Instruction Manual
Table Of Contents
- 1 Introduction
- 2 Unpacking
- 3 Connectors
- 3.1 Peripheral Interface Connectors
- 3.2 Internal Peripheral Connectors
- 3.2.1 12V / 5V Power Connector
- 3.2.2 ATX Power Supply Enable Connector
- 3.2.3 Audio Kit Connector
- 3.2.4 Battery Connector
- 3.2.5 CompactFlash® Connector
- 3.2.6 Fan Connector
- 3.2.7 Digital I/O Connector
- 3.2.8 Keyboard/Mouse Connector
- 3.2.9 LAN Connector
- 3.2.10 LCD Inverter Connector
- 3.2.11 LED and +5V Output Connector
- 3.2.12 PCI-104 Connector
- 3.2.13 Power Button Connector
- 3.2.14 Reset Button Connector
- 3.2.15 RS-232 Serial Port Connectors
- 3.2.16 RS-422/485 Serial Port Connector
- 3.2.17 LVDS LCD Connector
- 3.2.18 SATA Drive Connector
- 3.2.19 SPI Flash Connector
- 3.2.20 USB Connector
- 3.2.21 VGA Connector
- 4 Installation
- 5 BIOS
- A BIOS Options
- B Terminology
- C Watchdog Timer
- D Hazardous Materials Disclosure
PM-945GSE-N270 User Manual
Page 15
ranging from 0°C to 60°C
Rebooting automatically if the BIOS watchdog timer detects that the system is
no longer operating
1.1.3 Features
Some of the PM-945GSE-N270 motherboard features are listed below:
Complies with RoHS
Supports Intel® Atom™ N270 CPU
Supports a maximum front side bus (FSB) speed up to 533MHz
1 GB on-board DDR 533 SDRAM
Complete I/O support with SATA, CF Type II, PCI-104, LAN, and 4 x USB2.0
and 4 x RS-232, 1 x RS-422/485 support shared with COM2
Supports 18-bit dual channel LVDS + VGA, dual independent display