Instruction Manual

PICOe-PV-D4251/N4551/D5251 User Manual
Page 93
 Quiet Boot [Enabled]
Use the Quiet Boot BIOS option to select the screen display when the system boots.

Disabled
Normal POST messages displayed

Enabled DEFAULT
OEM Logo displayed instead of POST messages
 Launch PXE OpROM [Disabled]
Use the Launch PXE OpROM option to enable or disable boot option for legacy network
devices.

Disabled DEFAULT
Ignore all PXE Option ROMs

Enabled
Load PXE Option ROMs.
5.6 Security
Use the Security menu (BIOS Menu 20) to set system and user passwords.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Main Advanced Chipset Boot Security Save & Exit
Password Description
If ONLY the Administrator’s password is set,
then this only limits access to Setup and is
only asked for when entering Setup
If ONLY the User’s password is set, then this
is a power on password and must be entered to
boot or enter Setup. In Setup the User will
have Administrator rights.
Administrator Password
User Password
 : Select Screen
 : Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 20: Security
 Administrator Password
Use the Administrator Password to set or change a administrator password.