User Manual

ManualsBrandsIEI Integration ManualsHardwareSAIDE-KIT01

Daughter Card with SATA to IDE & CF Type II Converter

SAIDE-KIT01

Quick Installation Guide

Version 1.0

May 12, 2008

Package Contents

SAIDE-KIT01 package includes the following items:

z 1 x SAIDE-KIT01 Daughter Card

z 1 x Power Cable

z 1 x QIG (Quick Installation Guide)

Summary of content (5 pages)

PAGE 1
Daughter Card with SATA to IDE & CF Type II Converter SAIDE-KIT01 Quick Installation Guide Version 1.0 May 12, 2008 Package Contents SAIDE-KIT01 package includes the following items: z 1 x SAIDE-KIT01 Daughter Card z 1 x Power Cable z 1 x QIG (Quick Installation Guide) ©2006 Copyright by IEI Technology corp. All rights reserved.
PAGE 2
Specifications z Daughter Card with SATA to IDE & CF Type II Converter Only one IDE or CF device can be install and use in the same time. z Chipset: JMicron JM20330 z Compliance to Serial ATA Generation1 z ATA/ATAPI PIO mode 0 to 4 z ATA/ATAPI Ultra DMA transfer rate up to 150MB/s z 3.5-inch Hard Disk Drive and ATAPI Optical Storage z Compliance with CFI/II and Micro Drive z LED Indicator for Power Linked. SATA Linked and HDD Activity z Mount in bracket.
PAGE 3
Jumpers Setting and Connectors PW1: Power Connector PIN Description 1 N/C 2 GND 3 GND 4 +5V SATA1: Serial ATA Connector PIN Description 1 GND 2 TXP 3 TXN 4 GND 5 RXN 6 RXP 7 GND IDE2: 2X20 Pin IDE Connector (P=2.
PAGE 4
I CF1: Compact Flash Storage Card Socket PIN Description PIN GROUND 1 26 DATA 3 2 27 DATA 4 3 28 DATA 5 4 29 DATA 6 5 30 DATA 7 6 31 CS1# 7 32 N/C 8 33 GROUND 9 34 N/C 10 35 N/C 11 36 N/C 12 37 VCC 13 38 N/C 14 39 N/C 15 40 N/C 16 41 N/C 17 42 SA2 18 43 SA1 19 44 SA0 20 45 DATA 0 21 46 DATA 1 22 47 DATA 2 23 48 N/C 24 49 IDE_DETECT 25 50 Description IDE_DETECT DATA 11 DATA 12 DATA 13 DATA 14 DATA 15 CS3# N/C IOR# IOW# VCC IRQ15 VCC MASTER N/C RESET# IORDY DMARQ DMACK# ACTIVE# PDIAG# DATA 8 DATA 9 DATA 10 G
PAGE 5
Board Layout: Jumper and Connector Locations 5