User Manual

Installation

This chapter describes how to install the PM-1028.

2.1 Hardware Installation

Installation of the PC/104 modules on CPU card is quick and

simple. The following steps describe how to mount the PC/104

modules.

Note: Ground yourself to remove any static charge before

touching your PM-1028. You can do it by using a grounded wrist

strap at all times or by frequently touching any conducting

materials that are connected to the ground.

1. Turn the power off

2. Plug the PC/104 module in to the connectors on the CPU

card carefully

3. Secure the PC/104 module with the four mounting spacers

and screws

4. Set the jumper settings

5. Attach the cables

6. Turn the power on