User's Manual

CNR-CPO-8500T Patient Observer
Page 41
4.4.1.2 Graphics Configuration
Use the Graphics Configuration (BIOS Menu 14) menu to configure the video device
connected to the system.
Aptio Setup Utility
–
Copyright (C)
2019
American Megatrends, Inc.
Chipset
Graphics Configuration
Internal Graphics [Enabled]
DVMT Pre-Allocated [32M]
DVMT Total Gfx Mem [MAX]
Keep IGFX enabled based on
the setup options. If user want
to support Dual Display by
Internal Graphics & External
Graphics. Internal Graphics
item should be set to Enabled
and Primary Display item
should be set to IGFX.
----------------------
 : Select Screen
↑ ↓ : Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Version 2.20.1271. Copyright (C)
2019
American Megatrends, Inc.
BIOS Menu 14: Graphics Configuration
 Internal Graphics [Enabled]
Use the Internal Graphics option to configure whether to keep IGFX enabled. If user
wants to support dual display by internal graphics and external graphics, this Internal
Graphics option should be set to Enabled and the above Primary Display option should be
set to IGFX.

Auto Auto mode

Disabled Disables IGFX.

Enabled D EFAULT Enables IGFX.
 DVMT Pre-Allocated [32M]
Use the DVMT Pre-Allocated option to set the amount of system memory allocated to the
integrated graphics processor when the system boots. The system memory allocated can