On KeyBoard/Mouse Resume On PCI-Express WAKE# Exit Power Off Power On Last State [Disabled] [Enabled] ↑ ↓ Enter F1 F10 ESC Select Screen Select Item Go to SubScreen General Help Save and Exit Exit v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
PAGE 150
PCIE-Q350 PICMG 1.3 CPU Card KeyBoard Resume On Wake event generated by activity on the mouse Mouse Wake event generated by activity on the keyboard or Enabled mouse Resume on PCI-Express WAKE# [Enabled] The Resume on PCI-Express WAKE# BIOS option specifies if the system is roused from a suspended or standby state when there is activity on the PCI-Express bus. Enabled DEFAULT Disabled Wake event generated by PCI-Express activity Wake event not generated by PCI-Express activity 6.3.
PAGE 151
PCIE-Q350 PICMG 1.3 CPU Card Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset AHCI Settings ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ > AHCI Port0 [Not Detected] > AHCI Port1 [Not Detected] > AHCI Port2 [Not Detected] > AHCI Port3 [Not Detected] > AHCI Port4 [Not Detected] > AHCI Port5 [Not Detected] Exit Some SATA CD/DVD in AHCI mode need to wait ready longer ↑ ↓ Enter F1 F10 ESC Select Screen Select Item Go to SubScreen General Help Save and Exit Exit v02.
PAGE 152
PCIE-Q350 PICMG 1.3 CPU Card Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset AHCI Port0 ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Device :Not Detected ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ SATA Port0 [Auto] S.M.A.R.T. [Enabled] Exit Select the type of device connected to the system ↑ ↓ Enter F1 F10 ESC Select Screen Select Item Go to SubScreen General Help Save and Exit Exit v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
PAGE 153
PCIE-Q350 PICMG 1.3 CPU Card 6.3.7 Intel AMT Configuration Use the Intel AMT menu (BIOS Menu 13) to enable the system to be managed through the Intel® Active Management Technology (AMT) interface. Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Configure Intel AMT Parameters ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Intel AMT Support [Disabled] Exit Disabled Enabled > ME Subsystem Configuration Select Screen ↑ ↓ Select Item Enter Go to SubScreen F1 General Help F10 Save and Exit ESC Exit v02.
PAGE 154
PCIE-Q350 PICMG 1.3 CPU Card Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Exit ME Subsystem Configuration ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ BootBlock HECI Message [Enabled] HECI Message [Enabled] End of Post S5 HECI Message [Enabled] ME HECI Configuration ME-HECI ME-IDER ME-KT [Enabled] [Disabled] [Disabled] ↑ ↓ Enter F1 F10 ESC Select Screen Select Item Go to SubScreen General Help Save and Exit Exit v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
PAGE 155
PCIE-Q350 PICMG 1.3 CPU Card HECI bus cannot rouse system from an S5 state Disabled Enabled DEFAULT HECI bus can rouse system from an S5 state ME-HECI [Enabled] This option is not user configurable. ME-IDER [Disabled] Use the ME-IDER option to enable or disable the IDE-Redirection (IDER) protocol to enable the Intel® AMT enabled PCIE-Q350 to boot from an OS image, floppy, CD or a DVD device.
PAGE 156
PCIE-Q350 PICMG 1.3 CPU Card Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Configure Remote Access type and parameters ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Remote Access [Disabled] Exit Select Remote Access type. Select Screen ↑ ↓ Select Item Enter Go to SubScreen F1 General Help F10 Save and Exit ESC Exit v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
PAGE 157
PCIE-Q350 PICMG 1.3 CPU Card COM1 DEFAULT COM2 System is remotely accessed through COM1 System is remotely accessed through COM2 NOTE: Make sure the selected COM port is enabled through the Super I/O configuration menu. Base Address, IRQ [3F8h,4] The Base Address, IRQ option cannot be configured and only shows the interrupt address of the serial port listed above. Serial Port Mode [115200 8,n,1] Use the Serial Port Mode option to select baud rate through which the console redirection is made.
PAGE 158
PCIE-Q350 PICMG 1.3 CPU Card Redirection is active during POST and during Boot Boot Loader Loader Always DEFAULT Redirection is always active (Some OSes may not work if set to Always) Terminal Type [ANSI] Use the Terminal Type BIOS option to specify the remote terminal type. ANSI DEFAULT The target terminal type is ANSI VT100 The target terminal type is VT100 VT-UTF8 The target terminal type is VT-UTF8 6.3.
