Instruction Manual

PM-PV-D4251/N4551/D5251 User Manual
Page 51
Figure 4-11: Backlight Inverter Connection
4.8.3 SATA Drive Connection
The PM-PV-D4251/N4551/D5251 is shipped with two SATA drive cables and one SATA
drive power cable. To connect the SATA drives to the connectors, please follow the steps
below.
Step 1: Locate the connectors. The locations of the SATA drive connectors are shown
in Chapter 3.
Step 2: Insert the cable connector. Press the clip on the connector at the end of the
SATA cable and insert the cable connector into the on-board SATA drive
connector. See
Figure 4-12.