User guide

ManualsBrandsIEI Integration ManualsHardwareSPCIE-C2260-i2

SPCIE-C2260-i2 PICMG 1.3 CPU Card

Page i

User Manual

MODEL:

SPCIE-C2260-i2

Full-Size PICMG 1.3 CPU Card Supports LGA1150 Intel

Xeon® E3, Core™ i3, Pentium® or Celeron® CPU, Intel® C226

Chipset, DDR3, VGA, iDP, Dual Intel® PCIe GbE, SATA 6Gb/s,

PCIe Mini, mSATA, RS-232, HD Audio, iRIS-2400 and RoHS

Rev. 1.02 – 24 April, 2014

Summary of content (217 pages)

PAGE 1
SPCIE-C2260-i2 PICMG 1.3 CPU Card MODEL: SPCIE-C2260-i2 Full-Size PICMG 1.3 CPU Card Supports LGA1150 Intel® Xeon® E3, Core™ i3, Pentium® or Celeron® CPU, Intel® C226 Chipset, DDR3, VGA, iDP, Dual Intel® PCIe GbE, SATA 6Gb/s, PCIe Mini, mSATA, RS-232, HD Audio, iRIS-2400 and RoHS User Manual Page i Rev. 1.
PAGE 2
SPCIE-C2260-i2 PICMG 1.3 CPU Card Revision Date Version Changes 24 April, 2014 1.02 Modified LAN pinouts Updated Chapter 2: Packing List 24 March, 2014 1.01 Deleted I2C information Updated Section 2.4: Optional Items 14 January, 2014 Page ii 1.
PAGE 3
SPCIE-C2260-i2 PICMG 1.3 CPU Card Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
PAGE 4
SPCIE-C2260-i2 PICMG 1.3 CPU Card Table of Contents 1 INTRODUCTION.......................................................................................................... 1 1.1 INTRODUCTION........................................................................................................... 2 1.2 FEATURES ................................................................................................................... 3 1.3 CONNECTORS ................................................................
PAGE 5
SPCIE-C2260-i2 PICMG 1.3 CPU Card 3.2.12 Infrared Interface Connector ......................................................................... 28 3.2.13 iRIS Module Slot ............................................................................................ 29 3.2.14 Keyboard and Mouse Connector ................................................................... 30 3.2.15 LAN LED Connectors .................................................................................... 31 3.2.
PAGE 6
SPCIE-C2260-i2 PICMG 1.3 CPU Card 4.4.2 CPU Card Installation ..................................................................................... 57 4.5 INTERNAL PERIPHERAL DEVICE CONNECTIONS ........................................................ 57 4.5.1 Dual RS-232 Cable with Slot Bracket.............................................................. 57 4.5.2 iRIS Module Installation .................................................................................. 58 4.5.3 SATA Drive Connection ......
PAGE 7
SPCIE-C2260-i2 PICMG 1.3 CPU Card 5.3.9.2 Parallel Port Configuration ....................................................................... 91 5.3.10 F81866 H/W Monitor..................................................................................... 93 5.3.10.1 Smart Fan Mode Configuration .............................................................. 94 5.3.11 Serial Port Console Redirection..................................................................... 95 5.3.12 iEi Feature ...................
PAGE 8
SPCIE-C2260-i2 PICMG 1.3 CPU Card B.2.3 Install Operating System, Drivers and Applications ..................................... 150 B.2.4 Build-up Recovery Partition.......................................................................... 151 B.2.5 Create Factory Default Image....................................................................... 153 B.3 AUTO RECOVERY SETUP PROCEDURE .................................................................... 158 B.4 SETUP PROCEDURE FOR LINUX ....................
PAGE 9
SPCIE-C2260-i2 PICMG 1.3 CPU Card F.4 INSTALLING THE OPERATING SYSTEM TO THE RAID ARRAY .................................. 196 G HAZARDOUS MATERIALS DISCLOSURE ....................................................... 197 G.1 HAZARDOUS MATERIALS DISCLOSURE TABLE FOR IPB PRODUCTS CERTIFIED AS ROHS COMPLIANT UNDER 2002/95/EC WITHOUT MERCURY .....................................
PAGE 10
SPCIE-C2260-i2 PICMG 1.3 CPU Card List of Figures Figure 1-1: SPCIE-C2260-i2 ...........................................................................................................2 Figure 1-2: Connectors ..................................................................................................................4 Figure 1-3: SPCIE-C2260-i2 Dimensions (mm) ............................................................................5 Figure 1-4: Data Flow Diagram....................................
PAGE 11
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 3-27: USB 3.0 Connector Location .................................................................................41 Figure 3-28: External Peripheral Interface Connector ..............................................................42 Figure 3-29: Ethernet Connector.................................................................................................42 Figure 3-30: VGA Connector ..............................................................................
PAGE 12
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 6-9: Graphics Driver License Agreement.................................................................... 122 Figure 6-10: Graphics Driver Read Me File ............................................................................. 122 Figure 6-11: Graphics Driver Setup Operations ..................................................................... 123 Figure 6-12: Graphics Driver Installation Finish Screen .......................................................
PAGE 13
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure B-14: Select a Local Source Drive ............................................................................... 155 Figure B-15: Select a Source Partition from Basic Drive ...................................................... 155 Figure B-16: File Name to Copy Image to ............................................................................... 156 Figure B-17: Compress Image.......................................................................................
PAGE 14
SPCIE-C2260-i2 PICMG 1.3 CPU Card List of Tables Table 1-1: SPCIE-C2260-i2 Specifications ...................................................................................9 Table 2-1: Packing List.................................................................................................................13 Table 2-2: Optional Items.............................................................................................................15 Table 3-1: Peripheral Interface Connectors .................
PAGE 15
SPCIE-C2260-i2 PICMG 1.3 CPU Card Table 3-28: USB 3.0 Connector Pinouts .....................................................................................41 Table 3-29: LAN Pinouts ..............................................................................................................42 Table 3-30: Connector LEDs........................................................................................................43 Table 3-31: USB 3.0 Port Pinouts..................................................
PAGE 16
SPCIE-C2260-i2 PICMG 1.3 CPU Card BIOS Menus BIOS Menu 1: Main .......................................................................................................................75 BIOS Menu 2: Advanced ..............................................................................................................77 BIOS Menu 3: ACPI Configuration ..............................................................................................77 BIOS Menu 4: RTC Wake Settings ...............................
PAGE 17
SPCIE-C2260-i2 PICMG 1.3 CPU Card BIOS Menu 31: IEI Feature........................................................................................................
PAGE 18
SPCIE-C2260-i2 PICMG 1.
PAGE 19
SPCIE-C2260-i2 PICMG 1.3 CPU Card 1.1 Introduction Figure 1-1: SPCIE-C2260-i2 The SPCIE-C2260-i2 is a PICMG 1.3 CPU card. It accepts a Socket LGA1150 Intel® Xeon® E3, Core™ i3, Pentium® or Celeron® processor and supports four 240-pin 1600/1333 MHz dual-channel DDR3 DIMM modules up to 32 GB. The SPCIE-C2260-i2 provides two GbE interfaces through the Intel® I217LM (with Intel® AMT 9.0 support) and the Intel® I210 PCIe controllers. The integrated Intel® C226 chipset supports six SATA 6Gb/s drives.
PAGE 20
SPCIE-C2260-i2 PICMG 1.3 CPU Card 1.2 Features Some of the SPCIE-C2260-i2 motherboard features are listed below: PICMG 1.3 full-size solution LGA1150 Intel® Xeon® E3, Core™ i3, Pentium® or Celeron® processor supported Intel® C226 chipset Four 240-pin 1600/1333 MHz dual-channel DDR3 DIMMs support up to 32 GB Dual independent display by VGA and iDP interfaces Supports IPMI 2.
PAGE 21
SPCIE-C2260-i2 PICMG 1.3 CPU Card 1.3 Connectors The connectors on the SPCIE-C2260-i2 are shown in the figure below.
PAGE 22
SPCIE-C2260-i2 PICMG 1.3 CPU Card 1.4 Dimensions The main dimensions of the SPCIE-C2260-i2 are shown in the diagram below.
PAGE 23
SPCIE-C2260-i2 PICMG 1.3 CPU Card 1.5 Data Flow Figure 1-4 shows the data flow between the system chipset, the CPU and other 8 components installed on the motherboard.
PAGE 24
SPCIE-C2260-i2 PICMG 1.3 CPU Card 1.6 Technical Specifications The SPCIE-C2260-i2 technical specifications are listed below. Specification/Model SPCIE-C2260-i2 Form Factor PICMG 1.3 CPU Supported LGA1150 Intel® Xeon® E3, Core™ i3, Pentium® or Celeron® CPU Chipset Intel® C226 Memory Four 240-pin 1600/1333 MHz dual-channel ECC/non-ECC unbuffered DDR3/DDR3L SDRAM DIMMs support (system max. 32 GB) Intel® HD Graphics Gen 7.5 supports DirectX 11.1, OpenCL 1.2 and Graphics Engine OpenGL 3.
PAGE 25
SPCIE-C2260-i2 PICMG 1.3 CPU Card Specification/Model SPCIE-C2260-i2 One VGA (up to 1920 x 1200, 60 Hz) Display Output One iDP interface for HDMI, LVDS, VGA, DVI and DisplayPort (up to 3840 x 2160, 60 Hz) Ethernet Two RJ-45 GbE ports One 4-pin smart fan connector (CPU fan) Fan One 4-pin smart fan connector (system fan) Front Panel One 14-pin header (power LED, HDD LED, IPMI LED, speaker, power button, reset button) Infrared One via 5-pin header IPMI 2.
PAGE 26
SPCIE-C2260-i2 PICMG 1.
PAGE 27
SPCIE-C2260-i2 PICMG 1.