PAGE 159
PCIE-Q350 PICMG 1.3 CPU Card TCG/TPM Support [No] Use the TCG/TPM Support option to configure support for the TPM. No DEFAULT TPM support is disabled. TPM support is enabled. Yes 6.3.10 USB Configuration Use the USB Configuration menu (BIOS Menu 17) to read USB configuration information and configure the USB settings. Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset USB Configuration ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Module Version – 2.24.3-13.
PAGE 160
PCIE-Q350 PICMG 1.3 CPU Card Legacy USB Support [Enabled] Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support. Normally if this option is not enabled, any attached USB mouse or USB keyboard does not become available until a USB compatible operating system is fully booted with all USB drivers loaded. When this option is enabled, any attached USB mouse or USB keyboard can control the system even when there is no USB driver loaded onto the system.
PAGE 161
PCIE-Q350 PICMG 1.
PAGE 162
PCIE-Q350 PICMG 1.3 CPU Card The specified IRQ is reserved for use by Legacy ISA Reserved devices Available IRQ addresses are: IRQ3 IRQ4 IRQ5 IRQ7 IRQ9 IRQ10 IRQ 11 IRQ 14 IRQ 15 DMA Channel# [Available] Use the DMA Channel# option to assign a specific DMA channel to a particular PCI/PnP device.
PAGE 163
PCIE-Q350 PICMG 1.3 CPU Card Reserved Memory Size [Disabled] Use the Reserved Memory Size BIOS option to specify the amount of memory that should be reserved for legacy ISA devices. Disabled DEFAULT No memory block reserved for legacy ISA devices 16K 16KB reserved for legacy ISA devices 32K 32KB reserved for legacy ISA devices 64K 54KB reserved for legacy ISA devices 6.5 Boot Use the Boot menu (BIOS Menu 19) to configure system boot options.
PAGE 164
PCIE-Q350 PICMG 1.3 CPU Card Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Boot Settings Configuration ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Quick Boot [Enabled] Quiet Boot [Enabled] AddOn ROM Display Mode [Force BIOS] Bootup Num-Lock [On] GbE LAN Boot (82566) [Disabled] Boot from LAN Support (82573L) [Disabled] Exit Allows BIOS to skip certain tests while booting. This will decrease the time needed to boot the system.
PAGE 165
PCIE-Q350 PICMG 1.3 CPU Card Force BIOS DEFAULT Allows the computer system to force a third party BIOS to display during system boot. Allows the computer system to display the Keep Current information during system boot. Bootup Num-Lock [On] Use the Bootup Num-Lock BIOS option to specify if the number lock setting must be modified during boot up. Does not enable the keyboard Number Lock automatically.
PAGE 166
PCIE-Q350 PICMG 1.3 CPU Card GbE LAN Boot (82566) [Disabled] Use the GbE LAN Boot (82566) option to enable the Intel® 82566 GbE controller to boot the system. Disabled DEFAULT Cannot be booted from a remote system through the Intel® 82566 GbE controller Can be booted from a remote system through the Enabled Intel® 82566 GbE controller Boot From LAN Support (82573L) [Disabled] Use the BOOT From LAN Support (82573L) option to enable the Intel® 82573L PCIe GbE controller to boot the system.
PAGE 167
PCIE-Q350 PICMG 1.3 CPU Card 6.6 Security Use the Security menu (BIOS Menu 21) to set system and user passwords. Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Exit Security Settings ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Supervisor Password :Not Installed User Password :Not Installed Change Supervisor Password Change User Password Select Screen ↑ ↓ Select Item Enter Go to SubScreen F1 General Help F10 Save and Exit ESC Exit v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
PAGE 168
PCIE-Q350 PICMG 1.3 CPU Card 6.7 Chipset Use the Chipset menu to access the NorthBridge and SouthBridge configuration menus WARNING: Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction. Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Advanced Chipset Settings ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ WARNING: Setting wrong values in below section may cause system to malfunction. Exit Configure North Bridge features.
PAGE 169
PCIE-Q350 PICMG 1.3 CPU Card 6.7.1 North Bridge Configuration Use the North Bridge Configuration menu (BIOS Menu 23) to configure the Northbridge chipset settings.
