PX-10S ISA/PCI Bridge Backplane User’s Manual ©2006 Copyright by IEI Technology corp. All rights reserved.
Contents Introduction ……………………………………………………………………………2 Product Features …………………...……………………………………………………2 Routing List ……………………………………...………………………………….…3 Board Drawing ………………………………...………………………………………..3 Connectors ………………………………...………………………………………4 Pin Assignment ………………………………………………………………………….4 Installation Guide ………………………...……………………………………………..
PX-10S ISA/PCI Bridge Backplane Introduction PX-10S is exactly the backplane what you want, even in the future. As you know, most of the adapters are of PCI bus, and ISA adapters are on the decrease in the market. If this problem have bothered you for a long time, then PX-10S is the right answer for you. In order to solve the problem, PX-10S, includes 7 32-bit PCI slots (5V/3.3V) on board, gives the great flexibility for your system’s extension.
for soft on/off ATX power supply.
Connectors CONNECTOR ISA2/PCI1 & ISA4/PCI2 PCI3-PCI9 ISA1,ISA3 PW1 PW2 CN1 CN2 CN3,CN5 CN4 DESCRIPTION PICMG connectors 32-BIT PCI BUS connectors 16-BIT ISA BUS connectors P8/P9 power connector ATX power connector DC power outlet ATX P/S control connector Fan connector Power good signal output Pin Assignment P8/P9(PW1) PIN NAME 1 PWR OK 2 +5V 3 +12V 4 -12V 5 GND 6 GND 7 GND 8 GND 9 -5V 10 +5V 11 +5V 12 +5V ATX(PW2) PIN NAME PIN NAME 1 +3.3V 11 +3.3V 2 +3.
over the 3-pin header CN2. (A toggle switch is required over your SBC for this application. Image. 4). 3.If you use ATX power supply, you may also plug a switch into pin-2 and pin-3 of CN2. In this application, the 3-pin ATX power control cable is not required, and your ATX power supply will then act as AT power supply (Image. 5). Image 1 Image 2 Image 3 Image 4 Image 5 Fan CN33 and CN5 are fan connectors. Please refer to the pin assignment table for proper connection.