PAGE 28
SPCIE-C2260-i2 PICMG 1.3 CPU Card 2.1 Anti-static Precautions WARNING! Static electricity can destroy certain electronics. Make sure to follow the ESD precautions to prevent damage to the product, and injury to the user. Make sure to adhere to the following guidelines: Wear an anti-static wristband: Wearing an anti-static wristband can prevent electrostatic discharge. Self-grounding: Touch a grounded conductor every few minutes to discharge any excess static buildup.
PAGE 29
SPCIE-C2260-i2 PICMG 1.3 CPU Card 2.3 Packing List NOTE: If any of the components listed in the checklist below are missing, do not proceed with the installation. Contact the IEI reseller or vendor the SPCIE-C2260-i2 was purchased from or contact an IEI sales representative directly by sending an email to sales@ieiworld.com.
PAGE 30
SPCIE-C2260-i2 PICMG 1.3 CPU Card Quantity Item and Part Number 1 Utility CD 1 Quick Installation Guide Image Table 2-1: Packing List 2.4 Optional Items The following are optional components which may be separately purchased: Item and Part Number Image iRIS-2400 module, IPMI 2.0 adapter card with AST2400 BMC chip for DDR3 SO-DIMM socket interface (P/N: iRIS-2400-R10) RS-422/485 cable, 200 mm (P/N: 32205-003800-300-RS) Dual-port USB 3.
PAGE 31
SPCIE-C2260-i2 PICMG 1.3 CPU Card Item and Part Number 7.
PAGE 32
SPCIE-C2260-i2 PICMG 1.
PAGE 33
SPCIE-C2260-i2 PICMG 1.
PAGE 34
SPCIE-C2260-i2 PICMG 1.3 CPU Card 3.1 Peripheral Interface Connectors This chapter details all the peripheral interface connectors. 3.1.1 SPCIE-C2260-i2 Layout The figures below show all the peripheral interface connectors.
PAGE 35
SPCIE-C2260-i2 PICMG 1.3 CPU Card 3.1.2 Peripheral Interface Connectors The table below lists all the connectors on the board.
PAGE 36
SPCIE-C2260-i2 PICMG 1.3 CPU Card Connector Type Label Serial port, RS-232 10-pin box header Serial port, RS-422/485 4-pin wafer COM2 SMBus connector 4-pin wafer CN2 SPI flash connector 8-pin header JSPI1 SPI flash connector, EC 8-pin header JSPI2 TPM connector 20-pin header TPM1 USB 2.0 connectors 8-pin header USB1, USB2 USB 3.0 connector 19-pin box header CN7 COM1, COM3, COM4, COM5 Table 3-1: Peripheral Interface Connectors 3.1.
PAGE 37
SPCIE-C2260-i2 PICMG 1.3 CPU Card 3.2 Internal Peripheral Connectors The section describes all of the connectors on the SPCIE-C2260-i2. 3.2.1 +12V ATX Power Supply Connector CN Label: CPU12V1 CN Type: 4-pin Molex power connector CN Location: See Figure 3-2 CN Pinouts: See Table 3-3 This connector provides power to the CPU. Figure 3-2: ATX Power Connector Pinout Location Pin Description Pin Description 1 GND 2 GND 3 +12V 4 +12V Table 3-3: ATX Power Connector Pinouts 3.2.
PAGE 38
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 3-3: Audio Connector Location Pin Description Pin Description 1 HDA_SYNC 2 HDA_BIT_CLK 3 HDA_SDOUT 4 HDA_SPKR 5 HDA_SDIN 6 HDA_RST# 7 HDA_VCC 8 HDA_GND 9 HDA_+12V 10 HDA_GND Table 3-4: Audio Connector Pinouts 3.2.3 Battery Connector CAUTION: Risk of explosion if battery is replaced by an incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations.
PAGE 39
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 3-4: Battery Connector Location Pin Description 1 VBATT 2 GND Table 3-5: Battery Connector (BAT1) Pinouts 3.2.4 Chassis Intrusion Connector CN Label: CHASSIS1 CN Type: 2-pin header CN Location: See Figure 3-5 CN Pinouts: See Table 3-6 8 The chassis intrusion connector is for a chassis intrusion detection sensor or switch that detects if a chassis component is removed or replaced.
PAGE 40
SPCIE-C2260-i2 PICMG 1.3 CPU Card 3.2.5 DDR3 DIMM Slots CN Label: CHA_DIMM1, CHA_DIMM2, CHB_DIMM1, CHB_DIMM2 CN Type: DDR3 DIMM slot CN Location: See Figure 3-6 8 The DIMM slots are for DDR3 DIMM memory modules. Figure 3-6: DDR3 DIMM Slot Locations 3.2.6 Digital I/O Connector CN Label: DIO1 CN Type: 10-pin header CN Location: See Figure 3-7 CN Pinouts: See Table 3-7 The digital I/O connector provides programmable input and output for external devices.
PAGE 41
SPCIE-C2260-i2 PICMG 1.3 CPU Card Pin Description Pin Description 1 GND 2 VCC 3 Output 3 4 Output 2 5 Output 1 6 Output 0 7 Input 3 8 Input 2 9 Input 1 10 Input 0 Table 3-7: Digital I/O Connector Pinouts 3.2.7 EC Debug Connector CN Label: CN3 CN Type: 18-pin header CN Location: See Figure 3-8 CN Pinouts: See Table 3-8 The EC debug connector is used for EC debug.
PAGE 42
SPCIE-C2260-i2 PICMG 1.3 CPU Card Pin Description Pin Description 15 EC_EPP_PD6 16 EC_EPP_KSI5 17 EC_EPP_PD7 18 EC_EPP_KSI4 Table 3-8: EC Debug Connector Pinouts 3.2.8 Fan Connector (CPU) CN Label: CPU_FAN1 CN Type: 4-pin wafer CN Location: See Figure 3-9 CN Pinouts: See Table 3-9 The fan connector attaches to a CPU cooling fan.
PAGE 43
SPCIE-C2260-i2 PICMG 1.3 CPU Card 3.2.9 Fan Connector (System) CN Label: SYS_FAN1 CN Type: 3-pin wafer CN Location: See Figure 3-10 CN Pinouts: See Table 3-10 The fan connector attaches to a system cooling fan. Figure 3-10: System Fan Connector Location Pin Description 1 FANIO 2 +12V (PWM) 3 GND Table 3-10: System Fan Connector Pinouts 3.2.
PAGE 44
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 3-11: Front Panel Connector Location Function Power LED Power Button HDD LED Pin Description Function Pin Description 1 +5V Speaker 2 BEEP_PWR 3 NC 4 IPMI ID_LED+ 5 GND 6 IPMI ID_LED- 7 PWRBTN_SW# 8 PC_BEEP 9 GND 10 NC 11 +5V 12 EXTRST- 13 SATA_LED# 14 GND IPMI LED Speaker Reset Table 3-11: Front Panel Connector Pinouts 3.2.
PAGE 45
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 3-12: Internal DisplayPort Connector Location Pin Description Pin Description 1 +5V 11 AUXP 2 LANE1N 12 AUXN 3 LANE1P 13 GND 4 GND 14 LANE2P 5 LANE3N 15 LANE2N 6 LANE3P 16 GND 7 GND 17 LANE0P 8 AUX_CTRL_DET_D 18 LANE0N 9 GND 19 +3.3V 10 HPD Table 3-12: Internal DisplayPort Connector Pinouts 3.2.
PAGE 46
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 3-13: Infrared Connector Location Pin Description 1 +5V 2 NC 3 IRRX 4 GND 5 IRTX Table 3-13: Infrared Connector Pinouts 3.2.13 iRIS Module Slot CN Label: IPMI1 CN Type: iRIS module slot CN Location: See Figure 3-14 The iRIS module slot allows installation of the iRIS-2400 module.
PAGE 47
SPCIE-C2260-i2 PICMG 1.3 CPU Card WARNING: The iRIS module slot is designed to install the iRIS-2400 module only. DO NOT install other modules into the iRIS module slot. Doing so may cause damage to the SPCIE-C2260-i2. 3.2.14 Keyboard and Mouse Connector CN Label: KB_MS1 CN Type: 6-pin wafer CN Location: See Figure 3-15 CN Pinouts: See Table 3-14 The keyboard and mouse connector connects to a PS/2 Y-cable that can be connected to a PS/2 keyboard and mouse.
PAGE 48
SPCIE-C2260-i2 PICMG 1.3 CPU Card 3.2.15 LAN LED Connectors CN Label: LED_LAN1, LED_LAN2 CN Type: 2-pin header CN Location: See Figure 3-16 CN Pinouts: See Table 3-15 and Table 3-16 8 8 The LAN LED connectors are used to connect to the LAN LED indicators on the chassis to indicate users the link activities of the two LAN ports. Figure 3-16: LAN LED Connector Locations Pin Description 1 +3.3V 2 LAN1_LED_LINK#_ACT Table 3-15: LAN1 LED Connector (LED_LAN1) Pinouts Pin Description 1 +3.
PAGE 49
SPCIE-C2260-i2 PICMG 1.3 CPU Card The parallel port connector connects to a parallel port connector interface or some other parallel port device such as a printer.
PAGE 50
SPCIE-C2260-i2 PICMG 1.3 CPU Card 3.2.17 PCIe Mini Card Slot CN Label: CN4 CN Type: PCIe Mini card slot CN Location: See Figure 3-18 CN Pinouts: See Table 3-18 8 The PCIe Mini card slot is for installing a PCIe Mini expansion card. Figure 3-18: PCIe Mini Card Slot Location Pin Description Pin Description 1 PCIE_WAKE# 2 +3.3V 3 N/C 4 GND 5 N/C 6 1.
PAGE 51
SPCIE-C2260-i2 PICMG 1.3 CPU Card Pin Description Pin Description 35 GND 36 USB_DATA- 37 GND 38 USB_DATA+ 39 +3.3V 40 GND 41 +3.3V 42 N/C 43 +3.3V 44 N/C 45 CLINK_CLK 46 N/C 47 CLINK_DATA 48 1.5V 49 CLINK_RST# 50 GND 51 MSATA_DET 52 +3.3V Table 3-18: PCIe Mini Card Slot Pinouts 3.2.