PAGE 170
PCIE-Q350 PICMG 1.3 CPU Card Disabled DEFAULT Memory is not reserved for ISA expansion cards Between 15 MB and 16 MB of memory is reserved 15 MB–16 MB for ISA expansion cards Initiate Graphic Adapter [PEG/PCI] Use the Initiate Graphic Adapter option to select the graphics controller used as the primary boot device. Select either an integrated graphics controller (IGD) or a combination of PCI graphics controller, a PCI express (PEG) controller or an IGD.
PAGE 171
PCIE-Q350 PICMG 1.3 CPU Card 6.7.2 South Bridge Configuration Use the South Bridge Configuration menu (BIOS Menu 24) to configure the Southbridge chipset. Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Southbridge Configuration ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ HAD Controller [Disabled] ASF Support [Enabled] Spread Spectrum [Disabled] Exit Enabled Disabled Select Screen ↑ ↓ Select Item Enter Go to SubScreen F1 General Help F10 Save and Exit ESC Exit v02.
PAGE 172
PCIE-Q350 PICMG 1.3 CPU Card The system will not communicate with a remote Disabled management server. Enabled DEFAULT The Alert Standard Format (ASF) controller is activated and can communicate with a remote management server. Spread Spectrum [Disabled] Use the Spread Spectrum option to reduce the EMI. Excess EMI is generated when the system clock generator pulses have extreme values.
PAGE 173
PCIE-Q350 PICMG 1.3 CPU Card 6.8 Exit Use the Exit menu (BIOS Menu 25) to load default BIOS values, optimal failsafe values and to save configuration changes. Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Exit Options ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Save Changes and Exit Discard Changes and Exit Discard Changes Load Optimal Defaults Load Failsafe Defaults Exit Exit Exit system setup after saving the changes.
PAGE 174
PCIE-Q350 PICMG 1.3 CPU Card Load Optimal Defaults Use the Load Optimal Defaults option to load the optimal default values for each of the parameters on the Setup menus. F9 key can be used for this operation. Load Failsafe Defaults Use the Load Failsafe Defaults option to load failsafe default values for each of the parameters on the Setup menus. F8 key can be used for this operation.
PAGE 175
PCIE-Q350 PICMG 1.
PAGE 176
PCIE-Q350 PICMG 1.3 CPU Card 7.1 Available Software Drivers NOTE: The content of the CD may vary throughout the life cycle of the product and is subject to change without prior notice. Visit the IEI website or contact technical support for the latest updates. The following drivers can be installed on the system: Intel® chipset driver LAN driver Audio driver Installation instructions are given below. 7.2 Driver CD Auto-run All the drivers for the PCIE-Q350 are on the CD that came with the system.
PAGE 177
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-1: Introduction Screen Step 3: Click PCIE-Q350. Step 4: A new screen with a list of available drivers appears (Figure 7-2). Figure 7-2: Available Drivers Step 5: Select the driver to install from the list in Figure 7-2. Detailed driver installation instructions follow below.
PAGE 178
PCIE-Q350 PICMG 1.3 CPU Card 7.3 Intel® Chipset Driver To install the Intel® chipset driver, please follow the steps below. Step 6: Select PCIE-Q350 from the list in Figure 7-1. Step 7: Select INF from the list in Figure 7-2. Step 8: The window shown in Figure 7-3 appears. Figure 7-3: Intel® Chipset Driver Directory Step 9: Click on the directory icon in Figure 7-3. Step 10: The window in Figure 7-4 appears.
PAGE 179
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-4: Intel® Chipset Driver Setup Icon Step 11: Click on the infinst_autol setup icon in Figure 7-4. Step 12: The Intel® Package Manager begins to extract the installation files. See Figure 7-5.
PAGE 180
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-5: Intel® Package Manager Step 13: The Intel® Setup Welcome screen. See Figure 7-6. Figure 7-6: Intel® Setup Welcome Screen Step 14: Click NEXT to continue. Step 15: The Intel® license agreement in appears.
PAGE 181
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-7: Intel® Chipset Driver License Agreement Step 16: Accept the terms and conditions by clicking YES. Step 17: The Readme file in Figure 7-8 appears. Figure 7-8: Readme File Step 18: Click NEXT to continue.
PAGE 182
PCIE-Q350 PICMG 1.3 CPU Card Step 19: The driver is then installed. Step 20: When the installation process is complete, the Setup Complete screen appears. See Figure 7-9. Figure 7-9: Intel® Chipset Driver Complete Installation Screen Step 21: To complete the chipset driver installation, click FINISH. Step 0: 7.4 Intel® Graphics Media Accelerator Driver To install the chipset driver, please follow the steps below: Step 1: Select the VGA driver from the list in Figure 7-2. Step 2: A new window opens.
