Instruction Manual

PM-945GSE-N270 User Manual
Page 63
Separately purchased optional IEI items that can be installed are listed below:
 ATX power cable
 5.1 AC’97 Audio kit
 7.1 HD Audio kit
 SATA power cable
For more details about the items listed above, please refer to Chapter 2.4. Installation of
the acce
ssories listed above is described in detail below.
4.7.1 Keyboard/Mouse Y-cable Connector
The PM-945GSE-N270-R11 is shipped with a keyboard/mouse Y-cable connector. The
keyboard/mouse Y-cable connector connects to a keyboard/mouse connector on the
PM-945GSE-N270-R11 and branches into two cables that are each connected to a PS/2
connector, one for a mouse and one for a keyboard. To connect the keyboard/mouse
Y-cable connector, please follow the steps below.
Step 3: Locate the connector. The location of the keyboard/mouse Y-cable connector
is shown in Section 3.1.1.
Step 4: Align the co
nnectors. Correctly align pin 1 on the cable connector with pin 1 on
the PM-945GSE-N270-R11 keyboard/mouse connector. See Figure 4-7.
Step 5: Insert
the cable connectors. Once the cable connector is properly aligned with
the keyboard/mouse connector on the PM-945GSE-N270-R11, connect the
cable connector to the onboard connectors. See Figure 4-7.