PAGE 52
SPCIE-C2260-i2 PICMG 1.3 CPU Card Pin Description 1 GND 2 SATA_TX+ 3 SATA_TX- 4 GND 5 SATA_RX- 6 SATA RX+ 7 GND Table 3-19: SATA 6Gb/s Drive Connector Pinouts 3.2.19 Serial Port Connectors, RS-232 CN Label: COM1, COM3, COM4, COM5 CN Type: 10-pin box header CN Location: See Figure 3-20 CN Pinouts: See Table 3-20 Each of these connectors provides RS-232 connections.
PAGE 53
SPCIE-C2260-i2 PICMG 1.3 CPU Card Pin Description Pin Description 1 DCD 2 DSR 3 RXD 4 RST 5 TXD 6 CTS 7 DTR 8 RI 9 GND 10 GND Table 3-20: RS-232 Serial Port Connector Pinouts 3.2.20 Serial Port Connector, RS-422/485 CN Label: COM2 CN Type: 4-pin wafer CN Location: See Figure 3-21 CN Pinouts: See Table 3-21 This connector provides RS-422 or RS-485 communications.
PAGE 54
SPCIE-C2260-i2 PICMG 1.3 CPU Card RS-422 Pinouts RS-485 Pinouts Table 3-22: DB-9 RS-422/485 Pinouts 3.2.21 SMBus Connector CN Label: CN2 CN Type: 4-pin wafer CN Location: See Figure 3-22 CN Pinouts: See Table 3-23 The SMBus (System Management Bus) connector provides low-speed system management communications.
PAGE 55
SPCIE-C2260-i2 PICMG 1.3 CPU Card 3.2.22 SPI Flash Connector CN Label: JSPI1 CN Type: 8-pin header CN Location: See Figure 3-23 CN Pinouts: See Table 3-24 The SPI flash connector is used to flash the SPI ROM. Figure 3-23: SPI Flash Connector Location Pin Description Pin Description 1 +3.3V 2 SPI_CS# 3 SPI_SO 4 NC 5 GND 6 SPI_CLK 7 SPI_SI 8 NC Table 3-24: SPI Flash Connector Pinouts 3.2.
PAGE 56
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 3-24: SPI EC Flash Connector Location Pin Description Pin Description 1 +3.3V 2 SPI_CS# 3 SPI_SO 4 NC 5 GND 6 SPI_CLK 7 SPI_SI 8 NC Table 3-25: SPI EC Flash Connector Pinouts 3.2.24 TPM Connector CN Label: TPM1 CN Type: 20-pin header CN Location: See Figure 3-25 CN Pinouts: See Table 3-26 The TPM connector connects to a TPM module.
PAGE 57
SPCIE-C2260-i2 PICMG 1.3 CPU Card Pin Description Pin Description 1 LCLK 2 GND 3 LFRAME# 4 KEY 5 LRERST# 6 +5V 7 LAD3 8 LAD2 9 +3.3V 10 LAD1 11 LAD0 12 GND 13 SCL 14 SDA 15 SB3V 16 SERIRQ 17 GND 18 GLKRUN# 19 LPCPD# 20 LDRQ# Table 3-26: TPM Connector Pinouts 3.2.25 USB 2.0 Connectors CN Label: USB1, USB2 CN Type: 8-pin header CN Location: See Figure 3-26 CN Pinouts: See Table 3-27 The USB 2.0 connectors connect to USB 2.0 devices.
PAGE 58
SPCIE-C2260-i2 PICMG 1.3 CPU Card Pin Description Pin Description 5 USB_DATA+ 6 USB_DATA- 7 GND 8 VCC Table 3-27: USB 2.0 Connector Pinouts 3.2.26 USB 3.0 Connector CN Label: CN7 CN Type: 19-pin box header CN Location: See Figure 3-27 CN Pinouts: See Table 3-28 The USB 3.0 connector connects to USB 3.0 devices. This connector provides two USB 3.0 ports. Figure 3-27: USB 3.
PAGE 59
SPCIE-C2260-i2 PICMG 1.3 CPU Card 3.3 External Peripheral Interface Connector Panel The figure below shows the external peripheral interface connector (EPIC) panel. The EPIC panel consists of the following: Figure 3-28: External Peripheral Interface Connector 3.3.1 Ethernet Connectors CN Label: LAN1, LAN2 CN Type: RJ-45 CN Location: See Figure 3-28 CN Pinouts: See Figure 3-29 and Table 3-29 The SPCIE-C2260-i2 is equipped with two built-in RJ-45 Ethernet controllers.
PAGE 60
SPCIE-C2260-i2 PICMG 1.3 CPU Card LED Description LED Description A on: linked B off: 10 Mb/s blinking: data is being sent/received green: 100 Mb/s orange: 1000 Mb/s Table 3-30: Connector LEDs 3.3.2 USB 3.0 Connectors CN Label: CN5, CN6 CN Type: USB port CN Location: See Figure 3-28 CN Pinouts: See Table 3-31 The SPCIE-C2260-i2 has two external USB 3.0 ports.
PAGE 61
SPCIE-C2260-i2 PICMG 1.
PAGE 62
SPCIE-C2260-i2 PICMG 1.
PAGE 63
SPCIE-C2260-i2 PICMG 1.3 CPU Card 4.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the SPCIE-C2260-i2 may result in permanent damage to the SPCIE-C2260-i2 and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the SPCIE-C2260-i2. Dry climates are especially susceptible to ESD.
PAGE 64
SPCIE-C2260-i2 PICMG 1.3 CPU Card WARNING: The installation instructions described in this manual should be carefully followed in order to prevent damage to the components and injury to the user. Before and during the installation please DO the following: Read the user manual: o The user manual provides a complete description of the SPCIE-C2260-i2 installation instructions and configuration options. Wear an electrostatic discharge cuff (ESD): o Electronic components are easily damaged by ESD.
PAGE 65
SPCIE-C2260-i2 PICMG 1.3 CPU Card 4.2.1 Socket LGA1150 CPU Installation WARNING: CPUs are expensive and sensitive components. When installing the CPU please be careful not to damage it in anyway. Make sure the CPU is installed properly and ensure the correct cooling kit is properly installed. DO NOT touch the pins at the bottom of the CPU. When handling the CPU, only hold it on the sides. To install the CPU, follow the steps below.
PAGE 66
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 4-2: Remove Protective Cover Step 3: Inspect the CPU socket. Make sure there are no bent pins and make sure the socket contacts are free of foreign material. If any debris is found, remove it with compressed air. Step 4: Orientate the CPU properly. The contact array should be facing the CPU socket. WARNING: DO NOT touch the pins at the bottom of the CPU. When handling the CPU, only hold it on the sides. Step 5: Correctly position the CPU.
PAGE 67
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 7: Insert the CPU. Gently insert the CPU into the socket. If the CPU pins are properly aligned, the CPU should slide into the CPU socket smoothly. See Figure 4-3. Figure 4-3: Insert the Socket LGA1150 CPU Step 8: Close the CPU socket. Close the load plate and pull the load lever back a little to have the load plate be able to secure to the knob. Engage the load lever by pushing it back to its original position (Figure 4-4).
PAGE 68
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 9: Connect the 12 V power to the board. Connect the 12 V power from the power supply to the board. Step 0: 4.2.2 Socket LGA1150 Cooling Kit Installation WARNING: DO NOT attempt to install a push-pin cooling fan. The pre-installed support bracket prevents the board from bending and is ONLY compatible with captive screw type cooling fans. The cooling kit can be bought from IEI. The cooling kit has a heat sink and fan.
PAGE 69
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 4-5: Cooling Kit Support Bracket Step 2: Place the cooling kit onto the socket LGA1150 CPU. Make sure the CPU cable can be properly routed when the cooling kit is installed. Step 3: Mount the cooling kit. Gently place the cooling kit on top of the CPU. Make sure the four threaded screws on the corners of the cooling kit properly pass through the holes of the cooling kit bracket.
PAGE 70
SPCIE-C2260-i2 PICMG 1.3 CPU Card 4.2.3 DIMM Installation To install a DIMM, please follow the steps below and refer to Figure 4-6. Figure 4-6: DIMM Installation Step 1: Open the DIMM socket handles. Open the two handles outwards as far as they can. See Figure 4-6. Step 2: Align the DIMM with the socket. Align the DIMM so the notch on the memory lines up with the notch on the memory socket. See Figure 4-6. Step 3: Insert the DIMM. Once aligned, press down until the DIMM is properly seated.
PAGE 71
SPCIE-C2260-i2 PICMG 1.3 CPU Card 4.3 System Configuration The system configuration should be performed before installation. 4.3.1 AT/ATX Power Mode Setting The AT and ATX power mode selection is made through the AT/ATX power mode switch which is shown in Figure 4-7. Figure 4-7: AT/ATX Power Mode Switch Location Setting Description 1-2 (down) ATX power mode (default) 2-3 (up) AT power mode Table 4-1: AT/ATX Power Mode Switch Settings 4.3.
PAGE 72
SPCIE-C2260-i2 PICMG 1.3 CPU Card 4.3.3 Flash Descriptor Security Override The Flash Descriptor Security Override jumper specifies whether to override the flash descriptor. Setting Description Short 1-2 No override (default) Short 2-3 Override Table 4-2: Flash Descriptor Security Override Jumper Settings Figure 4-9: Flash Descriptor Security Override Jumper Location 4.3.
PAGE 73
SPCIE-C2260-i2 PICMG 1.3 CPU Card 4.3.5 PCIe x16 Interface Setup The SPCIE-C2260-i2 supports one PCIe x16 interface on the backplane. The PCIe x16 interface setup is made through the BIOS menu in “Chipset Æ PCH-IO Configuration”. Use the PCIEX16 Power BIOS option to configure the PCIe x16 channel mode. Options Description 1 x16 PCIE Sets the PCIe x16 slot as one PCIe x16.