PAGE 183
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-10: Select the Operating System Step 3: Select the operating system from those shown in Figure 7-10. Step 4: A new window appears. See Figure 7-11.
PAGE 184
PCIE-Q350 PICMG 1.3 CPU Card Step 5: Click the directory icon in Figure 7-11. Step 6: A new window appears. See Figure 7-12. Figure 7-12: Intel® VGA Driver Setup Icon Step 7: Click on the VGA driver installation icon in See Figure 7-12. Step 8: The Readme information file shown in Figure 7-13 appears.
PAGE 185
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-13: GMA Driver Readme File Step 9: Click NEXT to extract the GMA driver files. See Figure 7-14. Figure 7-14: GMA Driver File Extraction Step 10: The welcome screen shown in Figure 7-15 appears.
PAGE 186
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-15: GMA Driver Installation Welcome Screen Step 11: To continue the installation process, click NEXT. Step 12: The license agreement in Figure 7-16 appears. Figure 7-16: GMA Driver License Agreement Step 13: Click the YES in Figure 7-16 to continue.
PAGE 187
PCIE-Q350 PICMG 1.3 CPU Card Step 14: The installation notice shown in Figure 7-17 appears. Figure 7-17: GMA Driver Installing Notice Step 15: A confirmation screen shown in Figure 7-18 appears. Figure 7-18: GMA Driver Installation Complete Step 16: After selecting when to restart the computer in Figure 7-18, click FINISH. Step 16: 7.5 Intel® 82566 Gigabit LAN Connect Device Driver To install the Intel® 82566 Gigabit LAN connect device driver, please follow the steps below.
PAGE 188
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-19: Intel® 82566 Driver Directory Icon Step 19: Click on the Intel® 82566DM directory icon in Figure 7-19. Step 20: The window in Figure 7-20 appears.
PAGE 189
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-20: Intel® 82566 Operating System Step 21: Select the Operating System in Figure 7-20. Step 22: The window in Figure 7-21appears. Step 23: In Figure 7-21 select the operating system type installed on the system.
PAGE 190
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-21: Select Operating System Type Step 24: The window in Figure 7-22 appears. Figure 7-22: Driver Directory Step 25: Click on the directory icon in Figure 7-22.
PAGE 191
PCIE-Q350 PICMG 1.3 CPU Card Step 26: A window containing the Intel® 82566 driver startup icon appears. See Figure 7-23. Figure 7-23: Intel® 82566 Device Driver Startup Icon Step 27: Double click the Intel® 82566 driver startup icon in Figure 7-23. Step 28: The driver begins to extract the installation files. Step 29: The Welcome screen in Figure 7-24 appears next. Step 30: Click NEXT to continue.
PAGE 192
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-24: Intel® 82566 Welcome Screen Step 31: The license agreement in Figure 7-25 appears. Figure 7-25: Intel® 82566 Driver License Agreement Step 32: Accept the conditions of the license agreement and click NEXT to continue. Step 33: The Setup Options screen in Figure 7-26 appears next.
PAGE 193
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-26: Intel® 82566 Driver Setup Options Step 34: Select the required installation configuration in Figure 7-26 and click NEXT to continue. Step 35: The Ready to Install the Program window in Figure 7-27 appears. Figure 7-27: Intel® 82566 Driver Installation Ready Window Step 36: Click INSTALL in Figure 7-27. Step 37: The program starts to install the driver. The window in appears.
PAGE 194
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-28: Intel® 82566 Driver Installation Progress Step 38: When the installation is finished. Click FINISH in the termination screen. Step 0: 7.6 Intel® 82573 PCI Express Gigabit Ethernet Controller Driver To install the Intel® 82573 PCIe GbE controller, please follow the steps below. Step 1: Select LAN from the list in Figure 7-2. Step 2: The window in Figure 7-29 appears.
PAGE 195
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-29: Intel® 82573 Driver Directory Icon Step 3: Click on the Intel® 82573DM directory icon in Figure 7-29. Step 4: The window in Figure 7-30 appears.
PAGE 196
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-30: Intel® 82573 Operating System Step 5: Select the Operating System in Figure 7-30. Step 6: The window in Figure 7-31 appears. Step 7: In Figure 7-31 select the operating system type installed on the system.
