Instruction Manual

PICOe-PV-D4251/N4551/D5251 User Manual
Page 82
5.3.6.3 Parallel Port Configuration
Use the Parallel Port Configuration menu (BIOS Menu 9) to configure the serial port n.
Aptio Setup Utility – Copyright (C) 2010 American Megatrends, Inc.
Advanced
Parallel Port Configuration
Parallel Port [Enabled]
Device Settings IO=378h; IRQ=7
Change Settings [Auto]
Device Mode [Printer Mode]
 : Select Screen
 : Select Item
Enter Select
F1 General Help
F2 Previous Values
F3 Optimized
Defaults
F4 Save
ESC Exit
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
BIOS Menu 11: Parallel Port Configuration Menu
 Parallel Port [Enabled]
Use the Parallel Port option to enable or disable the parallel port.

Disabled
Disable the parallel port

Enabled DEFAULT
Enable the parallel port
 Change Settings [Auto]
Use the Change Settings option to change the parallel port IO port address and interrupt
address.

Auto DEFAULT
The parallel port IO port address and interrupt
address are automatically detected.

IO=378h;
IRQ=7
Parallel Port I/O port address is 378h and the
interrupt address is IRQ7

IO=278h;
IRQ=7
Parallel Port I/O port address is 278h and the
interrupt address is IRQ7