Owner's manual

PICOe-PV-D4251/N4551/D5251 User Manual
Page 47
Clear CMOS Description
Short 1 - 2 Keep CMOS Setup Default
Short 2 - 3 Clear CMOS Setup
Table 4-5: Clear CMOS Jumper Settings
The location of the clear CMOS jumper is shown in 6Figure 4-6 below.
Figure 4-6: Clear CMOS Jumper
4.5.5 LVDS Voltage Select Jumper
WARNING:
Permanent damage to the screen and PICOe-PV-D4251/N4551/D5251
may occur if the wrong voltage is selected with this jumper. Please
refer to the user guide that cam with the monitor to select the correct
voltage.
Jumper Label: J_VLVDS1
Jumper Type:
6-pin header
Jumper Settings:
See
Table 4-6
Jumper Location:
See
Figure 4-7
The LVDS Voltage Selection jumpers allow the LVDS screen voltages to be set.
J_VLVDS1 sets the voltage connected to LVDS1. The LVDS Voltage Selection jumper
settings are shown in
Table 4-6.