User Manual
Table Of Contents
- WAFER-945GSE2
- 1 Introduction
- 2 Packing List
- 3 Connectors
- 3.1 Peripheral Interface Connectors
- 3.2 Internal Peripheral Connectors
- 3.2.1 ATX Power Connector
- 3.2.2 ATX Power Supply Enable Connector
- 3.2.3 Audio Connector (10-pin)
- 3.2.4 Backlight Inverter Connector
- 3.2.5 Battery Connector
- 3.2.6 CompactFlash® Socket
- 3.2.7 Digital Input/Output (DIO) Connector
- 3.2.8 Fan Connector (+12V, 3-pin)
- 3.2.9 Keyboard/Mouse Connector
- 3.2.10 LED Connector
- 3.2.11 LVDS LCD Connector
- 3.2.12 PC/104 Connector
- 3.2.13 PC/104 Power Input Connector
- 3.2.14 Power Button Connector
- 3.2.15 Reset Button Connector
- 3.2.16 SATA Drive Connectors
- 3.2.17 Serial Port Connector, RS-232/422/485
- 3.2.18 SPI Flash Connector
- 3.2.19 USB Connectors (Internal)
- 3.3 External Peripheral Interface Connector Panel
- 4 Installation
- 5 BIOS
- 6 Software Drivers
- A BIOS Options
- B One Key Recovery
- C Terminology
- D Digital I/O Interface
- E Watchdog Timer
- F Hazardous Materials Disclosure
WAFER-945GSE2 3.5" Motherboard
Page 16
3.1.2 Peripheral Interface Connectors
The table below lists all the connectors on the board.
Connector Type Label
ATX enable connector 3-pin wafer ATXCTL1
ATX power connector 4-pin ATX ATXPWR1
Audio connector 10-pin header AUDIO1
Backlight inverter connector 5-pin wafer INVERTER1
Battery connector 2-pin wafer BAT1
CompactFlash® socket 50-pin CF socket CF1
Digital input/output (DIO) connector 10-pin header DIO1
Fan connector 3-pin wafer CPU_FAN1
Keyboard and mouse connector 6-pin wafer KB_MS1
LED connector 6-pin header LED_C1
LVDS connector 30-pin crimp LVDS1
PC/104 connector
104-pin ISA bus CN2
PC/104 power input connector
3-pin CN1
Power button connector 2-pin wafer PWRBTN1
Reset button connector 2-pin header RESET1
RS-232/422/485 serial port connector 14-pin header COM2
Serial ATA (SATA) drive connectors 7-pin SATA SATA1, SATA2
SPI flash connector 8-pin header JSPI1
USB 2.0 connectors 8-pin header USB01, USB23
Table 3-1: Peripheral Interface Connectors