PAGE 74
SPCIE-C2260-i2 PICMG 1.3 CPU Card 4.4 Chassis Installation 4.4.1 Airflow WARNING: Airflow is critical to the cooling of the CPU and other onboard components. The chassis in which the SPCIE-C2260-i2 must have air vents to allow cool air to move into the system and hot air to move out. The SPCIE-C2260-i2 must be installed in a chassis with ventilation holes on the sides allowing airflow to travel through the heat sink surface.
PAGE 75
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 2: Insert the cable connectors. Insert one connector into each serial port box headers (Figure 4-11). A key on the front of the cable connectors ensures the connector can only be installed in one direction. Figure 4-11: Dual RS-232 Cable Installation Step 3: Secure the bracket. The dual RS-232 connector has two D-sub 9 male connectors secured on a bracket. To secure the bracket to the chassis please refer to the reference material that came with the chassis. 4.5.
PAGE 76
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 4-12: iRIS Module Installation Step 1: Locate the iRIS module slot. Place the SPCIE-C2260-i2 on an anti-static pad. Step 2: Align the iRIS-2400 module with the iRIS module slot. Align the notch on the module with the notch on the iRIS module slot. Step 3: Insert the iRIS-2400 module. Push the module in at a 20º angle (Figure 4-12). Step 4: Seat the iRIS-2400 module. Gently push downwards and the arms clip into place (Figure 4-12).
PAGE 77
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 2: Insert the cable connector. Insert the cable connector into the on-board SATA drive connector until it clips into place. See Figure 4-13. Figure 4-13: SATA Drive Cable Connection Step 3: Connect the cable to the SATA disk. Connect the connector on the other end of the cable to the connector at the back of the SATA drive. See Figure 4-14. Step 4: Connect the SATA power cable. Connect the SATA power connector to the back of the SATA drive. See Figure 4-14.
PAGE 78
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 4-14: SATA Power Drive Connection 4.5.4 USB Cable (Dual Port) with Slot Bracket The SPCIE-C2260-i2 is shipped with a dual port USB 2.0 cable. To connect the USB cable connector, please follow the steps below. Step 1: Locate the connectors. The locations of the USB connectors are shown in Chapter 3. WARNING: If the USB pins are not properly aligned, the USB device can burn out. Step 2: Align the connectors. The cable has two connectors.
PAGE 79
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 3: Insert the cable connectors. Once the cable connectors are properly aligned with the USB connectors on the SPCIE-C2260-i2, connect the cable connectors to the on-board connectors. See Figure 4-15. Figure 4-15: Dual USB Cable Connection Step 4: Attach the bracket to the chassis. The USB 2.0 connectors are attached to a bracket. To secure the bracket to the chassis please refer to the installation instructions that came with the chassis. Step 0: 4.5.
PAGE 80
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 4-16: Remove the Retention Screws for the PCIe Mini Card Step 3: Insert into the socket at an angle. Line up the notch on the card with the notch on the connector. Slide the PCIe Mini card into the socket at an angle of about 20º (Figure 4-17). 8 Figure 4-17: Insert the PCIe Mini Card into the Socket at an Angle Step 4: Secure the PCIe Mini card. Secure the PCIe Mini card with the retention screws previously removed (Figure 4-18).
PAGE 81
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 4-18: Secure the PCIe Mini Card 4.6 External Peripheral Interface Connection This section describes connecting devices to the external connectors on the SPCIE-C2260-i2. 4.6.1 LAN Connection There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection to an external network. To connect a LAN cable with an RJ-45 connector, please follow the instructions below. Step 1: Locate the RJ-45 connectors.
PAGE 82
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 4-19: LAN Connection Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN cable RJ-45 connector into the on-board RJ-45 connector. Step 0: 4.6.2 USB Device Connection (Single Connector) There are two external USB 3.0 connectors. Both connectors are perpendicular to the SPCIE-C2260-i2. To connect a USB device, please follow the instructions below. Step 1: Located the USB connectors.
PAGE 83
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 4-20: USB Device Connection Step 3: Insert the device connector. Once aligned, gently insert the USB device connector into the on-board connector. Step 0: 4.6.3 VGA Monitor Connection The SPCIE-C2260-i2 has a single female DB-15 connector on the external peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor to the SPCIE-C2260-i2, please follow the instructions below. Step 1: Locate the female DB-15 connector.
PAGE 84
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 4-21: VGA Connector Step 4: Secure the connector. Secure the DB-15 VGA connector from the VGA monitor to the external interface by tightening the two retention screws on either side of the connector. Step 0: 4.7 Intel® AMT Setup Procedure The SPCIE-C2260-i2 is featured with the Intel® Active Management Technology (AMT). To enable the Intel® AMT function, follow the steps below. Step 1: Make sure the DIMM socket is installed with one DDR3 memory.
PAGE 85
SPCIE-C2260-i2 PICMG 1.3 CPU Card process. Enter the Intel® current ME password as it requires (the Intel® default password is admin). Step 0: NOTE: To change the password, enter a new password following the strong password rule (containing at least one upper case letter, one lower case letter, one digit and one special character, and be at least eight characters). 4.
PAGE 86
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 1: Obtain the IP address of the managed system. It is recommended to use the IPMI Tool on the managed system to obtain the IP address. To use IPMI Tool to obtain IP address, follow the steps below: a. Copy the Ipmitool.exe file to a bootable USB flash drive. b. Insert the USB flash drive to the SPCIE-C2260-i2 c. The SPCIE-C2260-i2 boots from the USB flash drive d.
PAGE 87
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 4-23: IEI iMAN Web GUI NOTE: To understand how to use the IEI iMAN Web GUI, please refer to the iRIS-2400 Web GUI user manual in the utility CD came with the SPCIE-C2260-i2. The user manual describes each function in detail.
PAGE 88
SPCIE-C2260-i2 PICMG 1.
PAGE 89
SPCIE-C2260-i2 PICMG 1.3 CPU Card 5.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. NOTE: Some of the BIOS options may vary throughout the life cycle of the product and are subject to change without prior notice. 5.1.1 Starting Setup The UEFI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways. 1.
PAGE 90
SPCIE-C2260-i2 PICMG 1.3 CPU Card Key Function - Decrease the numeric value or make changes Page Up Move to the previous page Page Dn Move to the next page Esc Main Menu – Quit and not save changes into CMOS Status Page Setup Menu and Option Page Setup Menu -Exit current page and return to Main Menu F1 General help, only for Status Page Setup Menu and Option Page Setup Menu F2 Load previous values F3 Load optimized defaults F4 Save changes and Exit BIOS Table 5-1: BIOS Navigation Keys 5.
PAGE 91
SPCIE-C2260-i2 PICMG 1.3 CPU Card Security – Sets User and Supervisor Passwords. Save & Exit – Selects exit options and loads default settings The following sections completely describe the configuration options found in the menu items at the top of the BIOS screen and listed above.
PAGE 92
SPCIE-C2260-i2 PICMG 1.3 CPU Card 5.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit BIOS Information BIOS Vendor Core Version Compliancy Project Version Build Date and Time American Megatrends 4.6.5.4 UEFI 2.3.1; PI 1.2 B273AR03.
PAGE 93
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î System Overview The system overview lists a brief summary of the BIOS. The fields in system overview cannot be changed. The items shown in the system overview include: BIOS Information Processor Information Memory Information PCH Information SPI Clock Frequency The Main menu has two user configurable fields: Î System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year.
PAGE 94
SPCIE-C2260-i2 PICMG 1.3 CPU Card Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
PAGE 95
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î ACPI Sleep State [S1 only (CPU Stop Clock)] Use the ACPI Sleep State option to specify the sleep state the system enters when it is not being used. Î Suspend Disabled Î S1 only (CPU Stop Clock) DEFAULT The system enters S1(POS) sleep state. The system appears off. The CPU is stopped; RAM is refreshed; the system is running in a low power mode. Î S3 only (Suspend The caches are flushed and the CPU is powered to RAM) off. Power to the RAM is maintained.
PAGE 96
SPCIE-C2260-i2 PICMG 1.3 CPU Card Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced Wake system with Fixed Time [Disabled] Enable or disable System wake on alarm event. When enabled, System will wake on the date::hr::min::sec specified ---------------------- ÆÅ: Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
PAGE 97
SPCIE-C2260-i2 PICMG 1.3 CPU Card 5.3.3 Trusted Computing Use the Trusted Computing menu (BIOS Menu 5) to configure settings related to the Trusted Computing Group (TCG) Trusted Platform Module (TPM). Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced Configuration Security Device Support [Disable] Current Status Information NO Security Device Found Enables or Disables BIOS support for security device. O.S. will not show Security Device.
PAGE 98
SPCIE-C2260-i2 PICMG 1.3 CPU Card Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced CPU Configuration Intel(R) Xeon(R) CPU 0000 @ 2.
PAGE 99
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î Disabled Î Enabled DEFAULT Disables Intel Virtualization Technology. Enables Intel Virtualization Technology. 5.3.5 SATA Configuration Use the SATA Configuration menu (BIOS Menu 7) to change and/or set the configuration of the SATA devices installed in the system. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced SATA Controller(s) SATA Mode Selection [Enabled] [IDE] Enable or disable SATA Device.
PAGE 100
SPCIE-C2260-i2 PICMG 1.3 CPU Card 5.3.6 Intel(R) Rapid Start Technology Use the Intel(R) Rapid Start Technology (BIOS Menu 8) menu to configure Intel® Rapid Start Technology support. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced Intel(R) Rapid Start Technology [Disabled] Enable or disable Intel(R) Rapid Start Technology --------------------ÆÅ: Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt.
PAGE 101
SPCIE-C2260-i2 PICMG 1.3 CPU Card 5.3.7 AMT Configuration The AMT Configuration menu (BIOS Menu 9) allows the Intel® AMT options to be configured. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced Intel AMT Un-Configure ME [Enabled] [Disabled] Enable/Disable Intel (R) Active Management Technology BIOS Extension. Note: iAMT H/W is always enabled. This option just controls the BIOS extension execution. If enabled, this requires additional firmware in the SPI device.
