TUS3400 Panel PC IEI Technology Corp. MODEL: TUS3400 User Manual Page 1 Rev. 1.
TUS3400 Revision Date Version Changes 17 September, 2013 1.00 Initial release 11 November, 2016 1.
TUS3400 Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
TUS3400 Table of Contents 1. INTRODUCTION………………………………………………………………...5 1.1 OVERVIEW……………………………………………………………………….6 1.2 DIMENSIONS…………………………………….……………………………….7 1.3 SPECIFICATIONS………………………………….…………………………….9 2 UNPACKING………………………………………………………………………11 2.1 UNPACKING…………………………………………………………………….12 2.2 PACKING LIST………………………………………………………………….13 3 INSTALLATION …………………………………………………………………14 3.1 ANTI-STATIC PRECAUTIONS…………….………………………………….15 3.2 INSTALLATION PRECAUTIONS…………………………………………….15 3.
TUS3400 Chapter 1 1 Introduction Page 5
TUS3400 1.1 Overview Figure 1-1: TUS3400 Portable Computer The TUS3400 portable computer provides all the features of a PC. The TUS3400 provides wireless networking for integration into company/facility networks. The major external device connections include USB 3.0/2.0 and serial port connectors. Storage options include a 2.5” hard drive, allowing for flexibility in choosing solid state drives or traditional hard drives.
TUS3400 1.
TUS3400 TUS3400 Dimensions (mm) Page 8
TUS3400 1.3 Specifications The technical specifications for the TUS3400 system are listed in below table. Model Name MB Display TUS3400 SBC Model TRN-HM65-MB CPU 2nd Generation Intel® Core™i7-3555LE processor Chipset Intel HM65 RAM 2 x 4G DDR3 1333 SO-DIMM (Support ECC) LCD Size 15" Max Resolution 1024x768 Brightness (cd/m2) minimum of 300 nits Contrast Ratio 500:1 LCD Color 16.2M Pixel Pitch (mm) 0.297(H) x 0.
TUS3400 Construction PC+ABS Material Dimension (WxHxD) 388.3*395.6*88.45 (mm) Physical Weight 6.8kg a. Magnet size:30mm x 8mm x 6mm. Magnetic Latch b. Q'ty : 8pcs (B part*4, C part *4) c. Open/Close Force : 2.0kgf ~ 2.5kgf. Operation 0~35°C Temperature Environment Storage 0~60°C Temperature Battery SANYO UR18650FK, 11.1V, 5400mah, 3S2P=59.
TUS3400 Chapter 2 2 Unpacking Page 11
TUS3400 2.1 Unpacking To unpack the Portable Computer, follow the steps below: WARNING! The front side LCD screen has a protective plastic cover stuck to the screen. Only remove the plastic cover after the panel PC has been properly installed. This ensures the screen is protected during the installation process. Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the external (second) box. Step 2: Open the external (second) box.
TUS3400 2.2 Packing List The TUS3400 is shipped with the following components: Quantity Item 1 TUS3400 1 Power Adapter Remark (P/N: TRN-63040-010120-020-RS) Packing List If any of the above items are missing or damaged, contact the distributor or sales representative immediately.
TUS3400 Chapter 3 3 Page 14 Installation
TUS3400 3.1 Anti-static Precautions WARNING: Failure to take ESD precautions during the maintenance may result in permanent damage to the system and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the TUS3400. Dry climates are especially susceptible to ESD.
TUS3400 Anti-static Discharge: If a user open the portable computer to configure the jumpers or plug in added peripheral devices, ground themselves first and wear and anti-static wristband. 3.3 Preinstalled Components The following components are all preinstalled.
TUS3400 3.4 Removing the Back Cover Remove all the retention screws on the back cover. Lift the cover up to remove.
TUS3400 3.5 Removing the Console Remove all the retention screws on the chassis base. Lift the console up to remove.
