User Manual

PCIE-Q350 PICMG 1.3 CPU Card
Page 120

Enabled DEFAULT
Legacy USB support enabled

Auto
Legacy USB support disabled if no USB devices are
connected
 USB2.0 Controller Mode [HiSpeed]
Use the USB2.0 Controller Mode option to set the speed of the USB2.0 controller.

FullSpeed
The controller is capable of operating at 12Mb/s

HiSpeed DEFAULT
The controller is capable of operating at 480Mb/s
6.4 PCI/PnP
Use the PCI/PnP menu (BIOS Menu 16) to configure advanced PCI and PnP settings.
BIOS SETUP UTILITY
Main Advanced PCIPNP Boot Security Chipset Exit
Advanced PCI/PnP Settings
⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯
WARNING: Setting wrong values in below sections
may cause system to malfunction
IRQ3 [Reserved]
IRQ4 [Reserved]
IRQ5 [Available]
IRQ7 [Available]
IRQ9 [Available]
IRQ10 [Available]
IRQ11 [Available]
IRQ14 [Available]
IRQ15 [Available]
DMA Channel 0 [Available]
DMA Channel 1 [Available]
DMA Channel 3 [Available]
DMA Channel 5 [Available]
DMA Channel 6 [Available]
DMA Channel 7 [Available]
Reserved Memory Size [Disabled]
Avail
a
ble: Specified IRQ
is available to be use
the PCI/PnP devices
R
eserved: Specified IRQ
is reserved for use by
legacy ISA devices
 Select Screen
↑ ↓ Select Item
Enter Go to SubScreen
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 ©Copyright 1985-2006, American Megatrends, Inc.
BIOS Menu 16: PCI/PnP Configuration