PAGE 197
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-31: Select Operating System Type Step 8: The window in Figure 7-32 appears. Figure 7-32: Driver Directory Step 9: Click on the directory icon in Figure 7-22.
PAGE 198
PCIE-Q350 PICMG 1.3 CPU Card Step 10: A window containing the Intel® 82573 driver startup icon appears. See Figure 7-32. Figure 7-33: Intel® 82573 Driver Startup Icon Step 11: Click the startup icon in Figure 7-33. Step 12: The License Agreement for the Intel® 82573 appears. See Figure 7-34.
PAGE 199
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-34: Intel® 82573 License Agreement Step 13: Accept the license terms and agreements in and click NEXT to continue. Step 14: Next, select the directory in which the files must be saved. See Figure 7-35. Figure 7-35: Intel® 82573 File Location Select Step 15: Click NEXT to continue.
PAGE 200
PCIE-Q350 PICMG 1.3 CPU Card Step 16: The driver begins to extract the installation files. See Figure 7-36. Figure 7-36: Intel® 82573 Installation Files Extraction Step 17: The Intel® PRO Network Connections window appears. See Figure 7-37. Figure 7-37: Intel® PRO Network Connections window Step 18: Click INSTALL DRIVERS in Figure 7-37.
PAGE 201
PCIE-Q350 PICMG 1.3 CPU Card Step 19: The Intel® PRO Network Connections Welcome screen in Figure 7-38 appears. Figure 7-38: Intel® PRO Network Connections Welcome Step 20: Click NEXT to continue. Step 21: A new License Agreement appears. See Figure 7-39. Figure 7-39: License Agreement Step 22: Accept the terms and conditions in Figure 7-39 and click NEXT to continue.
PAGE 202
PCIE-Q350 PICMG 1.3 CPU Card Step 23: The Setup Type window in Figure 7-40 appears. Figure 7-40: Setup Type Step 24: Select the setup type in Figure 7-40 and click NEXT to continue. Step 25: The drivers are installed. See Figure 7-41. Figure 7-41: Intel® 82573 Driver Installation Progress Step 26: When the driver is installed. Click FINISH in the termination screen.
PAGE 203
PCIE-Q350 PICMG 1.3 CPU Card 7.7 Realtek HD Audio Driver (ALC883) Installation To install the Realtek High Definition (HD) Audio driver, please follow the steps below. NOTE: This driver only needs to be installed if an external audio kit with a RealTek ALC883 codec is installed. 7.7.1 BIOS Setup Step 1: Enter the BIOS setup. To do this, reboot the system and press DEL during POST. Step 2: Go to the Southbridge Configuration menu. Enable the High Definition Audio controller.
PAGE 204
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-42: Select the Audio CODEC Step 3: Double-click the ALC883 folder. Step 4: Double-click the appropriate operating system folder (Figure 7-43).
PAGE 205
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-43: Select the OS Step 5: Double-click the appropriate operating system version folder (Figure 7-44). Figure 7-44: Select the OS Version Step 6: Double-click the Setup.exe program icon in Figure 7-45.
PAGE 206
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-45: Locate the Setup Program Icon Step 7: The InstallShield Wizard starts (Figure 7-46). Figure 7-46: The InstallShield Wizard Starts Step 8: The InstallShield Wizard is prepared to guide the user through the rest of the process (Figure 7-47).
PAGE 207
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-47: Preparing Setup Screen Step 9: Once initialized, the InstallShield Wizard welcome screen appears (Figure 7-48). Figure 7-48: InstallShield Wizard Welcome Screen Step 10: Click NEXT to continue the installation. Step 11: InstallShield starts to install the new software as shown in Figure 7-49.
PAGE 208
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-49: Audio Driver Software Configuration Step 12: The Installation Wizard updates the system as shown in Figure 7-50. Figure 7-50: Installation Wizard Updates the System Step 13: After the driver installation process is complete, a confirmation screen appears (Figure 7-51).
PAGE 209
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-51: Restart the Computer Step 14: The confirmation screen offers the option of restarting the computer now or later. For the settings to take effect, the computer must be restarted. Click FINISH to restart the computer. Step 0: 7.8 Intel® Matrix Storage Manager Driver Installation To install the Intel® Matrix Storage Manager driver, please follow the steps below: Step 1: Select SATA from the list in Figure 7-2. Step 2: A new window opens (Figure 7-52).