PAGE 102
SPCIE-C2260-i2 PICMG 1.3 CPU Card 5.3.8 USB Configuration Use the USB Configuration menu (BIOS Menu 10) to read USB configuration information and configure the USB settings. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced USB Configuration USB Devices: 1 Keyboard, 2 Hubs Legacy USB Support [Enabled] Enables Legacy USB support. AUTO option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications.
PAGE 103
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î Disabled Legacy USB support disabled Î Auto Legacy USB support disabled if no USB devices are connected 5.3.9 F81866 Super IO Configuration Use the F81866 Super IO Configuration menu (BIOS Menu 11) to set or change the configurations for the parallel ports and serial ports. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
PAGE 104
SPCIE-C2260-i2 PICMG 1.3 CPU Card 5.3.9.1 Serial Port n Configuration Use the Serial Port n Configuration menu (BIOS Menu 12) to configure the serial port n. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced Serial Port n Configuration Serial Port Device Settings Enable or Disable Serial Port (COM) [Enabled] IO=3F8h; IRQ=4 --------------------ÆÅ: Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt.
PAGE 105
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î Î Î IO=3F8h; Serial Port I/O port address is 3F8h and the interrupt IRQ=3, 4 address is IRQ3, 4 IO=2C0h; Serial Port I/O port address is 2C0h and the interrupt IRQ=3, 4 address is IRQ3, 4 IO=2C8h; Serial Port I/O port address is 2C8h and the interrupt IRQ=3, 4 address is IRQ3, 4 5.3.9.1.2 Serial Port 2 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port.
PAGE 106
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î Device Mode [RS422/485] The serial port 2 is set to RS-422/485 mode. 5.3.9.1.3 Serial Port 3 Configuration Î Serial Port [Enabled] Use the Serial Port option to enable or disable the serial port. Î Î Disabled Î Enabled Disable the serial port DEFAULT Enable the serial port Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address.
PAGE 107
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î Change Settings [Auto] Use the Change Settings option to change the serial port IO port address and interrupt address. Î Auto DEFAULT The serial port IO port address and interrupt address are automatically detected.
PAGE 108
SPCIE-C2260-i2 PICMG 1.
PAGE 109
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î Î Disabled Î Enabled Disable the parallel port DEFAULT Enable the parallel port Change Settings [Auto] Use the Change Settings option to change the parallel port IO port address and interrupt address. Î Auto DEFAULT The parallel port IO port address and interrupt address are automatically detected.
PAGE 110
SPCIE-C2260-i2 PICMG 1.3 CPU Card 5.3.10 F81866 H/W Monitor The F81866 H/W Monitor menu (BIOS Menu 14) contains the fan configuration submenu, and displays the system temperature and CPU fan speed. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Advanced PC Health Status Smart Fan Mode Select > Smart Fan Mode Configuration CPU Temperature System Temperature CPU_FAN1 Speed SYS_FAN1 Speed V_CPU_CORE +5V +12V V_SM VSB5V VCC3V VSB3V VBAT :+40 C :+36 C :1664 RPM :N/A :+1.
PAGE 111
SPCIE-C2260-i2 PICMG 1.3 CPU Card o o o o VSB5V VCC3V VSB3V VBAT 5.3.10.1 Smart Fan Mode Configuration Use the Smart Fan Mode Configuration submenu (BIOS Menu 15) to configure fan 1 temperature and speed settings. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
PAGE 112
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î Fan start/off temperature Use the + or – key to change the Fan start/off temperature value. Enter a decimal number between 1 and 100. Î Fan start PWM Use the + or – key to change the Fan start PWM value. Enter a decimal number between 1 and 128. Î Fan slope PWM Use the + or – key to change the Fan slope PWM value. Enter a decimal number between 1 and 64. 5.3.
PAGE 113
SPCIE-C2260-i2 PICMG 1.3 CPU Card Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
PAGE 114
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î Î VT-UTF8 Î ANSI The target terminal type is VT-UTF8 DEFAULT The target terminal type is ANSI Bits per second [115200] Use the Bits per second option to specify the serial port transmission speed. The speed must match the other side. Long or noisy lines may require lower speeds. Î Î 9600 Sets the serial port transmission speed at 9600. Î 19200 Sets the serial port transmission speed at 19200. Î 57600 Sets the serial port transmission speed at 57600.
PAGE 115
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î Stop Bits [1] Use the Stop Bits option to specify the number of stop bits used to indicate the end of a serial data packet. Communication with slow devices may require more than 1 stop bit. Î 1 Î 2 DEFAULT Sets the number of stop bits at 1. Sets the number of stop bits at 2. 5.3.12 iEi Feature Use the iEi Feature menu (BIOS Menu 17) to configure One Key Recovery function. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
PAGE 116
SPCIE-C2260-i2 PICMG 1.3 CPU Card 5.4 Chipset Use the Chipset menu (BIOS Menu 18) to access the PCH IO and System Agent (SA) configuration menus. WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
PAGE 117
SPCIE-C2260-i2 PICMG 1.3 CPU Card 5.4.1 PCH-IO Configuration Use the PCH-IO Configuration menu (BIOS Menu 19) to configure the PCH parameters. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Chipset Auto Power Button Status [Disabled (ATX)] Restore AC Power Loss [Last State] > PCI Express Configuration > PCH Azalia Configuration Select AC power state when power is re-applied after a power failure.
PAGE 118
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î PCIEX16 Power [1 x16 PCIE] Use the PCIEX16 Power BIOS option to configure the PCIe x16 channel mode on the backplane. Î Î 1 x16 PCIE Î 2 x8 PCIE Sets the PCIe x16 slot as two PCIe x8 Î 1 x8, 2 x4 PCIE Sets the PCIe x16 slot as one PCIe x8 or two PCIe x4 DEFAULT Sets the PCIe x16 slot as one PCIe x16 USB SW1 Power [+5V DUAL] Use the USB SW1 Power BIOS option to configure the USB power source for the external USB 3.0 ports.
PAGE 119
SPCIE-C2260-i2 PICMG 1.3 CPU Card 5.4.1.1 PCI Express Configuration Use the PCI Express Configuration menu (BIOS Menu 20) to configure the PCI Express slots. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Chipset PCI Express Configuration > > > > > PCI PCI PCI PCI PCI Express Express Express Express Express Root Root Root Root Root Port Port Port Port Port PCI Express Root Port 2 Settings.
PAGE 120
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î PCIe Speed [Gen1] Use this option to select the support type of the PCI Express ports. The following options are available: Î Auto Gen1 Gen2 Default Detect Non-Compliance Device [Enabled] Use the Detect Non-Compliance Device option to enable or disable detecting if a non-compliance PCI Express device is connected to the PCI Express port. Î Disables to detect if a non-compliance PCI Disabled Express device is connected to the PCI Express port.
PAGE 121
SPCIE-C2260-i2 PICMG 1.3 CPU Card Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit PCH Azalia Configuration Azalia Control Detection of the Azalia device. Disabled = Azalia will be unconditionally disabled Enabled = Azalia will be unconditionally Enabled [Enabled] --------------------ÆÅ: Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt.
PAGE 122
SPCIE-C2260-i2 PICMG 1.3 CPU Card Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Chipset VT-d [Disabled] Check to enable VT-d function on MCH. > Graphics Configuration > NB PCIe Configuration > Memory Configuration --------------------ÆÅ: Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
PAGE 123
SPCIE-C2260-i2 PICMG 1.3 CPU Card Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Chipset Graphics Configuration Primary Display DVMT Pre-Allocated DVMT Total Gfx Mem > LCD Control [Auto] [256M] [MAX] Select which of IGFX/PEG/PCI Graphics device should be Primary Display Or select SG for Switchable Gfx. ---------------------ÆÅ: Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.
PAGE 124
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î DVMT Total Gfx Mem [MAX] Use the DVMT Total Gfx Mem option to select DVMT5.0 total graphic memory size used by the internal graphic device. The following options are available: 128M 256M MAX Default 5.4.2.1.1 LCD Control Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Chipset LCD Control Primary IGFX Boot Display [VBIOS Default] Select the Video Device which will be activated during POST. This has no effect if external graphics present.
PAGE 125
SPCIE-C2260-i2 PICMG 1.3 CPU Card 5.4.2.2 NB PCIe Configuration Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Chipset NB PCIe Configuration PEG0 PEG0 – Gen X Not Present [Auto] Enable PEG Detect Non-compliance Device [Enabled] [Enabled] Configure PEG0 B0:D1:F0 Gen1-Gen3 (PCIEX16_1 Slot) ---------------------ÆÅ: Select Screen ↑ ↓: Select Item Enter: Select +/-: Change Opt. F1: General Help F2: Previous Values F3: Optimized Defaults F4: Save & Exit ESC: Exit Version 2.15.1236.
PAGE 126
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î Detect Non-Compliance Device [Enabled] Use the Detect Non-Compliance Device option to enable or disable detecting if a non-compliance PCI Express device is connected to the PCI Express port. Î Disables to detect if a non-compliance PCI Disabled Express device is connected to the PCI Express port. Î Enabled DEFAULT Enables to detect if a non-compliance PCI Express device is connected to the PCI Express port. 5.4.2.
PAGE 127
SPCIE-C2260-i2 PICMG 1.3 CPU Card 5.5 Boot Use the Boot menu (BIOS Menu 28) to configure system boot options. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc.
PAGE 128
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î Quiet Boot [Enabled] Use the Quiet Boot BIOS option to select the screen display when the system boots. Î Î Disabled Î Enabled Normal POST messages displayed DEFAULT OEM Logo displayed instead of POST messages Fast Boot [Disabled] Use the Fast Boot BIOS option to enable or disable the fast boot function.
PAGE 129
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î Launch PXE OpROM [Disabled] Use the Launch PXE OpROM option to enable or disable boot option for legacy network devices. Î Î Disabled Î Enabled DEFAULT Ignore all PXE Option ROMs Load PXE Option ROMs. UEFI Boot [Disabled] Use the UEFI Boot option to enable or disable to boot from the UEFI devices. Î Enabled Î Disabled Boot from UEFI devices is enabled. DEFAULT Boot from UEFI devices is disabled. 5.
