User's Manual

uSmart3400
Page 21
4.4 Console Removal
WARNING!
Before removing the console, make sure all power to the system
has been disconnected. Failing to do so may cause severe
damage to the uSMART3400 and injury to the user.
WARNING!
Please take antistatic precautions when working with the internal
components. The interior of the uSMART3400 contains very
sensitive electronic components. These components are easily
damaged by electrostatic discharge (ESD). Before working with
the internal components, make sure all anti-static precautions
described earlier have been observed.
To access the portable computer internal components, the console must be
removed. To remove the console, please refer to Section 599H
599H599H
599H 錯誤! 找不到參照來源。 for
console removal instructions.
4.5 SO-DIMM Replacement
Please read the warnings at the beginning of the previous section before attempting
to access any uSMART3400 internal components.
To install/replace the SO-DIMM modules, please follow the steps below.
Step 1: Remove the Console (Section 600H
600H600H
600H 錯誤! 找不到參照來源。).
Step 2: Locate the SO-DIMM module on the motherboard.
Step 3: Release the SO-DIMM module by pulling both the spring retainer clips
outward from the socket.