PAGE 210
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-52: SATA RAID Driver Installation Program Step 3: Double-click the INTEL® folder. Step 4: Double-click the iata62_cd.exe program icon in Figure 7-53.
PAGE 211
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-53: SATA RAID Setup Program Icon Step 5: Figure 7-54 shows the InstallShield Wizard preparing to guide the user through the rest of the process.
PAGE 212
PCIE-Q350 PICMG 1.3 CPU Card Step 6: Figure 7-55 shows the Matrix Storage Manager software configuring the installation process. Figure 7-55: Matrix Storage Manager Setup Screen Step 7: Figure 7-56 shows the Matrix Storage Manager welcome screen. Figure 7-56: Matrix Storage Manager Welcome Screen Step 8: Click NEXT and a warning appears (Figure 7-57).
PAGE 213
PCIE-Q350 PICMG 1.3 CPU Card decide whether or not to continue the installation process. Figure 7-57: Matrix Storage Manager Warning Screen Step 9: Click NEXT and a license agreement appears (Figure 7-58). Figure 7-58: Matrix Storage Manager License Agreement Step 10: Read the license agreement. To accept the terms and conditions stipulated in the license agreement shown, click YES and the Readme information file shown in Figure 7-59 appears.
PAGE 214
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-59: Matrix Storage Manager Readme File Step 11: Read the Readme file information and click NEXT. Step 12: After the driver installation process is complete, a confirmation screen appears (Figure 7-60). Figure 7-60: Matrix Storage Manager Setup Complete Step 13: The confirmation screen offers the option of restarting the computer now or later.
PAGE 215
PCIE-Q350 PICMG 1.3 CPU Card For the settings to take effect, the computer must be restarted. Click FINISH to restart the computer. Step 0: 7.9 Intel® Active Management Technology Driver Installation To install the Intel® Active Management Technology (IAMT) driver, please follow the steps below: Step 1: Select iAMT and Utilities from the list in Figure 7-2. Step 2: The screen in Figure 7-61 appears. Figure 7-61: IAMT Driver Directory Step 3: Click on the LMS_SOL directory icon.
PAGE 216
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-62: IAMT Driver Installation Icon Step 4: Double click the setup icon in Figure 7-62. Step 5: The window in Figure 7-63 appears. Figure 7-63: IAMT Welcome Screen Step 6: Click NEXT to continue. The License Agreement in Figure 7-64 appears.
PAGE 217
PCIE-Q350 PICMG 1.3 CPU Card Figure 7-64: IAMT License Agreement Step 7: Agree to the terms and conditions in the license agreement by clicking YES. Step 8: The IAMT Readme file in Figure 7-65 appears Figure 7-65: IAMT Readme File Step 9: Click NEXT to continue.
PAGE 218
PCIE-Q350 PICMG 1.3 CPU Card Step 10: Setup operations are performed. See Figure 7-66. Figure 7-66: IAMT Setup Operations Step 11: When the Setup Operations in Figure 7-66 are complete, the window in Figure 7-67 appears. Figure 7-67: Completed Installation Step 12: Click FINISH to complete the IAMT installation.
PAGE 219
PCIE-Q350 PICMG 1.
PAGE 220
PCIE-Q350 PICMG 1.3 CPU Card System Overview .......................................................................................................... 110 System Time [xx:xx:xx]................................................................................................ 111 System Date [xx/xx/xx]................................................................................................. 111 SATA#1 Configuration [Enhanced].............................................................................
PAGE 221
PCIE-Q350 PICMG 1.3 CPU Card S.M.A.R.T [Enabled] ..................................................................................................... 131 Intel AMT Support [Disabled] ...................................................................................... 132 BootBlock HECI Message [Enabled] .......................................................................... 133 HECI Message [Enabled] .............................................................................................
PAGE 222
PCIE-Q350 PICMG 1.3 CPU Card Boot From LAN Support (82573L) [Disabled] ............................................................ 145 Change Supervisor Password..................................................................................... 146 Change User Password ............................................................................................... 146 Memory Remap Feature [Enabled] ............................................................................. 148 Memory Hole [Disabled]....
PAGE 223
PCIE-Q350 PICMG 1.
PAGE 224
PCIE-Q350 PICMG 1.3 CPU Card B.1 DIO Interface Introduction The DIO connector on the PCIE-Q350 is interfaced to GIO ports on the iTE Super I/O chipset. The DIO has both 8-bit digital inputs and 8-bit digital outputs. The digital inputs and digital outputs are generally control signals that control the on/off circuit of external devices or TTL devices. Data can be read or written to the selected address to enable the DIO functions.