PAGE 130
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î User Password Use the User Password to set or change a user password. 5.7 Save & Exit Use the Safe & Exit menu (BIOS Menu 30) to load default BIOS values, optimal failsafe values and to save configuration changes. Aptio Setup Utility – Copyright (C) 2012 American Megatrends, Inc. Main Advanced Chipset Boot Security Save & Exit Save Changes and Reset Discard Changes and Reset Exit the system after saving the changes.
PAGE 131
SPCIE-C2260-i2 PICMG 1.3 CPU Card Î Save as User Defaults Use the Save as User Defaults option to save the changes done so far as user defaults. Î Restore User Defaults Use the Restore User Defaults option to restore the user defaults to all the setup options.
PAGE 132
SPCIE-C2260-i2 PICMG 1.
PAGE 133
SPCIE-C2260-i2 PICMG 1.3 CPU Card 6.1 Available Software Drivers NOTE: The content of the CD may vary throughout the life cycle of the product and is subject to change without prior notice. Visit the IEI website or contact technical support for the latest updates. The following drivers can be installed on the system: Chipset VGA LAN USB 3.0 Audio Intel® AMT Installation instructions are given below. 6.
PAGE 134
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 6-1: Introduction Screen Step 3: Click SPCIE-C2260. Step 4: A new screen with a list of available drivers appears (Figure 6-2). Figure 6-2: Available Drivers Step 5: Install all of the necessary drivers in this menu.
PAGE 135
SPCIE-C2260-i2 PICMG 1.3 CPU Card 6.3 Chipset Driver Installation To install the chipset driver, please do the following. Step 1: Access the driver list. (See Section 6.2) Step 2: Click “1-Chipset”. Step 3: Locate the setup file and double click on it. Step 4: When the setup files are completely extracted, the Welcome Screen in Figure 6-3 appears. Step 5: Click Next to continue. Figure 6-3: Chipset Driver Welcome Screen Step 6: The license agreement in Figure 6-4 appears.
PAGE 136
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 6-4: Chipset Driver License Agreement Step 9: The Read Me file in Figure 6-5 appears. Step 10: Click Next to continue. Figure 6-5: Chipset Driver Read Me File Step 11: Setup Operations are performed as shown in Figure 6-6. Step 12: Once the Setup Operations are complete, click Next to continue.
PAGE 137
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 6-6: Chipset Driver Setup Operations Step 13: The Finish screen in Figure 6-7 appears. Step 14: Select “Yes, I want to restart this computer now” and click Finish.
PAGE 138
SPCIE-C2260-i2 PICMG 1.3 CPU Card 6.4 Graphics Driver Installation To install the Graphics driver, please do the following. Step 1: Access the driver list. (See Section 6.2) Step 2: Click “2-Graphic” and select the folder which corresponds to the operating system. Step 3: Locate the setup file and double click on it. Step 4: The Welcome Screen in Figure 6-8 appears. Step 5: Click Next to continue. Figure 6-8: Graphics Driver Welcome Screen Step 6: The License Agreement in Figure 6-9 appears.
PAGE 139
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 6-9: Graphics Driver License Agreement Step 8: The Read Me file in Figure 6-10 appears. Click Next to continue. Figure 6-10: Graphics Driver Read Me File Step 9: Setup Operations are performed as shown in Figure 6-11. Step 10: Once the Setup Operations are complete, click Next to continue.
PAGE 140
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 6-11: Graphics Driver Setup Operations Step 11: The Finish screen in Figure 6-12 appears. Step 12: Select “Yes, I want to restart this computer now” and click Finish.
PAGE 141
SPCIE-C2260-i2 PICMG 1.3 CPU Card 6.5 LAN Driver Installation To install the LAN driver, please do the following. Step 1: Access the driver list. (See Section 6.2) Step 2: Click “3-LAN”. Step 3: Select the folder with the driver of correspondent LAN controller. Step 4: Locate the Autorun file and double click on it. Step 5: The Intel® Network Connection menu in Figure 6-13 appears. Step 6: Click Install Drivers and Software.
PAGE 142
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 6-14: LAN Driver Welcome Screen Step 8: Click Next to continue. Step 9: The License Agreement in Figure 6-15 appears. Step 10: Accept the agreement by selecting “I accept the terms in the license agreement”. Step 11: Click Next to continue.
PAGE 143
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 12: The Setup Options screen in Figure 6-16 appears. Step 13: Select program features to install. Step 14: Click Next to continue. Figure 6-16: LAN Driver Setup Options Step 15: The Ready to Install the Program screen in Figure 6-17 appears. Step 16: Click Install to proceed with the installation.
PAGE 144
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 6-17: LAN Driver Installation Step 17: The program begins to install. Step 18: When the driver installation is complete, the screen in Figure 6-18 appears. Step 19: Click Finish to exit.
PAGE 145
SPCIE-C2260-i2 PICMG 1.3 CPU Card 6.6 USB 3.0 Driver Installation WARNING: Do not run this driver’s installer (Setup.exe) from a USB storage device (ie. external USB hard drive or USB thumb drive). For proper installation, please copy driver files to a local hard drive folder and run from there. To install the USB 3.0 driver, please follow the steps below. Step 1: Access the driver list. (See Section 6.2) Step 2: Click “4-USB3.0”. Step 3: Locate the setup file and double click on it.
PAGE 146
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 7: Read the License Agreement. Step 8: Click Yes to continue. Figure 6-20: USB 3.0 Driver License Agreement Step 9: The Read Me file in Figure 6-21 appears. Step 10: Click Next to continue. Figure 6-21: USB 3.
PAGE 147
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 11: Setup Operations are performed as shown in Figure 6-22. Step 12: Once the Setup Operations are complete, click Next to continue. Figure 6-22: USB 3.0 Driver Setup Operations Step 13: The Finish screen in Figure 6-23 appears. Step 14: Select “Yes, I want to restart this computer now” and click Finish.
PAGE 148
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 6-23: USB 3.0 Driver Installation Finish Screen 6.7 Audio Driver Installation To install the audio driver, please do the following. Step 1: Access the driver list. (See Section 6.2) Step 2: Click “5-Audio” and select the folder which corresponds to the operating system. Step 3: Double click the setup file. Step 4: The InstallShield Wizard is prepared to guide the user through the rest of the process.
PAGE 149
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 6-24: InstallShield Wizard Welcome Screen Step 6: Click Next to continue the installation. Step 7: InstallShield starts to install the new software as shown in Figure 6-25. Figure 6-25: Audio Driver Software Configuration Step 8: After the driver installation process is complete, a confirmation screen appears (Figure 6-26).
PAGE 150
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 6-26: Restart the Computer Step 9: The confirmation screen offers the option of restarting the computer now or later. For the settings to take effect, the computer must be restarted. Click Finish to restart the computer. Step 0: 6.
PAGE 151
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 4: When the setup files are completely extracted the Welcome Screen in Figure 6-27 appears. Step 5: Click Next to continue. Figure 6-27: Intel® ME Driver Welcome Screen Step 6: The license agreement in Figure 6-28 appears. Step 7: Read the License Agreement. Step 8: Click Yes to continue.
PAGE 152
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure 6-28: Intel® ME Driver License Agreement Step 9: Setup Operations are performed as shown in Figure 6-29. Step 10: Once the Setup Operations are complete, click Next to continue. Figure 6-29: Intel® ME Driver Setup Operations Step 11: The Finish screen in Figure 6-30 appears. Step 12: Select “Yes, I want to restart this computer now” and click Finish.
PAGE 153
SPCIE-C2260-i2 PICMG 1.
PAGE 154
SPCIE-C2260-i2 PICMG 1.
PAGE 155
SPCIE-C2260-i2 PICMG 1.3 CPU Card Below is a list of BIOS configuration options in the BIOS chapter. System Overview .................................................................................................................76 System Date [xx/xx/xx] ........................................................................................................76 System Time [xx:xx:xx] .......................................................................................................
PAGE 156
SPCIE-C2260-i2 PICMG 1.3 CPU Card Fan slope PWM ....................................................................................................................95 Console Redirection [Disabled] .........................................................................................96 Terminal Type [ANSI]...........................................................................................................96 Bits per second [115200]....................................................................
PAGE 157
SPCIE-C2260-i2 PICMG 1.3 CPU Card Save as User Defaults ...................................................................................................... 114 Restore User Defaults ......................................................................................................
PAGE 158
SPCIE-C2260-i2 PICMG 1.
PAGE 159
SPCIE-C2260-i2 PICMG 1.3 CPU Card B.1 One Key Recovery Introduction The IEI one key recovery is an easy-to-use front end for the Norton Ghost system backup and recovery tool. This tool provides quick and easy shortcuts for creating a backup and reverting to that backup or reverting to the factory default settings.
PAGE 160
SPCIE-C2260-i2 PICMG 1.3 CPU Card After completing the five initial setup procedures as described above, users can access the recovery tool by pressing while booting up the system. The detailed information of each function is described in Section B.5. NOTE: The initial setup procedures for Linux system are described in Section B.3. 71 B.1.1 System Requirement NOTE: The recovery CD can only be used with IEI products.
PAGE 161
SPCIE-C2260-i2 PICMG 1.3 CPU Card partitions. Please take the following table as a reference when calculating the size of the partition. OS OS Image after Ghost Compression Ratio Windows® 7 7 GB 5 GB 70% Windows® XPE 776 MB 560 MB 70% Windows® CE 6.0 36 MB 28 MB 77% NOTE: Specialized tools are required to change the partition size if the operating system is already installed. B.1.
