Instruction Manual

PICOe-PV-D4251/N4551/D5251 User Manual
Page 103
NOTE:
Installing unsupported OS versions may cause the recovery tool to fail.
B.2 Setup Procedure for Windows
Prior to using the recovery tool to backup or restore Windows system, a few setup
procedures are required.
Step 1: Hardware and BIOS setup (see Section
769H769HB.2.1)
Step 2: Create partitions (see Section
770H770HB.2.2)
Step 3: Install operating system, drivers and system applications (see Section
771H771HB.2.3)
Step 4: Build-up recovery partition (see Section
772H772HB.2.4)
Step 5: Create factory default image (see Section
773H773HB.2.5) Step 0:
The detailed descriptions are described in the following sections.
NOTE:
The setup procedures described below are for Microsoft Windows
operating system users. For Linux system, most setup procedures are
the same with Microsoft Windows except for several steps which is
described in Section
774H774HB.3.
B.2.1 Hardware and BIOS Setup
Step 1: Make sure the system is powered off and unplugged.
Step 2: Install a hard drive or SSD in the system. An unformatted and unpartitioned disk
is recommended.
Step 3: Connect an optical disk drive to the system and insert the recovery CD.