PAGE 225
PCIE-Q350 PICMG 1.3 CPU Card 15 Input 7 11 (GP37) General purpose I/O port 3 bit 7 16 Output 7 20 (GP27) General purpose I/O port 2 bit 7 17 GND N/A N/A 18 +5V N/A N/A B.3 Assembly Language Samples B.3.1 Enable the DIO Input Function The BIOS interrupt call INT 15H controls the digital I/O. An assembly program to enable digital I/O input functions is listed below. MOV AX, 6F08H Sets the digital port as input INT 15H Initiates the INT 15H BIOS call B.3.
PAGE 226
PCIE-Q350 PICMG 1.
PAGE 227
PCIE-Q350 PICMG 1.3 CPU Card NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website visited for specific drivers for more sophisticated operating systems, e.g., Windows and Linux. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMI or a software bug.
PAGE 228
PCIE-Q350 PICMG 1.3 CPU Card NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets.
PAGE 229
PCIE-Q350 PICMG 1.
PAGE 230
PCIE-Q350 PICMG 1.3 CPU Card D.1 Introduction The Intel® ICH9DO chipset can provide data protection for serial ATA (SATA) disks via the Intel® Matrix Storage Manager using one of three fault-tolerant RAID levels: RAID 1, 5 or 10. When using two hard drives, matrix RAID allows RAID 0 and RAID 1 functions to be combined, where critical files can be stored on RAID 1, and RAID 0 can be used for non-critical items such as software.
PAGE 231
PCIE-Q350 PICMG 1.3 CPU Card CAUTION! Do not accidentally disconnect the SATA drive cables. Carefully route the cables within the chassis to avoid system down time. D.2 Features and Benefits Supports RAID levels 0, 1, 5 and 10 Supports connectivity to two or more disk drives Supported Operating Systems include: Windows XP, Windows Server 2003 and Windows Vista D.3 Accessing the Intel® Matrix Storage Manager To access the Intel® Matrix Storage Manager, please follow the steps below.
PAGE 232
PCIE-Q350 PICMG 1.3 CPU Card Step 3: Save and Exit BIOS. After the SATA support option is enabled, save and exit the BIOS. Step 4: Reboot the system. Reboot the system after saving and exiting the BIOS. Step 5: Press Ctrl+I. During the system boot process, press Ctrl+I when prompted to enter the RAID configuration software. Step 6: Configure the RAID settings. Use the Intel® Matrix Storage Manager to configure the RAID array. Brief descriptions of configuration options are given below.
PAGE 233
PCIE-Q350 PICMG 1.3 CPU Card Figure D-1: Matrix Storage Manager Main Menu Step 2: Name the RAID volume. Enter a name for the RAID volume, or press ENTER to accept the default volume name. Upper and lower case alphabetic, numeric, space, and underscore characters are all applicable for naming an array. See Figure D-2. Figure D-2: Create RAID Volume Name Step 3: Choose the RAID level. Select a RAID level from the list. RAID levels include RAID 0, 1, 5 and 10. See Figure D-3.
PAGE 234
PCIE-Q350 PICMG 1.3 CPU Card NOTE: RAID 0 and RAID1 levels require a minimum of two hard drives. RAID 10 level requires a minimum of four hard drives. RAID5 level requires a minimum of three hard drives. Figure D-3: Choose the Raid Level Step 4: Select the Stripe Size. Select a stripe size from the list. See Figure D-4.
PAGE 235
PCIE-Q350 PICMG 1.3 CPU Card Figure D-4: Select the Stripe Size Step 5: Enter the Volume Capacity. Enter the volume capacity, or press ENTER to accept the default capacity. See Figure D-5. Figure D-5: Enter the Volume Capacity Step 6: Create the RAID Volume. Press ENTER to create the RAID volume as specified. See Figure D-6.
PAGE 236
PCIE-Q350 PICMG 1.3 CPU Card Figure D-6: Create the RAID Volume Step 7: Create RAID Volume Verification. After reading the warning, press Y to create the RAID volume as specified, or N to return to the Create RAID Volume menu. See Figure D-7.
