User Manual

WAFER-945GSELVDS2
Page 57
Figure 4-11: Audio Kit Cable Connection
Step 3: Connect the audio devices. Connect speakers to the line-out audio jack.
Connect the output of an audio device to the line-in audio jack. Connect a
microphone to the mic-in audio jack.Step 0:
4.8.2 SATA Drive Connection
The WAFER-945GSELVDS2 is shipped with two SATA drive cables and one SATA drive
power cable. To connect the SATA drives to the connectors, please follow the steps
below.
Step 1: Locate the connectors. The locations of the SATA drive connectors are shown
in Chapter 3.