PAGE 162
SPCIE-C2260-i2 PICMG 1.3 CPU Card Linux o o o o o o o o o o o o o o Fedora Core 12 (Constantine) Fedora Core 11 (Leonidas) Fedora Core 10 (Cambridge) Fedora Core 8 (Werewolf) Fedora Core 7 (Moonshine) RedHat RHEL-5.4 RedHat 9 (Ghirke) Ubuntu 8.10 (Intrepid) Ubuntu 7.10 (Gutsy) Ubuntu 6.10 (Edgy) Debian 5.0 (Lenny) Debian 4.0 (Etch) SuSe 11.2 SuSe 10.3 NOTE: Installing unsupported OS versions may cause the recovery tool to fail. B.
PAGE 163
SPCIE-C2260-i2 PICMG 1.3 CPU Card The detailed descriptions are described in the following sections. NOTE: The setup procedures described below are for Microsoft Windows operating system users. For Linux, most of the setup procedures are the same except for several steps described in Section B.3. 71 B.2.1 Hardware and BIOS Setup Step 1: Make sure the system is powered off and unplugged. Step 2: Install a hard drive or SSD in the system. An unformatted and unpartitioned disk is recommended.
PAGE 164
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 2: Boot the system from recovery CD. When prompted, press any key to boot from the recovery CD. It will take a while to launch the recovery tool. Please be patient! Figure B-2: Launching the Recovery Tool Step 3: The recovery tool setup menu is shown as below. Figure B-3: Recovery Tool Setup Menu Step 4: Press <6> then .
PAGE 165
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure B-4: Command Mode Step 5: The command prompt window appears. Type the following commands (marked in red) to create two partitions. One is for the OS installation; the other is for saving recovery files and images which will be an invisible partition.
PAGE 166
SPCIE-C2260-i2 PICMG 1.
PAGE 167
SPCIE-C2260-i2 PICMG 1.3 CPU Card NOTE: Use the following commands to check if the partitions were created successfully. Step 6: Press any key to exit the recovery tool and automatically reboot the system. Please continue to the following procedure: Build the Recovery Partition.Step0: B.2.3 Install Operating System, Drivers and Applications Install the operating system onto the unlabelled partition.
PAGE 168
SPCIE-C2260-i2 PICMG 1.3 CPU Card B.2.4 Build-up Recovery Partition Step 1: Put the recover CD in the optical drive. Step 2: Start the system. Step 3: Boot the system from the recovery CD. When prompted, press any key to boot from the recovery CD. It will take a while to launch the recovery tool. Please be patient! Figure B-6: Launching the Recovery Tool Step 4: When the recovery tool setup menu appears, press <2> then .
PAGE 169
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 5: The Symantec Ghost window appears and starts configuring the system to build a recovery partition. In this process the partition created for recovery files in Section B.2.2 is hidden and the recovery tool is saved in this partition. 71 Figure B-8: Building the Recovery Partition Step 6: After completing the system configuration, press any key in the following window to reboot the system. Figure B-9: Press Any Key to Continue Step 7: Eject the recovery CD.
PAGE 170
SPCIE-C2260-i2 PICMG 1.3 CPU Card B.2.5 Create Factory Default Image NOTE: Before creating the factory default image, please configure the system to a factory default environment, including driver and application installations. To create a factory default image, please follow the steps below. Step 1: Turn on the system. When the following screen displays (Figure B-10), press 71 the key to access the recovery tool.
PAGE 171
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure B-12: About Symantec Ghost Window Step 4: Use mouse to navigate to the option shown below (Figure B-13). 71 Figure B-13: Symantec Ghost Path Step 5: Select the local source drive (Drive 1) as shown in Figure B-14. Then click OK.
PAGE 172
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure B-14: Select a Local Source Drive Step 6: Select a source partition (Part 1) from basic drive as shown in Figure B-15. 71 Then click OK. Figure B-15: Select a Source Partition from Basic Drive Step 7: Select 1.2: [Recovery] NTFS drive and enter a file name called iei (Figure B-16). Click Save. The factory default image will then be saved in the 71 selected recovery drive and named IEI.GHO. WARNING: The file name of the factory default image must be iei.GHO.
PAGE 173
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure B-16: File Name to Copy Image to Step 8: When the Compress Image screen in Figure B-17 prompts, click High to make 71 the image file smaller.
PAGE 174
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 9: The Proceed with partition image creation window appears, click Yes to continue. Figure B-18: Image Creation Confirmation Step 10: The Symantec Ghost starts to create the factory default image (Figure B-19). 71 Figure B-19: Image Creation Complete Step 11: When the image creation completes, a screen prompts as shown in Figure B-20. 71 Click Continue and close the Ghost window to exit the program.
PAGE 175
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 12: The recovery tool main menu window is shown as below. Press any key to reboot the system. Step0: Figure B-21: Press Any Key to Continue B.3 Auto Recovery Setup Procedure The auto recovery function allows a system to automatically restore from the factory default image after encountering a Blue Screen of Death (BSoD) or a hang for around 10 minutes. To use the auto recovery function, follow the steps described in the following sections.
PAGE 176
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 1: Follow the steps described in Section B.2.1 ~ Section B.2.3 to setup BIOS, create partitions and install operating system. Step 2: Install the auto recovery utility into the system by double clicking the Utility/AUTORECOVERY-SETUP.exe in the One Key Recovery CD. This utility MUST be installed in the system, otherwise, the system will automatically restore from the factory default image every ten (10) minutes.
PAGE 177
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 4: Reboot the system from the recovery CD. When prompted, press any key to boot from the recovery CD. It will take a while to launch the recovery tool. Please be patient! Figure B-24: Launching the Recovery Tool Step 5: When the recovery tool setup menu appears, press <4> then . Figure B-25: Auto Recovery Environment for Windows Step 6: The Symantec Ghost window appears and starts configuring the system to build an auto recovery partition.
PAGE 178
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure B-26: Building the Auto Recovery Partition Step 7: After completing the system configuration, the following message prompts to confirm whether to create a factory default image. Type Y to have the system create a factory default image automatically. Type N within 6 seconds to skip this process (The default option is YES). It is suggested to choose YES for this option.
PAGE 179
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 8: The Symantec Ghost starts to create the factory default image (Figure B-28). Figure B-28: Image Creation Complete Step 9: After completing the system configuration, press any key in the following window to restart the system. Figure B-29: Press any key to continue Step 10: Eject the One Key Recovery CD and restart the system. Step 11: Press the key as soon as the system is turned on to enter the BIOS.
PAGE 180
SPCIE-C2260-i2 PICMG 1.3 CPU Card Main Advanced PCIPNP BIOS SETUP UTILITY Boot Security Chipset Exit iEi Feature ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Auto Recovery Function [Enabled] Recover from PXE [Disabled] ↑ ↓ Enter F1 F10 ESC Select Screen Select Item Go to SubScreen General Help Save and Exit Exit v02.61 ©Copyright 1985-2006, American Megatrends, Inc. BIOS Menu 31: IEI Feature Step 13: Save changes and restart the system.
PAGE 181
SPCIE-C2260-i2 PICMG 1.3 CPU Card Partition 1: / Partition 2: SWAP NOTE: Please reserve enough space for partition 3 for saving recovery images. Figure B-30: Partitions for Linux Step 3: Create a recovery partition. Insert the recovery CD into the optical disk drive. Follow Step 1 ~ Step 3 described in Section B.2.2. Then type the following 71 commands (marked in red) to create a partition for recovery images.
PAGE 182
SPCIE-C2260-i2 PICMG 1.3 CPU Card recovery partition. After completing the system configuration, press any key to reboot the system. Eject the recovery CD. Figure B-31: System Configuration for Linux Step 5: Access the recovery tool main menu by modifying the “menu.lst”. To first access the recovery tool main menu, the menu.lst must be modified. In Linux, enter Administrator (root). When prompt appears, type: cd /boot/grub vi menu.lst Figure B-32: Access menu.
PAGE 183
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 7: The recovery tool menu appears. (Figure B-33) 71 Figure B-33: Recovery Tool Menu Step 8: Create a factory default image. Follow Step 2 ~ Step 12 described in Section B.2.5 to create a factory default image. Step 0: 71 B.5 Recovery Tool Functions After completing the initial setup procedures as described above, users can access the recovery tool by pressing while booting up the system. However, if the setup procedure in Section B.
PAGE 184
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure B-34: Recovery Tool Main Menu The recovery tool has several functions including: 1. Factory Restore: Restore the factory default image (iei.GHO) created in Section B.2.5. 71 2. Backup system: Create a system backup image (iei_user.GHO) which will be saved in the hidden partition. 3. Restore your last backup: Restore the last system backup image 4. Manual: Enter the Symantec Ghost window to configure manually. 5. Quit: Exit the recovery tool and restart the system.
PAGE 185
SPCIE-C2260-i2 PICMG 1.3 CPU Card B.5.1 Factory Restore To restore the factory default image, please follow the steps below. Step 1: Type <1> and press in the main menu. Step 2: The Symantec Ghost window appears and starts to restore the factory default. A factory default image called iei.GHO is created in the hidden Recovery partition. Figure B-35: Restore Factory Default Step 3: The screen is shown in Figure B-36 appears when completed. Press any key to 71 reboot the system.
PAGE 186
SPCIE-C2260-i2 PICMG 1.3 CPU Card B.5.2 Backup System To backup the system, please follow the steps below. Step 1: Type <2> and press in the main menu. Step 2: The Symantec Ghost window appears and starts to backup the system. A backup image called iei_user.GHO is created in the hidden Recovery partition. Figure B-37: Backup System Step 3: The screen is shown in Figure B-38 appears when system backup is complete. 71 Press any key to reboot the system.
PAGE 187
SPCIE-C2260-i2 PICMG 1.3 CPU Card B.5.3 Restore Your Last Backup To restore the last system backup, please follow the steps below. Step 1: Type <3> and press in the main menu. Step 2: The Symantec Ghost window appears and starts to restore the last backup image (iei_user.GHO). Figure B-39: Restore Backup Step 3: The screen shown in Figure B-40 appears when backup recovery is complete. 71 Press any key to reboot the system.
