User guide

PICOe-PV-D4251/N4551/D5251 User Manual
Page 49
LCD Voltage Select Description
Short 1-2 +3.3V Default
Short 3-4 +5V
Short 5-6 +12V
Table 4-6: LVDS Voltage Selection Jumper Settings
The LVDS Voltage Selection jumper location is shown in Figure 4-7.
Figure 4-7: LVDS Voltage Selection Jumper Location
4.5.6 PCIe Status Select Jumper
Jumper Label: JP1
Jumper Type:
2-pin header
Jumper Settings:
See
Table 4-7
Jumper Location:
See
Figure 4-8
The PCIe Status Select jumper allows the PCIe status to be configured. The PCIe Status
Select jumper settings are shown in
Table 4-6.
PCIe Status Select Description
Open One PCIe x4
Short Four PCIe x1 Default
Table 4-7: PCIe Status Select Jumper Settings
The PCIe Status Select jumper location is shown in Figure 4-7.