User's Manual

TUS3400
Page 21
4.4 Console Removal
WARNING!
Before removing the console, make sure all power to the system
has been disconnected. Failing to do so may cause severe
damage to the TUS3400 and injury to the user.
WARNING!
Please take antistatic precautions when working with the internal
components. The interior of the TUS3400 contains very sensitive
electronic components. These components are easily damaged
by electrostatic discharge (ESD). Before working with the internal
components, make sure all anti-static precautions described
earlier have been observed.
To access the portable computer internal components, the console must be
removed. To remove the console, please refer to Section 599H
599H599H
599H 3.5 for console removal
instructions.
4.5 SO-DIMM Replacement
Please read the warnings at the beginning of the previous section before attempting
to access any TUS3400 internal components.
To install/replace the SO-DIMM modules, please follow the steps below.
Step 1: Remove the Console (Section 600H
600H600H
600H 3.5).
Step 2: Locate the SO-DIMM module on the motherboard.
Step 3: Release the SO-DIMM module by pulling both the spring retainer clips
outward from the socket.