TUS3400 Chapter 4 4 System Maintenance Page 19
TUS3400 4.1 System Maintenance Introduction The following system components may require maintenance. Motherboard SO-DIMM module Wifi module Cooling fans HDD If these components fail, they must be replaced. Please contact the system reseller or vendor to purchase replacement parts. Replacement instructions for the above listed components are described below. 4.2 Motherboard Replacement A user cannot replace a motherboard. If the motherboard fails it must be shipped back to IEI to be replaced.
TUS3400 4.4 Console Removal WARNING! Before removing the console, make sure all power to the system has been disconnected. Failing to do so may cause severe damage to the TUS3400 and injury to the user. WARNING! Please take antistatic precautions when working with the internal components. The interior of the TUS3400 contains very sensitive electronic components. These components are easily damaged by electrostatic discharge (ESD).
TUS3400 Step 4: Grasp the SO-DIMM module by the edges and carefully pull it out of the socket. Step 5: Install the new SO-DIMM module by pushing it into the socket at an angle (Figure 4-1). Step 6: Gently push the rear of the SO-DIMM module down (Figure 4-1). The spring retainer clips clip into place and secure the SO-DIMM module in the socket.
TUS3400 Chapter 5 A Safety Precautions Page 23
TUS3400 WARNING: The precautions outlined in this chapter should be strictly followed. Failure to follow these precautions may result in permanent damage to the system. A.1 Safety Precautions Please follow the safety precautions outlined in the sections that follow: A.1.1 General Safety Precautions Please ensure the following safety precautions are adhered to at all times. Follow the electrostatic precautions outlined below whenever the EP series is opened.
TUS3400 A.1.2 Anti-static Precautions WARNING: Failure to take ESD precautions during the installation of the system may result in permanent damage to the system and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the TUS3400. Dry climates are especially susceptible to ESD.
TUS3400 A.1.3 Product Disposal CAUTION: Risk of explosion if battery is replaced by and incorrect type. Only certified engineers should replace the on-board battery. Dispose of used batteries according to instructions and local regulations. Outside the European Union - If you wish to dispose of used electrical and electronic products outside the European Union, please contact your local authority so as to comply with the correct disposal method.
TUS3400 other components. To clean the LCD panel, gently wipe it with a piece of soft dry cloth or a slightly moistened cloth. The interior of the TUS3400 does not require cleaning. Keep fluids away from the EP series interior. Be cautious of all small removable components when vacuuming the TUS3400. Turn the TUS3400 off before cleaning it. Never drop any objects or liquids through the openings of the TUS3400.
TUS3400 device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference when the equipment is operate din a commercial environment. This equipment generates, uses, and can radiate radiofrequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
TUS3400 Chapter 6 B Hazardous Materials Disclosure Page 29
TUS3400 B.1 Hazardous Material Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
TUS3400 Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl Ethers (CR(VI)) (PBB) (PBDE) Housing X O O O O X Display X O O O O X Printed Circuit X O O O O X Metal Fasteners X O O O O O Cable Assembly X O O O O X Fan Assembly X O O O O X Power Supply X O O O O X O O O O O O Board Assemblies Battery O: This toxic or hazardous substa
TUS3400 此附件旨在确保本产品符合中国 RoHS 标准。 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 标准规定的限量要求。 本产品上会附有”环境友好使用期限 本产品上会附有 环境友好使用期限”的标签 环境友好使用期限 的标签, 的标签,此期限是估算这些物质”不会有泄漏或突变 此期限是估算这些物质 不会有泄漏或突变” 不会有泄漏或突变 的年限。 的年限。本产品可能包含有较短的环境友好使用期限的可替换元件, 本产品可能包含有较短的环境友好使用期限的可替换元件,像是电池或灯管, 像是电池或灯管,这 些元件将会单独标示出来。 些元件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 X O O O O X 显示 X O O O O X 印刷电路板 X O O O O X 金属螺帽 X O O O O O 电缆组装 X O O O O X 风扇组装 X O