TACTUM 4NTR 4.
User Manual – Tactum 4NTR – june 2011 THANK YOU AND CONGRATULATION: Thank you for the trust you have according to us buying the TACTUM 4NTR Remote Control. This device allows you to drive VITY “MBC” controllers, as well as drive directly KNX devices, RS232 / 422 / 485 devices and infrared devices. The LAN and Wi-Fi connection allows the user to drive IP devices as well as Internet and Intranet network connecting. This manual is made to help you during installation.
User Manual – Tactum 4NTR – june 2011 Security regulation & Approval CE – FCC conformity This device has been tested and approved conform to the class A and B digital device limits. WARNING: changes and modifications done by the user and not approved by the manufacturer could cancel the conformity and reduce authorization of using the TACTUM 4NTR remote control. Copyright VITY SAS ‘’TACTUM 4NTR STARTING GUIDE’’ All right reserved.
User Manual – Tactum 4NTR – june 2011 Contents 1. WHAT IS IN THE TACTUM 4NTR PACKAGE? ...........................................................................................................5 2. PRESENTATIONS OF THE TOUCH PANEL LCD 4.3” TACTUM 4NTR REMOTE CONTROL ...................................6 A. FEATURES ..........................................................................................................................................................................6 B. USE .............
User Manual – Tactum 4NTR – june 2011 1. What is in the TACTUM 4NTR package? - 1 pc TACTUM 4 NTR remote control 1 pc table stand 1 pc soft and flat network RJ 45 LAN cable of 2m 1 pc Power supply 100/240 DC – 12V DC 1 Amp 1 Pc bag containing: 1 camera shutter and 4 screws 13.4 mm for the TACTUM 4 NTR remote control fixation on the wall embedded case .
User Manual – Tactum 4NTR – june 2011 2. Presentations of the touch panel LCD 4.3” TACTUM 4NTR remote control The versatile touch panel TACTUM 4NTR remote control is suitable for current and future requirements. fitting current and intended demands. It may be wall or furniture embedded as well as just lay on a table.
User Manual – Tactum 4NTR – june 2011 B. Use After carefully unpack the TACTUM 4NTR remote control and checked all accessories showed on the first page of the manual are present: 1 – Connect the flexible and flat LAN cable to the Ethernet network RJ45 LAN plug at the back of the remote control. 2 – Connect the green power plug to the 12V DC1A port at the back of the remote control. Then, connect the supply to a 100-240V AC plug.
User Manual – Tactum 4NTR – june 2011 C. Special features Front Microphone Camera Programmable Lighting Priority buttons Speaker Speaker Motion detector Temperature detector Light detector Door USB port Infrared receiver On/Off Button Motion detector: Allows the remote control to get out of the standby mode when someone is coming within 2 meters from it. This detector can be programmed to act as a presence detector.
User Manual – Tactum 4NTR – june 2011 USB port: The USB port, behind the front trap door, is a USB 1.1. It is exclusively reserved for maintenance (updating applications). NOTE: It is not advice to try to connect peripheral devices, at the risk of damage the functionalities of the remote control. Rear 12VDC1A: Power supply plug allows to connect the 100/240 VAC power supply 12 VDC output or a separate 1236 volts DC power available on car, boat, train, plane).
User Manual – Tactum 4NTR – june 2011 KNX plug : KNX connection port allowing communication with all electric devices using KNX norm (configuration is done by the installer and is not explained in this manual). NOTE : Be careful to respect polarity – and + (they are print under the plug) Others WIFI: The TACTUM 4NTR remote control can communicate through WiFi 802.11b/g. (Configuration is done by the installer and is not explained in this manual).
User Manual – Tactum 4NTR – june 2011 Power Supply Consumption : 0,56 A @ 12VDC Standard Power Supply 110/240 VAC- 12 V DC Mode: 12/36 Volts DC power supply supported Certifications CE Class A-B, FCC Part 15 Class B RoHS IEC/EN-60950 Environment Working Temperature : 0°C à 50°C Storage temperature : -10° à 60° Humidity 5% to 90% RH (Not Condensed) Dimensions 174 (L) x 120 (H) x 62 (P) Weight 0.
User Manual – Tactum 4NTR – june 2011 E. Warranty WARNING: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions and local regulations. 1- VITY Warranty VITY Technology Headquarters, France and its subsidiary VITY Asia, warrant their products any defects in materials and workmanship for a period of 2 years from the date of the invoice. This warranty concerns products manufactured by VITY Technology.
User Manual – Tactum 4NTR – june 2011 9- Other Notice VITY reserves the right to modify or discontinue designs, specifications, warranties, prices, and policies without prior notice. VITY Technology 13 www.vity.
User Manual – Tactum 4NTR – june 2011 Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