PAGE 237
PCIE-Q350 PICMG 1.3 CPU Card D.4.2 Deleting a RAID Volume WARNING! All data stored on the member drives of a RAID volume are destroyed during the RAID deletion process. Make sure any data to be saved has been moved or backed up before deleting a RAID volume. Step 8: Select “Delete RAID Volume.” Use the arrow keys to highlight Delete RAID Volume and press ENTER. See Figure D-8.
PAGE 238
PCIE-Q350 PICMG 1.3 CPU Card Step 9: Select RAID Volume to be Deleted. Use the arrow keys to highlight the RAID volume to be deleted and press ENTER. See Figure D-9. Figure D-9: Select RAID Volume to be Deleted Step 10: Delete Volume Verification. After reading the warning, press Y to delete the specified RAID volume, or N to return to the Delete Volume menu. See Figure D-10. Figure D-10: Delete Volume Verification Step 11: Non-RAID Disks.
PAGE 239
PCIE-Q350 PICMG 1.3 CPU Card Figure D-11: Non-RAID Disks D.4.3 Resetting a Disk to Non-RAID WARNING! All data stored on the disk drive of a RAID volume is destroyed when resetting it to non-RAID. Make sure any data to be saved has been moved or backed up before resetting a disk to non-RAID. Step 12: Select “Reset Disk to Non-RAID.” Use the arrow keys to highlight Reset Disk to Non-RAID and press ENTER. See Figure D-12.
PAGE 240
PCIE-Q350 PICMG 1.3 CPU Card Figure D-12: Reset Disk to Non-RAID Menu Step 13: Select Disks to Reset. Use the arrow keys to scroll through the disk drives and press SPACE to select which drives are to be reset as non-RAID. After all the disks to be reset have been chosen, press ENTER. See Figure D-13. Figure D-13: Select Disk to Reset Step 14: Reset Disk Verification. After reading the warning, press Y to reset the selected disks as non-RAID, or N to return to the Reset RAID Data menu. See Figure D-14.
PAGE 241
PCIE-Q350 PICMG 1.3 CPU Card Figure D-14: Reset Disk Verification Step 15: Disk Drive and RAID Volume Status. After the disk drives have been reset, the Matrix Storage Manager Main menu is shown indicating the status of the RAID volumes and disk drives. See Figure D-15. Step 15: Figure D-15: Disk Drive and RAID Volume Status D.4.4 Exiting the Matrix Storage Manager Step 16: Select “Exit.” Use the arrow keys to highlight Exit and press ENTER. See Figure D-16.
PAGE 242
PCIE-Q350 PICMG 1.3 CPU Card Figure D-16: Exit Menu Step 17: Exit Verification. Press Y to exit the Matrix Storage Manager, or N to return to the Main menu. See Figure D-17.
PAGE 243
PCIE-Q350 PICMG 1.
PAGE 244
PCIE-Q350 PICMG 1.3 CPU Card E.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
PAGE 245
PCIE-Q350 PICMG 1.
PAGE 246
PCIE-Q350 PICMG 1.
PAGE 247
PCIE-Q350 PICMG 1.
PAGE 248
PCIE-Q350 PICMG 1.3 CPU Card NOTE: The compatible items described here have been tested by the IEI R&D team and found to be compatible with the PCIE-Q350 F.1 Compatible Operating Systems The following operating systems have been successfully run on the PCIE-Q350.
PAGE 249
PCIE-Q350 PICMG 1.3 CPU Card Intel® Core™2 Duo E6750 2.66 GHz 1333 MHz Intel® Core™2 Duo E6550 2.33 GHz 1333 MHz Intel® Core™2 Duo E4400 2.00 GHz 800 MHz Intel® Core™2 Duo E4300 1.80 GHz 800 MHz Intel® Pentium® D 820 2.80 GHz 800 MHz Intel® Pentium® 4 651 3.40 GHz 800 MHz Intel® Pentium® 4 661 3.60 GHz 800 MHz Intel® Pentium® 4 670 3.8 GHz 800 MHz Intel® Pentium® 4 Extreme Edition 3.73 GHz 1066 MHz F.
PAGE 250
PCIE-Q350 PICMG 1.3 CPU Card F.4 Compatible CD ROM Drives NOTE: The CD ROM drives listed below have been tested on the PCIE-Q350 other CD ROM drives s that comply with the specifications may also work on the PCIE-Q350 but have not been tested. The following CD ROM drives have been successfully tested on the PCIE-Q350. Manufacturer Model No. Speed Interface Description ASUS CRW-5232A-U/QT 52X CD-RW USB 2.