PAGE 188
SPCIE-C2260-i2 PICMG 1.3 CPU Card B.5.4 Manual To restore the last system backup, please follow the steps below. Step 1: Type <4> and press in the main menu. Step 2: The Symantec Ghost window appears. Use the Ghost program to backup or recover the system manually. Figure B-41: Symantec Ghost Window Step 3: When backup or recovery is completed, press any key to reboot the system.
PAGE 189
SPCIE-C2260-i2 PICMG 1.3 CPU Card B.6 Restore Systems from a Linux Server through LAN The One Key Recovery allows a client system to automatically restore to a factory default image saved in a Linux system (the server) through LAN connectivity after encountering a Blue Screen of Death (BSoD) or a hang for around 10 minutes. To be able to use this function, the client system and the Linux system MUST reside in the same domain.
PAGE 190
SPCIE-C2260-i2 PICMG 1.3 CPU Card B.6.1 Configure DHCP Server Settings Step 1: Install the DHCP #yum install dhcp (CentOS, commands marked in red) #apt-get install dhcp3-server (Debian, commands marked in blue) Step 2: Confirm the operating system default settings: dhcpd.conf. CentOS Use the following command to show the DHCP server sample location: #vi /etc/dhcpd.conf The DHCP server sample location is shown as below: Use the following command to copy the DHCP server sample to etc/dhcpd.
PAGE 191
SPCIE-C2260-i2 PICMG 1.3 CPU Card filename “pxelinux.0”; Step 0: B.6.2 Configure TFTP Settings Step 1: Install the tftp, httpd and syslinux. #yum install tftp-server httpd syslinux (CentOS) #apt-get install tftpd-hpa xinetd syslinux (Debian) Step 2: Enable the TFTP server by editing the “/etc/xinetd.d/tftp” file and make it use the remap file. The “-vvv” is optional but it could definitely help on getting more information while running the remap file. For example: CentOS #vi /etc/xinetd.
PAGE 192
SPCIE-C2260-i2 PICMG 1.3 CPU Card Debian Replace the TFTP settings from “inetd” to “xinetd” and annotate the “inetd” by adding “#”. #vi /etc/inetd.conf Modify: #tftp dgram udp wait root /usr/sbin....... (as shown below) #vi /etc/xinetd.d/tftp Step 0: B.6.3 Configure One Key Recovery Server Settings Step 1: Copy the Utility/RECOVERYR10.TAR.BZ2 package from the One Key Recovery CD to the system (server side). Step 2: Extract the recovery package to /. #cp RecoveryR10.tar.bz2 / #cd / #tar –xvjf RecoveryR10.
PAGE 193
SPCIE-C2260-i2 PICMG 1.3 CPU Card B.6.4 Start the DHCP, TFTP and HTTP Start the DHCP, TFTP and HTTP. For example: CentOS #service xinetd restart #service httpd restart #service dhcpd restart Debian #/etc/init.d/xinetd reload #/etc/init.d/xinetd restart #/etc/init.d/dhcp3-server restart B.6.5 Create Shared Directory Step 1: Install the samba. #yum install samba Step 2: Create a shared directory for the factory default image. #mkdir /share #cd /share #mkdir /image #cp iei.
PAGE 194
SPCIE-C2260-i2 PICMG 1.3 CPU Card Modify: [image] comment = One Key Recovery path = /share/image browseable = yes writable = yes public = yes create mask = 0644 directory mask = 0755 Step 4: Edit “/etc/samba/smb.conf” for your environment. For example: Step 5: Modify the hostname #vi /etc/hostname Modify: RecoveryServer Step 0: B.6.6 Setup a Client System for Auto Recovery Step 1: Disable the automatically restart function before creating the factory default image.
PAGE 195
SPCIE-C2260-i2 PICMG 1.3 CPU Card Figure B-42: Disable Automatically Restart Step 2: Configure the following BIOS options of the client system. Advanced → iEi Feature → Auto Recovery Function → Enabled Advanced → iEi Feature → Recover from PXE → Enabled Boot → Launch PXE OpROM → Enabled Step 3: Continue to configure the Boot Option Priorities BIOS option of the client system: Boot Option #1 Æ remain the default setting to boot from the original OS. Boot Option #2 Æ select the boot from LAN option.
PAGE 196
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 6: Restart the client system from LAN. If the system encounters a Blue Screen of Death (BSoD) or a hang for around 10 minutes, it will automatically restore from the factory default image. The following screens will show when the system starts auto recovering.
PAGE 197
SPCIE-C2260-i2 PICMG 1.3 CPU Card NOTE: A firewall or a SELinux is not in use in the whole setup process described above. If there is a firewall or a SELinux protecting the system, modify the configuration information to accommodate them. B.7 Other Information B.7.1 Using AHCI Mode or ALi M5283 / VIA VT6421A Controller When the system uses AHCI mode or some specific SATA controllers such as ALi M5283 or VIA VT6421A, the SATA RAID/AHCI driver must be installed before using one key recovery.
PAGE 198
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 5: When the following window appears, press ~~to select “Specify Additional Device”.~~
~~PAGE 199~~
SPCIE-C2260-i2 PICMG 1.3 CPU Card Step 6: In the following window, select a SATA controller mode used in the system. Then press . The user can now start using the SATA HDD. Step 7: After pressing , the system will get into the recovery tool setup menu. Continue to follow the setup procedure from Step 4 in Section B.2.2 Create 71 Partitions to finish the whole setup process.Step0: B.7.
~~PAGE 200~~
~~SPCIE-C2260-i2 PICMG 1.~~
~~PAGE 201~~
SPCIE-C2260-i2 PICMG 1.3 CPU Card AC ’97 Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® in 1997. ACPI Advanced Configuration and Power Interface (ACPI) is an OS-directed configuration, power management, and thermal management interface. AHCI Advanced Host Controller Interface (AHCI) is a SATA Host controller register-level interface. ATA The Advanced Technology Attachment (ATA) interface connects storage devices including hard disks and CD-ROM drives to a computer.
~~PAGE 202~~
SPCIE-C2260-i2 PICMG 1.3 CPU Card DIMM Dual Inline Memory Modules are a type of RAM that offer a 64-bit data bus and have separate electrical contacts on each side of the module. DIO The digital inputs and digital outputs are general control signals that control the on/off circuit of external devices or TTL devices. Data can be read or written to the selected address to enable the DIO functions.
~~PAGE 203~~
SPCIE-C2260-i2 PICMG 1.3 CPU Card LVDS Low-voltage differential signaling (LVDS) is a dual-wire, high-speed differential electrical signaling system commonly used to connect LCD displays to a computer. POST The Power-on Self Test (POST) is the pre-boot actions the system performs when the system is turned-on. RAM Random Access Memory (RAM) is volatile memory that loses data when power is lost. RAM has very fast data transfer rates compared to other storage like hard drives.
~~PAGE 204~~
~~SPCIE-C2260-i2 PICMG 1.~~
~~PAGE 205~~
SPCIE-C2260-i2 PICMG 1.3 CPU Card D.1 Introduction The DIO connector on the SPCIE-C2260-i2 is interfaced to GPIO ports on the Super I/O chipset. The DIO has both 4-bit digital inputs and 4-bit digital outputs. The digital inputs and digital outputs are generally control signals that control the on/off circuit of external devices or TTL devices. Data can be read or written to the selected address to enable the DIO functions.
~~PAGE 206~~
SPCIE-C2260-i2 PICMG 1.3 CPU Card MOV AX, 6F08H Sets the digital port as input INT 15H Initiates the INT 15H BIOS call D.3.2 Enable the DIO Output Function The BIOS interrupt call INT 15H controls the digital I/O. An assembly program to enable digital I/O output functions is listed below.
~~PAGE 207~~
~~SPCIE-C2260-i2 PICMG 1.~~
~~PAGE 208~~
SPCIE-C2260-i2 PICMG 1.3 CPU Card NOTE: The following discussion applies to DOS environment. Contact IEI support or visit the IEI website for specific drivers for other operating systems. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash. This condition may have occurred by external EMIs or a software bug.
~~PAGE 209~~
~~SPCIE-C2260-i2 PICMG 1.3 CPU Card NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets.~~
~~PAGE 210~~
~~SPCIE-C2260-i2 PICMG 1.~~
~~PAGE 211~~
SPCIE-C2260-i2 PICMG 1.3 CPU Card F.1 Introduction The SPCIE-C2260-i2 can provide data protection for serial ATA (SATA) disks via the Intel® Matrix Storage Manager using one of three fault-tolerant RAID levels: RAID 1, 5 or 10. When using two hard drives, matrix RAID allows RAID 0 and RAID 1 functions to be combined, where critical files can be stored on RAID 1, and RAID 0 can be used for non-critical items such as software.
~~PAGE 212~~
SPCIE-C2260-i2 PICMG 1.3 CPU Card CAUTION! Do not accidentally disconnect the SATA drive cables. Carefully route the cables within the chassis to avoid system down time. F.2 Features and Benefits Supports RAID levels 0, 1, 5 and 10 Supports connectivity to two or more disk drives Supported Operating Systems include: Windows XP, Windows Server 2003, Windows Server 2008, Windows Vista and Windows 7 F.
~~PAGE 213~~
SPCIE-C2260-i2 PICMG 1.3 CPU Card appear during the POST. Refer to the applicable BIOS configuration section in this user manual. Step 4: Save and Exit BIOS. After the SATA support option is enabled, save and exit the BIOS. Step 5: Reboot the system. Reboot the system after saving and exiting the BIOS. Step 6: Press Ctrl+I. during the system boot process. Press Ctrl+I when prompted to enter the RAID configuration software. Step 7: Configure the RAID settings.
~~PAGE 214~~
~~SPCIE-C2260-i2 PICMG 1.~~
~~PAGE 215~~
SPCIE-C2260-i2 PICMG 1.3 CPU Card G.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
~~PAGE 216~~
~~SPCIE-C2260-i2 PICMG 1.~~
~~PAGE 217~~
~~SPCIE-C2260-i2 PICMG 1.~~